AZ 55-59 parts - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DransportGarage · 09-19-2017, 10:52 AM

Quote:

Originally Posted by DransportGarage

Do you have any '55-'57 front fender extensions? I need a pair. Thanks, -Bob

I need 'em for a 3100.

jsea468chevytruck · 10-07-2017, 06:59 PM

Rt and Lft steps with brackets. For 57 short bed? Thanks

DransportGarage · 10-11-2017, 05:39 PM

I need a lower grille bar (which I would call a "splash pan"), and both bed steps (in front of the rear fenders) for a '55 2nd series short bed. Can you help?

I no longer need the front fender extensions that I asked about above -- I salvaged my old ones). Thanks, -Bob

**Andy_Napco** · 10-27-2017, 09:54 PM

Looking for 4 rims for my ‘55 Suburban. 15 x 5.5 or 16x 5.0 with 6 lugs. Just to get it up off the ground and rolling.
Posted via Mobile Device

NVS-C10 · 10-31-2017, 02:43 PM

I'm looking for a rear stepside bumper..

Steveoreno · 12-12-2017, 10:59 PM

Do you carry hub caps? I am looking for 1959 caps for 16" wheels (1/2 ton NAPCO). It would be great to find a set with the hole for the 4wd hubs. Thanks a million. -Steve-

**t korinek** · 12-13-2017, 12:10 AM

Sorry I haven’t had any replies for you guys,I damn near sold all the 55 to 59 parts that I had at the beginning of this thread as it’s been a couple years and haven’t found any new trucks to replenish my stash of these years parts
Thanks
Tom

Steveoreno · 12-13-2017, 07:25 AM

OK Tom, thanks for getting back! -Steve-

Missyblue · 01-11-2018, 01:32 PM

Possibly have a good chrome rear bumper for a 57 gmc? And I attached a photo. Don't know What to call it but it's the painted piece that sits above the front bumper I'm missing too.
Thanks

LDO · 01-12-2018, 05:22 PM

I am looking for 2 division bars and the upper guide rail for my 57. Trying to do the one piece glass mod without cutting up the nice vent windows I currently have.

01spirit750 · 02-09-2018, 03:10 PM

Looking for the clutch pivot support assembly that mounts to the frame for a 55-59 truck.
P/N 3711704.

Thanks

**Andy_Napco** · 02-18-2018, 11:47 PM

Looking for the front most spring perch for the front spring of a Task Force truck. Need drivers side, fits within the frame rail.

Thanks,
Andy T.
Posted via Mobile Device

**Andy_Napco** · 02-19-2018, 12:54 AM

Looking for the front most spring perch for the front spring of a Task Force truck. Need drivers side, fits within the frame rail.

Thanks,
Andy T.
Posted via Mobile Device

bigdaddyfuselier · 03-19-2018, 08:56 PM

You have any GMC hoods? I may need front and rear fenders. Pictures and price please.

62 Barnfind · 03-20-2018, 08:20 PM

I'm looking for a upper mustache 3 piece grill for 55 GMC in chrome. Do you have one?

**t korinek** · 03-21-2018, 12:50 AM

No gmc grill parts or moustache

I might have a gmc grill, what year front fenders do you need?

bigdaddyfuselier · 04-02-2018, 11:14 PM

looking for exterior visor for 1955.2 chevy truck

62 Barnfind · 04-15-2018, 12:54 PM

Quote:

Originally Posted by t korinek

no gmc grill parts or moustache

i might have a gmc grill, what year front fenders do you need?

55

Yewhi · 04-13-2018, 12:28 AM

I need a set of rear shock mounts for a 55-59 pickup. Both top and bottom.

