KS 72 gmc 1/2 ton getting parted soon - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 10-20-2011, 04:40 PM

Sorry guys be back after dark to post prices, dang server being slow killed my time I had this afternoon. Thanks Randy

webfoot · 10-20-2011, 05:29 PM

Heater control looks good. Any of the levers broken?

I am interested in the LH door trim, the LH front fender piece, and both RH bed pieces. (afraid of the shipping!) Let me know if there are any problems with these pieces that may not show up in the photos.

HeavyMetalChevy · 10-20-2011, 06:57 PM

Quote:

Originally Posted by teeitup

4666666666

Hey is that you randy in the first pic??? "hello" noce to meet ya... Sorry for this but how much for the front bumper... Sorry.. .I had to take a stab... Peace dude

HeavyMetalChevy · 10-20-2011, 07:01 PM

Quote:

Originally Posted by Vintage Windmills

Randy, You have succeeded in a spooky pic for Halloween! Look at the ghost draped over the crashed truck in the last pic of post 1.

I'm interested in the Tach, Dash pad, and sun Visors. Pics and prices when you have a moment.

HEY I SEEIT!!!! BOO! lol ok no more jokes fill up page... SERIOUSLY interested in rear bumper randy... Give me a holler

dcasalena · 10-20-2011, 08:09 PM

reverse lenses looked cracked, so don't want.
taillight chrome and red lenses look good so still interested.
Also still interested in all 4 side markers if not cracked or crazed.
Thanks

teeitup · 10-20-2011, 09:08 PM

Wetowm, Rich, brackets will fit, bumper is nto bad shape,but it does have a couple scars on it see close up pics

Brian Atkinson, they are in good shape, see pics. They have some clips that go in door channel $32 shipped

Jondancer, driver side has a few dings. No clips for them. $22 shipped for pair

Webfoot, heater control arms are good but it is separated from rivets. $28 shipped for it. I forgot to check on cig lighter wire. As far as chrome, all driver quality, I do not sell individually. I'd sell all lower trim for $50 plus shipping, guessing shipping $20

dcasalena, side markers are not any good, broke or worn. Drivers side taillight lens does have a couple chips, $10 plus shipping for pair. Your 2nd on taillight trim $17 for them plus shipping. Outer door handles are pitted

Madnessbigblock, $20 shipped for it complete. No shipping windows, sorry. I forgot to get pics of belts, but will Fri

thelonerife, Chuck, it would be different than 68, sorry

Vintage, Jud, your too funny about the ghost

Dash pad has been recovered, not the best shape. The tach is not factory $25 for it. Visors are good $20 for them. Mirror is not bad shape $10 for it. Sorry no good windshields right now

LeeH, I ought to have that on some other boxes I have out already, I will look.

RJGeister, Rich, $32 shipped for pair, your 2nd on them

RusytGold, $20 plus shipping on visors, your 2nd on them. Sorry no shipping seat

Cannonball1, I'll have to check bat tray out. Throttle cable stays with gas pedal. Tranny kickdown cable $12 plus ship. Carb is a Holley $25 plus ship for it

HeavyMetalchevy, Duane, thats me nice Huh???

Your first on front bumper

2nd on rear bumper

Thanks Randy

**WETOWM** · 10-20-2011, 09:19 PM

What shape are the brackets in for rear bumper rusty ? What about the rear glass is it a soft ray glass ? If so is it nice ? Thanks rich ...

teeitup · 10-20-2011, 09:21 PM

Rich, I don't think they are real rusty, I'll try to get it off on Sat and check condition. Sorry I don't ship glass, for the back window picked up $20. Thanks Randy

Vintage Windmills · 10-20-2011, 09:30 PM

Ok Randy, I'll take the visors, tach and mirror. Did you have a chance to figure out the wheel specs on those aluminum rims on the other truck? Also shoot me a price for those when you can if you can avoid that ghost

. Thanks

teeitup · 10-20-2011, 09:33 PM

Jud, that stuff is yours, sorry I haven't had any time to pull wheels off other truck, dang sun sitting to early for me. I will get the size for you though. I was just wanting to get this thing listed so everyone could see

Thanks Randy

webfoot · 10-20-2011, 10:14 PM

I will take the heater control for $28 shipped, plus whatever you want for that wire assuming its there. I will pass on the lower trim.

code · 10-20-2011, 10:25 PM

Is the steering column still in good shape? If so how much shipped to 74604?

