center ac vent - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mcarwile1 · 05-14-2007, 07:38 PM

Does anyone know how the center ac vent on the dash comes out?

GREASEMONKEY72 · 05-14-2007, 07:57 PM

hammer?

92470 · 05-14-2007, 09:28 PM

The center vent has 2 bolts that hold it in. They are screwed in from the back of the dash into threaded holes in the back of the vent itself. Remove the cardboard glove box to gain access. The right one can be removed with little difficulty, the left is more of a pain, but you can do it with an end wrench.

The new vent just goes back in reverse order. Don't forget the foam gasket that goes around it when you install. It's a cheap fix, and the new chrome really improves the look of the dash as well. Good luck.

05-14-2007, 07:38 PM	#1
mcarwile1 Registered User Join Date: May 2007 Location: Amelia, Virginia Posts: 2	center ac vent Does anyone know how the center ac vent on the dash comes out?

05-14-2007, 07:57 PM	#2
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: center ac vent hammer? __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

05-14-2007, 09:28 PM	#3
92470 Registered User Join Date: Nov 2006 Location: Maple Grove, MN Posts: 149	Re: center ac vent The center vent has 2 bolts that hold it in. They are screwed in from the back of the dash into threaded holes in the back of the vent itself. Remove the cardboard glove box to gain access. The right one can be removed with little difficulty, the left is more of a pain, but you can do it with an end wrench. The new vent just goes back in reverse order. Don't forget the foam gasket that goes around it when you install. It's a cheap fix, and the new chrome really improves the look of the dash as well. Good luck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.