Any available?

bigdaddyfuselier · 05-09-2018, 10:10 PM

looking for exterior sun visor for 1955.2 GMC truck

**paulspickupparts** · 06-08-2018, 06:37 PM

Quote:

Originally Posted by bigdaddyfuselier

looking for exterior sun visor for 1955.2 GMC truck

There is an original on ebay. Every dealer sells the knockoffs

BBPanel · 06-08-2018, 07:17 PM

Quote:

Originally Posted by paulspickupparts

There is an original on ebay. Every dealer sells the knockoffs

If its this one that looks like a repo also:
https://www.ebay.com/itm/1955-1956-1...UAAOSwx6pYrhBg

**paulspickupparts** · 06-09-2018, 08:09 AM

Quote:

Originally Posted by BBPanel

If its this one that looks like a repo also:
https://www.ebay.com/itm/1955-1956-1...UAAOSwx6pYrhBg

No , thats the repo that everyone sells. Looks like the original has sold on auction. I had it in my watch list . Looks like a good original is bringing about $665 . I have seen them sell for more.

https://www.ebay.com/itm/OEM-1955-19...ta9l~n&vxp=mtr

ARCTECH · 05-20-2018, 12:12 PM

Tom andrew in maine here
looking for a 58-59 fleet bed long or short
or stepside for up to 66 i belive
got anything? Thanks

**t korinek** · 05-20-2018, 12:30 PM

Hey Andrew, no complete beds, I have a pair of stepside fenders & that’s about it.

No visors

No gmc grills

Thanks
Tom

10-07-2017, 06:59 PM	#2
jsea468chevytruck Registered User Join Date: Nov 2014 Location: Naalehu Hawaii Posts: 3	Re: 55-59 parts Rt and Lft steps with brackets. For 57 short bed? Thanks

10-11-2017, 05:39 PM	#3
DransportGarage Registered User Join Date: Feb 2010 Location: Lebanon, Ohio Posts: 1,359	Re: 55-59 parts I need a lower grille bar (which I would call a "splash pan"), and both bed steps (in front of the rear fenders) for a '55 2nd series short bed. Can you help? I no longer need the front fender extensions that I asked about above -- I salvaged my old ones). Thanks, -Bob __________________ Bob "It won't take long and it won't cost much." '55 3100 (383/700R4)--'55 Belair Sedan (350/4-speed)--'64 'Vette Conv. (327/4-speed)--'68 GTO Conv. (462/4-speed)--'69 Cutlass Conv. (350/TH350)--'06 'Vette Conv. (LS2/6-speed) Bob's Retirement Build - My 55 TF Bob's 700R4 Build (how-to)

10-27-2017, 09:54 PM	#4
Andy_Napco Junior Member Join Date: Apr 2011 Location: Benicia, California Posts: 40	Re: 55-59 parts Looking for 4 rims for my ‘55 Suburban. 15 x 5.5 or 16x 5.0 with 6 lugs. Just to get it up off the ground and rolling. Posted via Mobile Device

10-31-2017, 02:43 PM	#5
NVS-C10 Registered User Join Date: Mar 2014 Location: Rosemead, CA Posts: 419	Re: 55-59 parts I'm looking for a rear stepside bumper..

12-12-2017, 10:59 PM	#6
Steveoreno Registered User Join Date: Mar 2011 Location: Penn Yan, NY Posts: 57	Re: 55-59 parts Do you carry hub caps? I am looking for 1959 caps for 16" wheels (1/2 ton NAPCO). It would be great to find a set with the hole for the 4wd hubs. Thanks a million. -Steve-

12-13-2017, 12:10 AM	#7
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 55-59 parts Sorry I haven’t had any replies for you guys,I damn near sold all the 55 to 59 parts that I had at the beginning of this thread as it’s been a couple years and haven’t found any new trucks to replenish my stash of these years parts Thanks Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

12-13-2017, 07:25 AM	#8
Steveoreno Registered User Join Date: Mar 2011 Location: Penn Yan, NY Posts: 57	Re: 55-59 parts OK Tom, thanks for getting back! -Steve-