**DaHos** · 10-20-2011, 11:00 PM

All ft motor items; water pump pulley, crank pulley, alt brackets, ps pump and brackets. Also need gas pedal assembly with cable and Auto kick down cable and manifold bracket.

Tuff Gong · 10-21-2011, 12:01 AM

Brian Atkinson, they are in good shape, see pics. They have some clips that go in door channel $32 shipped

I want them, but I am going to pass at this time. Thank you for taking a moment to post the pics. Talk to you later. Brian

teeitup · 10-21-2011, 07:43 AM

RJGeister, Rich, your up on vent shades. Thanks Randy

teeitup · 10-21-2011, 07:48 AM

webfoot, let me look and make sure I have a wire, I will look at noon

code, I think its good shape but I need to check it out. Most need new upper and lower bearings. $40 plus shipping

DaHos, I think the water pump pulley is bent, $15 for lower pulllies, $20 for alt brackets, $40 for PS pump and brackets, gas pedal setup $25, I have a guy asking about the kickdown but I may have another one out there, all plus shipping

Brian, no problem

Thanks Randy

**DaHos** · 10-21-2011, 07:55 AM

Quote:

Originally Posted by teeitup

DaHos, I think the water pump pulley is bent, $15 for lower pulllies, $20 for alt brackets, $40 for PS pump and brackets, gas pedal setup $25, I have a guy asking about the kickdown but I may have another one out there, all plus shipping

Thanks Randy

All above items shipped to 48867, take a look for an extra water pump pulley and kick down with bracket. Also can you leave the lines on the pump.

Shoot me a total and a PP addy.

Cannonball1 · 10-21-2011, 09:02 AM

Randy, put me down for the trans cable and the carb. Let me know on the battery tray. PM me your PayPal info when you get a chance.

54belair · 10-21-2011, 11:51 AM

I would be interested in pricing on the dash itself (after everyone buys the controls)

Lee H · 10-21-2011, 11:56 AM

Quote:

Originally Posted by teeitup

LeeH, I ought to have that on some other boxes I have out already, I will look.

Thanks Randy

Randy, Great, PM me price and PP info and I'll send you the money. I'd like the screws and the cover. Thanks, Lee

jtj143 · 10-21-2011, 12:05 PM

Any chance the hood letters survived the crash?

REEDS 72 · 10-21-2011, 01:51 PM

Hi are the rear wheel tubs good can I see some pics of them shipping would be to 84003 thanks

kcsa75 · 10-21-2011, 02:10 PM

How much for the seat? I can pick it up?

Thanks.

vectorit · 10-21-2011, 03:02 PM

Is it a short water pump?
If so, I am interested in the PS pump brackets.
Clutch fan? Interested if there.

teeitup · 10-21-2011, 06:21 PM

I got some of it tore apart this evening, will try to get more Sat afternoon

DaHos, The PS brackets were cut but I have another set of those to trade out. Sorry no other water pump pullies, I'll include the one with the deal, you might be able to straighten it. I also have another detent cable with bracket

Cannonball1, cable and carb are yours

54belair, $70 plus shipping for whole dash

LeeH, I'll try to get pic of it Sat

jtj143, I'll look Sat

Reeds72, I'll look Sat

kcsa75, $40 for complete seat

vectorit, ps brackets have been cut. Sorry no clutch fan on this one

Thanks Randy

10-20-2011, 04:40 PM	#26
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 gmc 1/2 ton getting parted soon Sorry guys be back after dark to post prices, dang server being slow killed my time I had this afternoon. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-20-2011, 05:29 PM	#27
webfoot Registered User Join Date: Nov 2007 Location: Hermiston, OR Posts: 947	Re: 72 gmc 1/2 ton getting parted soon Heater control looks good. Any of the levers broken? I am interested in the LH door trim, the LH front fender piece, and both RH bed pieces. (afraid of the shipping!) Let me know if there are any problems with these pieces that may not show up in the photos. __________________ *Running in place gets you nowhere fast.* -me 1968 GTO 4-spd covnvertible 1970 K-20 4-speed, factory AC.

