Blood Sweat and Tears.. 67 Build Thread - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Possmguts · 10-29-2017, 03:07 PM

Quote:

Originally Posted by thetucks

have you done anything with the power windows kit you bought yet? just curious how well it works.

No I haven't got that far yet. Probably wont do anything until I have color on the truck...

Possmguts · 10-29-2017, 03:14 PM

I have what Im trying to use as front inner fenders now. Wont be able to get to them for a while though, but I think its gonna look good. Gotta widen them a bunch to make the room for turning and travel though. Trying to get the tailgate wrapped up and sealed before I split again for now.

**Advanced Design** · 10-29-2017, 04:39 PM

Those inner fenders will look good once you fit them in place. Cool...match to radiator filler panel.

thetucks · 10-29-2017, 09:28 PM

I really like the core support filler panels. I may have to do something like that.

**GR8-68** · 10-29-2017, 10:17 PM

Quote:

Originally Posted by thetucks

I really like the core support filler panels. I may have to do something like that.

They are available on ebay

thetucks · 11-02-2017, 09:00 PM

Quote:

Originally Posted by Possmguts

No I haven't got that far yet. Probably wont do anything until I have color on the truck...

would it be too much to ask you to scan me a copy of the instructions and the template?

Possmguts · 11-03-2017, 08:24 AM

Quote:

Originally Posted by GR8-68

They are available on ebay

If you're looking for the Oval Dimples then look up TheModShop on ebay... they make them... I dont know that Ive seen anyone else with the Ovals. Usually they are just round dimples or just bead rolled...

Possmguts · 11-03-2017, 08:26 AM

Quote:

Originally Posted by thetucks

would it be too much to ask you to scan me a copy of the instructions and the template?

I would love to help you but I wont be home for about a month, and even then I'm not sure I even have instructions or templates with it. My kit is missing a bracket I have to make as well... Ill try to remember to look when I get home again.

Possmguts · 11-03-2017, 08:28 AM

Quote:

Originally Posted by Advanced Design

Those inner fenders will look good once you fit them in place. Cool...match to radiator filler panel.

Yeah thanks... gonna take some work but I think I can get them to work. Hope all is well with you, I haven't been on here as much as usual.

Possmguts · 11-03-2017, 08:32 AM

Well I got a new work toy, what do you think? 2000 Pete with a 6nz Cat and 18 speed. It just underwent a full frame off restoration as well. Its like a brand new Pre-Emissions truck

No more DEF issues for me

I think Im gonna paint the c10 to match it....

BossHogg69 · 11-03-2017, 08:41 AM

I wouldn't get anything done on my C10 if I had that Pete! I'd be out cruising that bad boy!!

That is one killer big rig!

Possmguts · 11-03-2017, 08:47 AM

Quote:

Originally Posted by BossHogg69

I wouldn't get anything done on my C10 if I had that Pete! I'd be out cruising that bad boy!!

That is one killer big rig!

lol Thanks... I hardly get anything done as it is being OTR like I am... but Im saving money with the lower payments over the actual new truck I was in and wont be in the shop having the same crap fixed over and over again with the emissions junk all over it.

68Gold/white · 11-03-2017, 10:04 AM

How do you run a plug wire loom with the center bolt valve covers??? I'm helping a friend, someone put a crate engine in his old ride, and the plugs wires were run over the top. I' don't really want to try to describe how messed up the plug wire install is...........

**Advanced Design** · 11-03-2017, 11:01 AM

Quote:

Originally Posted by Possmguts

Well I got a new work toy, what do you think? 2000 Pete with a 6nz Cat and 18 speed. It just underwent a full frame off restoration as well. Its like a brand new Pre-Emissions truck

No more DEF issues for me

I think Im gonna paint the c10 to match it....

That Pete is gorgeous! Wow! More pics? What do you Haul and where do you go? My hats off to the professional truckers.....

Possmguts · 11-03-2017, 11:11 AM

Quote:

Originally Posted by 68Gold/white

How do you run a plug wire loom with the center bolt valve covers??? I'm helping a friend, someone put a crate engine in his old ride, and the plugs wires were run over the top. I' don't really want to try to describe how messed up the plug wire install is...........

I guess Ill cross that bridge when I get to it... Im probably gonna do something under the headers somehow

Possmguts · 11-03-2017, 11:18 AM

Quote:

Originally Posted by Advanced Design

That Pete is gorgeous! Wow! More pics? What do you Haul and where do you go? My hats off to the professional truckers.....