01-11-2018, 01:32 PM	#9
Missyblue Registered User Join Date: Jul 2017 Location: Fruita, co Posts: 243	Re: 55-59 parts Possibly have a good chrome rear bumper for a 57 gmc? And I attached a photo. Don't know What to call it but it's the painted piece that sits above the front bumper I'm missing too. Thanks Attached Images

01-12-2018, 05:22 PM	#10
LDO Registered User Join Date: Feb 2011 Location: Senatobia, MS Posts: 1,294	Re: 55-59 parts I am looking for 2 division bars and the upper guide rail for my 57. Trying to do the one piece glass mod without cutting up the nice vent windows I currently have. __________________ Once a Marine, always a Marine! My (Her) 57 Build "Beverly" My 66 Build "Betty" My 85 C10 "Old Blue" Help Me Find "Old Blue" OLD BLUE PART II

02-09-2018, 03:10 PM	#11
01spirit750 Registered User Join Date: Oct 2010 Location: Bay Area California Posts: 137	Re: 55-59 parts Looking for the clutch pivot support assembly that mounts to the frame for a 55-59 truck. P/N 3711704. Thanks

02-18-2018, 11:47 PM	#12
Andy_Napco Junior Member Join Date: Apr 2011 Location: Benicia, California Posts: 40	Re: 55-59 parts Looking for the front most spring perch for the front spring of a Task Force truck. Need drivers side, fits within the frame rail. Thanks, Andy T. Posted via Mobile Device

02-19-2018, 12:54 AM	#13
Andy_Napco Junior Member Join Date: Apr 2011 Location: Benicia, California Posts: 40	Re: 55-59 parts Looking for the front most spring perch for the front spring of a Task Force truck. Need drivers side, fits within the frame rail. Thanks, Andy T. Posted via Mobile Device

03-19-2018, 08:56 PM	#14
bigdaddyfuselier Registered User Join Date: Mar 2018 Location: Lake Charles, Louisiana Posts: 7	Re: 55-59 parts You have any GMC hoods? I may need front and rear fenders. Pictures and price please.

03-20-2018, 08:20 PM	#15
62 Barnfind Registered User Join Date: Jan 2012 Location: Killeen, Tx Posts: 1,351	Re: 55-59 parts I'm looking for a upper mustache 3 piece grill for 55 GMC in chrome. Do you have one? __________________ John Z 1962 Chevy C10 Stepside 62 Barnfind My build tread: http://67-72chevytrucks.com/vboard/s...d.php?t=507513

03-21-2018, 12:50 AM	#16
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 55-59 parts No gmc grill parts or moustache I might have a gmc grill, what year front fenders do you need? __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!



Register or Log In To remove these advertisements.

04-02-2018, 11:14 PM	#17
bigdaddyfuselier Registered User Join Date: Mar 2018 Location: Lake Charles, Louisiana Posts: 7	Re: 55-59 parts looking for exterior visor for 1955.2 chevy truck

04-13-2018, 12:28 AM	#19
Yewhi Registered User Join Date: Oct 2012 Location: San Diego, CA Posts: 117	Re: 55-59 parts I need a set of rear shock mounts for a 55-59 pickup. Both top and bottom. Any available?

05-09-2018, 10:10 PM	#20
bigdaddyfuselier Registered User Join Date: Mar 2018 Location: Lake Charles, Louisiana Posts: 7	Re: 55-59 parts looking for exterior sun visor for 1955.2 GMC truck

05-20-2018, 12:12 PM	#24
ARCTECH Registered User Join Date: Jan 2017 Location: CORNISH MAINE Posts: 26	Re: 55-59 parts Tom andrew in maine here looking for a 58-59 fleet bed long or short or stepside for up to 66 i belive got anything? Thanks

05-20-2018, 12:30 PM	#25
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 55-59 parts Hey Andrew, no complete beds, I have a pair of stepside fenders & that’s about it. No visors No gmc grills Thanks Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

Register or Log In To remove these advertisements.