10-20-2011, 08:09 PM	#30
dcasalena Registered User Join Date: Jan 2011 Location: Acton, MA Posts: 220	Re: 72 gmc 1/2 ton getting parted soon reverse lenses looked cracked, so don't want. taillight chrome and red lenses look good so still interested. Also still interested in all 4 side markers if not cracked or crazed. Thanks

10-20-2011, 09:08 PM	#31
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 gmc 1/2 ton getting parted soon Wetowm, Rich, brackets will fit, bumper is nto bad shape,but it does have a couple scars on it see close up pics Brian Atkinson, they are in good shape, see pics. They have some clips that go in door channel $32 shipped Jondancer, driver side has a few dings. No clips for them. $22 shipped for pair Webfoot, heater control arms are good but it is separated from rivets. $28 shipped for it. I forgot to check on cig lighter wire. As far as chrome, all driver quality, I do not sell individually. I'd sell all lower trim for $50 plus shipping, guessing shipping $20 dcasalena, side markers are not any good, broke or worn. Drivers side taillight lens does have a couple chips, $10 plus shipping for pair. Your 2nd on taillight trim $17 for them plus shipping. Outer door handles are pitted Madnessbigblock, $20 shipped for it complete. No shipping windows, sorry. I forgot to get pics of belts, but will Fri thelonerife, Chuck, it would be different than 68, sorry Vintage, Jud, your too funny about the ghost Dash pad has been recovered, not the best shape. The tach is not factory $25 for it. Visors are good $20 for them. Mirror is not bad shape $10 for it. Sorry no good windshields right now LeeH, I ought to have that on some other boxes I have out already, I will look. RJGeister, Rich, $32 shipped for pair, your 2nd on them RusytGold, $20 plus shipping on visors, your 2nd on them. Sorry no shipping seat Cannonball1, I'll have to check bat tray out. Throttle cable stays with gas pedal. Tranny kickdown cable $12 plus ship. Carb is a Holley $25 plus ship for it HeavyMetalchevy, Duane, thats me nice Huh??? Your first on front bumper 2nd on rear bumper Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-20-2011, 09:19 PM	#32
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,097	Re: 72 gmc 1/2 ton getting parted soon What shape are the brackets in for rear bumper rusty ? What about the rear glass is it a soft ray glass ? If so is it nice ? Thanks rich ...

10-20-2011, 09:21 PM	#33
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 gmc 1/2 ton getting parted soon Rich, I don't think they are real rusty, I'll try to get it off on Sat and check condition. Sorry I don't ship glass, for the back window picked up $20. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-20-2011, 09:30 PM	#34
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 72 gmc 1/2 ton getting parted soon Ok Randy, I'll take the visors, tach and mirror. Did you have a chance to figure out the wheel specs on those aluminum rims on the other truck? Also shoot me a price for those when you can if you can avoid that ghost. Thanks __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

10-20-2011, 09:33 PM	#35
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 gmc 1/2 ton getting parted soon Jud, that stuff is yours, sorry I haven't had any time to pull wheels off other truck, dang sun sitting to early for me. I will get the size for you though. I was just wanting to get this thing listed so everyone could see Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-20-2011, 10:14 PM	#36
webfoot Registered User Join Date: Nov 2007 Location: Hermiston, OR Posts: 947	Re: 72 gmc 1/2 ton getting parted soon I will take the heater control for $28 shipped, plus whatever you want for that wire assuming its there. I will pass on the lower trim. __________________ *Running in place gets you nowhere fast.* -me 1968 GTO 4-spd covnvertible 1970 K-20 4-speed, factory AC.

10-20-2011, 10:25 PM	#37
code Registered User Join Date: Jul 2011 Location: Ponca City, Oklahoma Posts: 2	Re: 72 gmc 1/2 ton getting parted soon Is the steering column still in good shape? If so how much shipped to 74604?

