Tremec in a 66 c10

[truckin66]

Originally Posted by Captainfab

I believe the cast fork will work in the 621 bellhousing, but I can't say for certain having not done that. If it were mine, I would use the stamped fork that would typically be used with the bellhousing and just shorten the pushrod between the bellcrank and the fork. you will also need a different end on the pushrod to mate up with the stamped fork.

What stamped fork would you use? A camaro one? There seems to be quite a few different forks out there. What are you running for a bell in your truck?