Daverods project 66 - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Strodder · 06-23-2009, 10:59 AM

Notice I haven't flipped the axle yet.

daverod · 06-23-2009, 01:01 PM

Just found a c notch for $117 it on the way.

It's just a small notch.

Not that I did'nt want the monster.

Now all I have to do is figure out springs or bags. The bags in the front just fit right in no special plates or anything? Why are the spindles from ccp so much cheaper?

daverod · 06-25-2009, 09:23 AM

I'm pissed saw a notch on ebay for cheaper an hour after I bought mine.

Strodder · 06-25-2009, 09:07 PM

Quote:

Originally Posted by daverod

I'm pissed saw a notch on ebay for cheaper an hour after I bought mine.

That's too bad.

daverod · 06-25-2009, 09:23 PM

Too: In addition:also:to such a degree as to be regrettable.

I Learn somthing every day.

One thing about this place it helps my spelling and grammar. Now if I could only learn somthing that would help me get my truck done.

Did you get the other side of your truck done or just pull weeds all day?

Strodder · 06-25-2009, 09:29 PM

That notch was done 6 years ago when I had my shop Sportruck Specialties. I used to show customers that picture to show them the difference. And how I was going to butcher up there frame.

My weeds are already picked. When I pick um, they stay picked if they know what's good for them.

daverod · 06-25-2009, 09:33 PM

I did'nt think that was your truck. I hate weeds too.

Most the time I burn them.

Just kiddin

Should get my notch Tuesday I'm

daverod · 06-27-2009, 11:47 PM

Got sick of sanding. I had an extra cross member laying around thought I would make a drop. It cut out easier than I thought. I think putting it back together is going to be the trick. A couple of tack welds and some of that good Rage filler should do the trick.

joe231 · 06-28-2009, 12:20 AM

Strodder · 06-28-2009, 10:59 AM

It's going to be interesting to see how you will attach it to the frame. Where did you get the idea from?

daverod · 06-28-2009, 11:40 AM

Just somthing I came up with. Not. It was on the XMEMBER FAB QUESTION thread.

daverod · 06-28-2009, 11:46 AM

I don't know if I'll use it I was just bored.

daverod · 06-28-2009, 11:59 AM

I never really got that far in my thought process. Wouldnt you just drill new holes 1 1/2" higher then the old holes. It lookes you would have to fill in the big holes?

What are the big holes for?

Strodder · 06-28-2009, 12:00 PM

Quote:

Originally Posted by daverod

Just somthing I came up with. Not. It was on the XMEMBER FAB QUESTION thread.

Got a link?

daverod · 06-28-2009, 12:01 PM

To stupid. It's like the 19th thread down on the front page.

Strodder · 06-28-2009, 12:02 PM

Quote:

Originally Posted by daverod

I never really got that far in my thought process. Wouldnt you just drill new holes 1 1/2" higher then the old holes. It lookes you would have to fill in the big holes?

What are the big holes for?

Looks like there will be a lot more fabing involved. Remember this is a SAFETY ISSUE

Strodder · 06-28-2009, 12:04 PM

Quote:

Originally Posted by daverod

To stupid. It's like the 19th thread down on the front page.

I couldn't find the thread. Give me that link. Copy from the address line and paste it on your reply.

daverod · 06-28-2009, 01:19 PM

Here you go. well that did'nt work?http://www.captkaoscustoms.com/chopcross.html Damn I'm good. I should be a web designer or somthing.http://www.67-72chevytrucks.com/vboa...d.php?t=273722

daverod · 06-28-2009, 01:32 PM

http://67-72chevytrucks.com/vboard/s...d.php?t=267665 This guy did one also. Shows some more realistic pictures.

I like the fabing part it's the bodywork I hate.

protrash64 · 06-28-2009, 03:43 PM

right here, Strodder.....posted wrong before.http://67-72chevytrucks.com/vboard/s...d.php?t=350230

Strodder · 06-28-2009, 05:02 PM

Thanks. Looks like a good idea to get it to drop down that extra 1 1/2". With bags it would give you that extra clearance too.

daverod · 06-28-2009, 08:36 PM

Thanks Trash I'm still learning. Hay, I learn how to done a link today.

Any idea what the big holes in the frame are for. I think I need to weld them shut and drill new holes to mount the member it to the frame? Anyone, anyone,

protrash64 · 06-28-2009, 08:41 PM

whats funny is that I did it earlier and posted a link on the same thread I was reading (the xmember thread)

.

daverod · 06-28-2009, 08:47 PM

Did alittle grinding this morning. Still needs more work. Arms are to sore to work on it tonight. Spent the day wakeboarding. First time this year.

daverod · 06-28-2009, 08:49 PM

Quote:

Originally Posted by daverod

Thanks Trash I'm still learning. Hay, I learn how to done a link today.

