IN Parting 72 GMC Sierra 350/350T.H. AC PS - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

48richard · 08-24-2011, 03:57 PM

I'm looking for an un-cut engine wiring harness
Thanks,
Richard

SPIRIT OF 76 CHEVY · 08-25-2011, 06:11 AM

How's the front bumper and grill pic plz
Posted via Mobile Device

**Dave** · 08-25-2011, 09:47 AM

Quote:

Originally Posted by 48richard

I'm looking for an un-cut engine wiring harness
Thanks,
Richard

The engine section looks ok, (I'll make certain). However, the TSC section for sure w/ heat sensor looks like it's been cut. I'll LYK.
Thax.
Dave..

**Dave** · 08-25-2011, 09:50 AM

Quote:

Originally Posted by SPIRIT OF 76 CHEVY

How's the front bumper and grill pic plz
Posted via Mobile Device

Front bumper is junk, brackets are good. Grille has 2 dents in it that could be fixed, NO rust thru areas. Fender eyebrows and headlight bezels are junk. I'll take pix of the grille.

**Dave** · 08-25-2011, 09:53 AM

Quote:

Originally Posted by wiggins

I am interested in the cut out dash as well. Can you do better on the AC brackets. Package deal?

Combining shipping should help. PM sent.

wiggins · 08-25-2011, 01:10 PM

I'll take em', thanks

Quote:

Originally Posted by Dave

Combining shipping should help. PM sent.

48richard · 08-25-2011, 05:22 PM

I don't need the TSC part, so no worries there.

Thanks,
Richard

**Dave** · 08-25-2011, 06:11 PM

Quote:

Originally Posted by wiggins

I'll take em', thanks

AC dash and brackets are sold to Wiggins, pending payment. PM sent.

**Dave** · 08-25-2011, 07:46 PM

Pic of pass, window and lower frame for Brock. PM sent.

**Dave** · 08-25-2011, 07:56 PM

Quote:

Originally Posted by 48richard

I'm looking for an un-cut engine wiring harness
Thanks,
Richard

Pix for 48richard of engine harness.
Looks like the yellow wire was cut and spliced for HEI, instead of a ring terminal. New ring terminal on yellow wire at starter. Tape is unwraveling. LMK, thanks.

**Dave** · 08-25-2011, 08:04 PM

Quote:

Originally Posted by SPIRIT OF 76 CHEVY

How's the front bumper and grill pic plz
Posted via Mobile Device

Pix for SPIRIT OF 76 CHEVY. Grille and upper bar

**Dave** · 08-25-2011, 08:09 PM

More pix of grille. I really don't want to ship the upper bar and grille. Picked up price is 80.00
LMK.

supercheyenne1972 · 08-25-2011, 09:22 PM

Interested in glove box door if not sold or received payment for. Thanks Ray

**Dave** · 08-25-2011, 09:31 PM

[QUOTE=supercheyenne1972;4865086]Interested in glove box door if not sold or received payment for. Thanks Ray[/QUO

Ray, woodgrain glovebox door has sold to to ricks71pu. Did you need anything else?

48richard · 08-25-2011, 10:41 PM

Dave,
How much for the harness shipped to 85048?

Richard

Joe Blaze · 08-26-2011, 12:08 AM

I got my GMC hood letters today, they cleaned up nice with a brillo pad, thanks...

**Dave** · 08-26-2011, 10:43 AM

Quote:

Originally Posted by 48richard

Dave,
How much for the harness shipped to 85048?

Richard

Richard, how's 22.00 shipped CONUS?
LMK, thanx.

48richard · 08-26-2011, 01:46 PM

OK - PM your payment info, please. PayPal OK?

Richard

**Dave** · 08-26-2011, 08:00 PM

Quote:

Originally Posted by 48richard

OK - PM your payment info, please. PayPal OK?

Richard

PM sent.

UP GRADE · 08-26-2011, 08:39 PM

Put me next in line for the grille. Pm sent.
Posted via Mobile Device

72cheyenneman · 08-26-2011, 08:53 PM

Would you be willing to sell the 2-sparkplug wire bracket loom only (next to last photo, top left hand)? I already have the rest, just need the bracket loom. Or is that the best you can do price wise with the whole group? By the way, do you have the tailpipe bracket hanger that's on the rear frame, driver's side, that bolts to the frame and holds the tailpipe in place?

Also, I'm interested in the exhaust manifolds--put me next in line. Thanks, Casey

**Dave** · 08-27-2011, 10:46 AM

Quote:

Originally Posted by 72cheyenneman

Would you be willing to sell the 2-sparkplug wire bracket loom only (next to last photo, top left hand)? I already have the rest, just need the bracket loom. Or is that the best you can do price wise with the whole group? By the way, do you have the tailpipe bracket hanger that's on the rear frame, driver's side, that bolts to the frame and holds the tailpipe in place?

Also, I'm interested in the exhaust manifolds--put me next in line. Thanks, Casey

Casey,
Thanks for the questions. Right now, I want to try keep everything together on the wire loom holders. I'll check on the tailpipe exhaust hanger for you.

john6596 · 08-27-2011, 08:27 PM

How are the rear side marker lights do they have the chorme around them

SPIRIT OF 76 CHEVY · 08-28-2011, 02:29 AM

What u take for the two eyebrows
Posted via Mobile Device

**Dave** · 08-28-2011, 12:29 PM

Quote:

Originally Posted by john6596

How are the rear side marker lights do they have the chorme around them

Rear side markers have the ss trim around them but are faded badly.