Thank you sir... Im like a kid in a candy store right now... Cant wipe the smile off with Ajax lol I pull hazmat tankers now... no baffles... makes it fun. Im out of the Pittsburgh area and go where ever

flashed · 11-03-2017, 12:19 PM

DAMN ,that is NICE .

lower50's · 11-07-2017, 02:36 AM

Nice Pete. Where did you get the work done? My good friend Joe works for 12ga customs they had a truck at Sema this year.
http://www.12gacustoms.com/

Possmguts · 11-13-2017, 10:35 PM

Well... its a long story but I backed out the deal with the Pete at the last minute before signing... Not happy about it but I think its best for now. She was pretty... but after reading the fine print I just couldnt go thru with the deal.

Anyway... I have some pretty cool stuff going on with the c10 Ill be working on while home this weekend... Ill try to post a few pics as I go.

Possmguts · 01-22-2018, 11:17 PM

Fuel system and pulley and belt setup done...

flashed · 01-22-2018, 11:31 PM

Looks great .

lower50's · 01-23-2018, 08:53 AM

Nice!! is that a fuel filter above the water pump?

**RRR18** · 07-14-2019, 04:15 PM

What’s happenin here..??!!

10-29-2017, 03:14 PM	#452
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	Re: Blood Sweat and Tears.. 67 Build Thread I have what Im trying to use as front inner fenders now. Wont be able to get to them for a while though, but I think its gonna look good. Gotta widen them a bunch to make the room for turning and travel though. Trying to get the tailgate wrapped up and sealed before I split again for now. Attached Images __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8

10-29-2017, 04:39 PM	#453
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: Blood Sweat and Tears.. 67 Build Thread Those inner fenders will look good once you fit them in place. Cool...match to radiator filler panel. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

10-29-2017, 09:28 PM	#454
thetucks Registered User Join Date: Nov 2011 Location: Grand Lake Oklahoma Posts: 181	Re: Blood Sweat and Tears.. 67 Build Thread I really like the core support filler panels. I may have to do something like that.

11-03-2017, 08:32 AM	#460
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	Re: Blood Sweat and Tears.. 67 Build Thread Well I got a new work toy, what do you think? 2000 Pete with a 6nz Cat and 18 speed. It just underwent a full frame off restoration as well. Its like a brand new Pre-Emissions truck No more DEF issues for me I think Im gonna paint the c10 to match it.... Attached Images __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8

11-03-2017, 08:41 AM	#461
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Blood Sweat and Tears.. 67 Build Thread I wouldn't get anything done on my C10 if I had that Pete! I'd be out cruising that bad boy!! That is one killer big rig! __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

11-03-2017, 10:04 AM	#463
68Gold/white Registered User Join Date: Sep 2011 Location: Ark City, Kansas Posts: 3,271	Re: Blood Sweat and Tears.. 67 Build Thread How do you run a plug wire loom with the center bolt valve covers??? I'm helping a friend, someone put a crate engine in his old ride, and the plugs wires were run over the top. I' don't really want to try to describe how messed up the plug wire install is...........

11-03-2017, 12:19 PM	#467
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,729	Re: Blood Sweat and Tears.. 67 Build Thread DAMN ,that is NICE .

11-07-2017, 02:36 AM	#468
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: Blood Sweat and Tears.. 67 Build Thread Nice Pete. Where did you get the work done? My good friend Joe works for 12ga customs they had a truck at Sema this year. http://www.12gacustoms.com/ __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

11-13-2017, 10:35 PM	#469
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	Re: Blood Sweat and Tears.. 67 Build Thread Well... its a long story but I backed out the deal with the Pete at the last minute before signing... Not happy about it but I think its best for now. She was pretty... but after reading the fine print I just couldnt go thru with the deal. Anyway... I have some pretty cool stuff going on with the c10 Ill be working on while home this weekend... Ill try to post a few pics as I go. __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8

01-22-2018, 11:17 PM	#470
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	Re: Blood Sweat and Tears.. 67 Build Thread Fuel system and pulley and belt setup done... Attached Images __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8

01-22-2018, 11:31 PM	#471
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,729	Re: Blood Sweat and Tears.. 67 Build Thread Looks great .

01-23-2018, 08:53 AM	#472
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: Blood Sweat and Tears.. 67 Build Thread Nice!! is that a fuel filter above the water pump? __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

07-14-2019, 04:15 PM	#473
RRR18 Senior Member Join Date: Nov 2010 Location: Lordstown, OH / Wentzville, MO Posts: 870	Re: Blood Sweat and Tears.. 67 Build Thread What’s happenin here..??!! __________________ '67 BAD IDEA Follow on Instagram https://www.instagram.com/rtimes3c10/ Ryan

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.