Any idea what the big holes in the frame are for. I think I need to weld them shut and drill new holes to mount the member it to the frame? Anyone, anyone,

How to do a link. Still hav'nt learn to spell

06-23-2009, 10:59 AM	#226
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Notice I haven't flipped the axle yet. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

06-23-2009, 01:01 PM	#227
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Just found a c notch for $117 it on the way. It's just a small notch. Not that I did'nt want the monster. Now all I have to do is figure out springs or bags. The bags in the front just fit right in no special plates or anything? Why are the spindles from ccp so much cheaper?

06-25-2009, 09:23 AM	#228
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 I'm pissed saw a notch on ebay for cheaper an hour after I bought mine.

06-25-2009, 09:23 PM	#230
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Too: In addition:also:to such a degree as to be regrettable. I Learn somthing every day. One thing about this place it helps my spelling and grammar. Now if I could only learn somthing that would help me get my truck done. Did you get the other side of your truck done or just pull weeds all day?

06-25-2009, 09:29 PM	#231
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 That notch was done 6 years ago when I had my shop Sportruck Specialties. I used to show customers that picture to show them the difference. And how I was going to butcher up there frame. My weeds are already picked. When I pick um, they stay picked if they know what's good for them. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

06-25-2009, 09:33 PM	#232
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 I did'nt think that was your truck. I hate weeds too. Most the time I burn them. Just kiddin Should get my notch Tuesday I'm

06-27-2009, 11:47 PM	#233
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Got sick of sanding. I had an extra cross member laying around thought I would make a drop. It cut out easier than I thought. I think putting it back together is going to be the trick. A couple of tack welds and some of that good Rage filler should do the trick. Attached Images

06-28-2009, 12:20 AM	#234
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Daverods project 66 __________________ *CHEVY ONLY*

06-28-2009, 10:59 AM	#235
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 It's going to be interesting to see how you will attach it to the frame. Where did you get the idea from? __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

06-28-2009, 11:40 AM	#236
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Just somthing I came up with. Not. It was on the XMEMBER FAB QUESTION thread. Last edited by daverod; 06-28-2009 at 11:41 AM.

06-28-2009, 11:46 AM	#237
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 I don't know if I'll use it I was just bored.

06-28-2009, 11:59 AM	#238
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 I never really got that far in my thought process. Wouldnt you just drill new holes 1 1/2" higher then the old holes. It lookes you would have to fill in the big holes? What are the big holes for? Attached Images Last edited by daverod; 06-28-2009 at 12:00 PM.

06-28-2009, 12:01 PM	#240
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 To stupid. It's like the 19th thread down on the front page.

06-28-2009, 01:19 PM	#243
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Here you go. well that did'nt work?http://www.captkaoscustoms.com/chopcross.html Damn I'm good. I should be a web designer or somthing.http://www.67-72chevytrucks.com/vboa...d.php?t=273722 Last edited by daverod; 06-28-2009 at 01:23 PM.

06-28-2009, 01:32 PM	#244
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 http://67-72chevytrucks.com/vboard/s...d.php?t=267665 This guy did one also. Shows some more realistic pictures. I like the fabing part it's the bodywork I hate. Last edited by daverod; 06-28-2009 at 01:33 PM.



Register or Log In To remove these advertisements.

06-28-2009, 03:43 PM	#245
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: Daverods project 66 right here, Strodder.....posted wrong before.http://67-72chevytrucks.com/vboard/s...d.php?t=350230 __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

06-28-2009, 05:02 PM	#246
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Thanks. Looks like a good idea to get it to drop down that extra 1 1/2". With bags it would give you that extra clearance too. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

06-28-2009, 08:36 PM	#247
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Thanks Trash I'm still learning. Hay, I learn how to done a link today. Any idea what the big holes in the frame are for. I think I need to weld them shut and drill new holes to mount the member it to the frame? Anyone, anyone, Last edited by daverod; 06-28-2009 at 08:37 PM.

06-28-2009, 08:41 PM	#248
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: Daverods project 66 whats funny is that I did it earlier and posted a link on the same thread I was reading (the xmember thread). __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

06-28-2009, 08:47 PM	#249
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Did alittle grinding this morning. Still needs more work. Arms are to sore to work on it tonight. Spent the day wakeboarding. First time this year. Attached Images Last edited by daverod; 06-28-2009 at 08:48 PM.

Register or Log In To remove these advertisements.