08-24-2011, 03:57 PM	#76
48richard Registered User Join Date: Oct 2009 Location: Phoenix, AZ Posts: 475	Re: Parting 72 GMC Sierra 350/350T.H. AC PS I'm looking for an un-cut engine wiring harness Thanks, Richard __________________ 1971 C10 Longbed, 350/TH350

08-25-2011, 06:11 AM	#77
SPIRIT OF 76 CHEVY Registered User Join Date: Mar 2009 Location: ATL, GA Posts: 722	Re: Parting 72 GMC Sierra 350/350T.H. AC PS How's the front bumper and grill pic plz Posted via Mobile Device __________________ Stan's short bed fleet 69 custom deluxe swb 69 custom swb shop truck 70 custom sport truck swb 72 GMC super custom swb 72 Custom/10 swb inline 6 auto p/s p/b 77 silverado swb 86 Buick Grand National 92 silverado sport swb 06 silverado crew cab 07 caddy sts 08 f250 4x4 crew cab Sold!!! 12 dodge ram 1500 big horn

08-25-2011, 05:22 PM	#82
48richard Registered User Join Date: Oct 2009 Location: Phoenix, AZ Posts: 475	Re: Parting 72 GMC Sierra 350/350T.H. AC PS I don't need the TSC part, so no worries there. Thanks, Richard __________________ 1971 C10 Longbed, 350/TH350

08-25-2011, 07:46 PM	#84
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,376	Re: Parting 72 GMC Sierra 350/350T.H. AC PS Pic of pass, window and lower frame for Brock. PM sent. Attached Images

08-25-2011, 08:09 PM	#87
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,376	Re: Parting 72 GMC Sierra 350/350T.H. AC PS More pix of grille. I really don't want to ship the upper bar and grille. Picked up price is 80.00 LMK. Attached Images

08-25-2011, 09:22 PM	#88
supercheyenne1972 Registered User Join Date: Feb 2009 Location: St. Charles Missouri Posts: 133	Re: Parting 72 GMC Sierra 350/350T.H. AC PS Interested in glove box door if not sold or received payment for. Thanks Ray

08-25-2011, 09:31 PM	#89
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,376	Re: Parting 72 GMC Sierra 350/350T.H. AC PS [QUOTE=supercheyenne1972;4865086]Interested in glove box door if not sold or received payment for. Thanks Ray[/QUO Ray, woodgrain glovebox door has sold to to ricks71pu. Did you need anything else?

08-25-2011, 10:41 PM	#90
48richard Registered User Join Date: Oct 2009 Location: Phoenix, AZ Posts: 475	Re: Parting 72 GMC Sierra 350/350T.H. AC PS Dave, How much for the harness shipped to 85048? Richard __________________ 1971 C10 Longbed, 350/TH350

08-26-2011, 12:08 AM	#91
Joe Blaze Registered User Join Date: Aug 2011 Location: Long Island, NY Posts: 154	Re: Parting 72 GMC Sierra 350/350T.H. AC PS I got my GMC hood letters today, they cleaned up nice with a brillo pad, thanks... Last edited by Joe Blaze; 08-27-2011 at 12:54 PM.

08-26-2011, 01:46 PM	#93
48richard Registered User Join Date: Oct 2009 Location: Phoenix, AZ Posts: 475	Re: Parting 72 GMC Sierra 350/350T.H. AC PS OK - PM your payment info, please. PayPal OK? Richard __________________ 1971 C10 Longbed, 350/TH350

08-26-2011, 08:39 PM	#95
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	Re: Parting 72 GMC Sierra 350/350T.H. AC PS Put me next in line for the grille. Pm sent. Posted via Mobile Device

08-26-2011, 08:53 PM	#96
72cheyenneman Registered User Join Date: Nov 2009 Location: New Orleans, Louisiana Posts: 610	Re: Parting 72 GMC Sierra 350/350T.H. AC PS Would you be willing to sell the 2-sparkplug wire bracket loom only (next to last photo, top left hand)? I already have the rest, just need the bracket loom. Or is that the best you can do price wise with the whole group? By the way, do you have the tailpipe bracket hanger that's on the rear frame, driver's side, that bolts to the frame and holds the tailpipe in place? Also, I'm interested in the exhaust manifolds--put me next in line. Thanks, Casey

08-27-2011, 08:27 PM	#98
john6596 Registered User Join Date: Mar 2011 Location: Ubly Michigan Posts: 21	Re: Parting 72 GMC Sierra 350/350T.H. AC PS How are the rear side marker lights do they have the chorme around them

08-28-2011, 02:29 AM	#99
SPIRIT OF 76 CHEVY Registered User Join Date: Mar 2009 Location: ATL, GA Posts: 722	Re: Parting 72 GMC Sierra 350/350T.H. AC PS What u take for the two eyebrows Posted via Mobile Device __________________ Stan's short bed fleet 69 custom deluxe swb 69 custom swb shop truck 70 custom sport truck swb 72 GMC super custom swb 72 Custom/10 swb inline 6 auto p/s p/b 77 silverado swb 86 Buick Grand National 92 silverado sport swb 06 silverado crew cab 07 caddy sts 08 f250 4x4 crew cab Sold!!! 12 dodge ram 1500 big horn



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.