The 1947 - Present Chevrolet & GMC Truck Message Board Network

Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > WIW


Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-09-2020, 11:16 AM   #1
Senior Member
Ironhorse's Avatar
Join Date: Jul 2001
Location: Wellington, Ks
Posts: 8,309
8' Upper Bed Moldings w/Clips?

Would like some thoughts on the WIW question for both sides of the upper bed side molding from an 8' bed. NO major dings or added screws, fit bed quite well with no pulled or bent sections. Was all held in place by the original GM clips which I have also. Removed from '70 3/4 ton and used the clips, not the later sticky adhesive clips GM went to I believe in '72. Driver quality with some minor nicks, nothing major at all. End short molding sections tight with the connecting pieces intact. 12 clips per side, total of 24. One side had one style of clips, other side had another style. Truck showed no signs of a re-paint, do not know whey two different styles on same truck? Two clips have the spring tang missing but think could still be used. Maybe with a dab of silicon?.
Attached Images
1971 Chevy 1/2T 4x4 LWB 350 V-8
Was sm465-now 350TH/np205
Tilt, Tach, Towhooks
Original Truck AM/FM
Wellington, Ks
Ironhorse is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 03:45 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright 1997-2020