10-20-2011, 11:00 PM	#38
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,854	Re: 72 gmc 1/2 ton getting parted soon All ft motor items; water pump pulley, crank pulley, alt brackets, ps pump and brackets. Also need gas pedal assembly with cable and Auto kick down cable and manifold bracket.

10-21-2011, 12:01 AM	#39
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	Re: 72 gmc 1/2 ton getting parted soon Brian Atkinson, they are in good shape, see pics. They have some clips that go in door channel $32 shipped I want them, but I am going to pass at this time. Thank you for taking a moment to post the pics. Talk to you later. Brian

10-21-2011, 07:43 AM	#40
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 gmc 1/2 ton getting parted soon RJGeister, Rich, your up on vent shades. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-21-2011, 07:48 AM	#41
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 gmc 1/2 ton getting parted soon webfoot, let me look and make sure I have a wire, I will look at noon code, I think its good shape but I need to check it out. Most need new upper and lower bearings. $40 plus shipping DaHos, I think the water pump pulley is bent, $15 for lower pulllies, $20 for alt brackets, $40 for PS pump and brackets, gas pedal setup $25, I have a guy asking about the kickdown but I may have another one out there, all plus shipping Brian, no problem Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-21-2011, 09:02 AM	#43
Cannonball1 Registered User Join Date: Sep 2011 Location: Clayton NC Posts: 21	Re: 72 gmc 1/2 ton getting parted soon Randy, put me down for the trans cable and the carb. Let me know on the battery tray. PM me your PayPal info when you get a chance.



Register or Log In To remove these advertisements.

10-21-2011, 11:51 AM	#44
54belair Registered User Join Date: Mar 2011 Location: bolivar, mo Posts: 839	Re: 72 gmc 1/2 ton getting parted soon I would be interested in pricing on the dash itself (after everyone buys the controls)

10-21-2011, 12:05 PM	#46
jtj143 Registered User Join Date: Jun 2010 Location: Dotsonville, Tennessee Posts: 194	Re: 72 gmc 1/2 ton getting parted soon Any chance the hood letters survived the crash? __________________ '65 GMC Suburban 4X4, '71 GMC 4X4 LWB - The Yellow Eyed Monster, '86 C10 Silverado - Oldest Daughter's Pickup, '88 S15 GMC Work Truck, '95 GMC SLE 4X4 - Second Daughter's Truck, '99 K1500 GMC Suburban Road Trip Machine, 2000 C2500 W/T Utility Bed Work Truck, '03 Silverado - Wife's Grocery Getter

10-21-2011, 01:51 PM	#47
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: 72 gmc 1/2 ton getting parted soon Hi are the rear wheel tubs good can I see some pics of them shipping would be to 84003 thanks

10-21-2011, 02:10 PM	#48
kcsa75 Registered User Join Date: Oct 2010 Location: Kansas City Posts: 3,590	Re: 72 gmc 1/2 ton getting parted soon How much for the seat? I can pick it up? Thanks. __________________ Willie Swamp Angel Truckers '72 C10 Highlander *People who blindly follow a GPS end up on television programs on The Weather Channel. Some survive, some don't.*

10-21-2011, 03:02 PM	#49
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: 72 gmc 1/2 ton getting parted soon Is it a short water pump? If so, I am interested in the PS pump brackets. Clutch fan? Interested if there. __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

10-21-2011, 06:21 PM	#50
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 gmc 1/2 ton getting parted soon I got some of it tore apart this evening, will try to get more Sat afternoon DaHos, The PS brackets were cut but I have another set of those to trade out. Sorry no other water pump pullies, I'll include the one with the deal, you might be able to straighten it. I also have another detent cable with bracket Cannonball1, cable and carb are yours 54belair, $70 plus shipping for whole dash LeeH, I'll try to get pic of it Sat jtj143, I'll look Sat Reeds72, I'll look Sat kcsa75, $40 for complete seat vectorit, ps brackets have been cut. Sorry no clutch fan on this one Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.