|
07-01-2018, 10:50 PM
|
#1 |
|
Registered User
Join Date: Dec 2016
Location: South Australia
Posts: 40
|
wiring help needed
I am doing a 350 TPI swap into my 62 and have an Autometer elec speedo.
I also have a Dakota SGI-5-E interface unit. I am getting very confused about how to wire up the stock GM T700 VSS to the Speedo and how to connect the Interface to provide a 2000ppm signal to the stock 165 ECM. I have spent much time researching this but cannot find a schematic for this. Any help would be appreciated. Last edited by 1G1YY; 07-01-2018 at 10:57 PM. |
|
|
|
07-21-2018, 03:54 AM
|
#2 |
|
Registered User
Join Date: Dec 2016
Location: South Australia
Posts: 40
|
Re: wiring help needed
I would appreciate any assistance with this...
|
|
|
|
|
07-21-2018, 09:18 AM
|
#3 |
|
It's Better With Nitro
Join Date: Apr 2008
Location: Chino Hills, CA
Posts: 2,261
|
Re: wiring help needed
Try giving Dakota Digital technical support a call. They have been very helpful to me in the past. I know the time difference will be tough, but it may be well worth it.
__________________
1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
