KS 72 1/2 2wd getting parted now - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TheSeeker · 08-07-2013, 05:19 PM

It looks like it is a manual steering truck? Is the steering box in good shape, or really worn? I would be interested it a good manual gearbox.

ls1nova71 · 08-07-2013, 05:40 PM

Hey Randy, I'm going to hold off on the chassis parts for right now. Found a whole truck that's closer and should have a 3.73 rear end. Think it might be easier to get it. Might still be interested in just the rear end out of this truck to make a roller frame, but if somebody wants it before I can get there, don't hold it on my behalf. Thanks!

teeitup · 08-07-2013, 08:31 PM

Jud, seat and bumper are yours, I'll get it parted out and get some pics of support for you, I'll try this weekend

TheSeeker, it had alot of play it seemed

Eric, no problem, just let me know on rearend

Chevyguy_72, I guess now I will be parting frame, I'll check those out when I get front clip off

IronAngel, Michael, odometer shows 64,000, I don't know if it works or not.

Thanks Randy

Red Tractors · 08-07-2013, 09:16 PM

Randy,

Don't know if you have them, but I'm looking for Quadrajet choke coil linkage, throttle cable stop bracket and the rear vacuum fitting off the manifold. Also looking for a stock 4bbl air cleaner.

Possibly an entire q-jet if it's in decent shape.

Let me know,

Aaron

teeitup · 08-07-2013, 09:33 PM

Aaron, I'll look, I have 2 guys interested in this motor complete, waiting to hear back from them. Thanks Randy

chevyguy_72 · 08-08-2013, 09:41 AM

Quote:

Originally Posted by teeitup

Chevyguy_72, I guess now I will be parting frame, I'll check those out when I get front clip off

Thanks Randy

Thanks
Just let me know

**Ironangel** · 08-08-2013, 10:50 AM

I'm on for the motor & tranny Randy...Let me know when your ready and I'll be there...Thanks

bluek5 · 08-08-2013, 10:53 AM

Randy, l have a question for you. Do you know if the 1/2 ton and 3/4 use the same transmission crossmember? I need one for a 72 3/4 2 WD TH 350 Thanks, Paul
Posted via Mobile Device

dfwright · 08-08-2013, 11:51 AM

What condition are the hubcaps in? Are they dented up badly?

teeitup · 08-08-2013, 01:14 PM

chevyguy_72, I'll get with you

Michael, Its yours, I'll try to get it out this weekend but it may be next week

Paul, yes they are the same, I have one out of a 72 3/4 ton out there

dfwright, they are aftermarket, $15 plus shipping for all four

Thanks Randy

dfwright · 08-08-2013, 02:45 PM

Randy, I didn't realize they were aftermarket. I'll pass on the hubcaps. Thanks for letting me know.

gdavis · 08-08-2013, 05:15 PM

How about the short collaspible steering shaft. that connects to the column is it for sale

**Ironangel** · 08-08-2013, 05:21 PM

Thanks Randy, looks like rain for a couple of days...No hurry

PM me at your convenience and I'll be there...I'm looking for the can (reservoir) off the power steering pump for a 72 350ci C-10...Got any laying around? My pumps good, just need the stud off the can...Thanks again Randy

**ScottH** · 08-08-2013, 06:21 PM

Randy, how much for the "Chevy" floormats?

scott

RCbowtie69 · 08-08-2013, 06:52 PM

Hey Randy,do you still have the gas pedal set up.If you do i'll take it.Does the cable come with it?Thanks Randy.

bluek5 · 08-08-2013, 08:45 PM

Randy,
Thank's for the quick response. I found a crossmember locally. If you are cutting up a 3/4 frame I do need a rear crossmember mine was cut to install a trailer hitch. If you have one could you get me a price shipped to 84043.
Thanks, Paul

teeitup · 08-08-2013, 10:14 PM

dfwright, no problem

gdavis, I have the stock one, $15 plus shipping

Michael, I'll look and see not sure on ps stuff

ScottH, I think they are good shape but I need to check them out

Randy, yes it comes with cable, it is yours

Paul, no problem on AT crossmember, sorry I already hauled the 3/4 frame to scrap

Thanks Randy

**70CHEVYBB** · 08-09-2013, 09:43 AM

I need the rear bump bracket set. How much for the 4 pc set.

RCbowtie69 · 08-09-2013, 11:07 AM

Hey Randy,mo of $37.00 will be on it's way.Thanks

russgoodman · 08-09-2013, 12:24 PM

Randy,

I will take v8 motor stands $27 shipped

And put me in line for the 4 piece rear bumper brackets if it is a coil spring truck

Russ

teeitup · 08-09-2013, 01:54 PM

70chevybb, sorry its a step bumper on it

Randy, I'll let you know when it gets here

Russ, V8 mounts are yours, sorry no rear bumper brackets

Thanks Randy

teeitup · 08-09-2013, 11:39 PM

Guys I'm going to try to start parting on this truck Sat if not some on Sun for sure, I have to mow the yard sometime this weekend and also get a cab and some other parts off a previous truck I parted for a member. I'll get some pics of parts once I get it parted. Thanks Randy

heidick70 · 08-10-2013, 08:52 AM

what would you want for the whole column and wheel together?

green72s · 08-10-2013, 12:48 PM

Randy,

When you take pictures, can you please get one of the grill bowtie emblem and let me know how much to 85284?

Thanks

teeitup · 08-10-2013, 05:51 PM

heidick70, I may have steering wheel sold already, I have a good column out of another truck for sale if interested?

green72s, I think it has a crack but I will get a pic

Thanks Randy

08-07-2013, 05:19 PM	#26
TheSeeker Registered User Join Date: Dec 2009 Location: Glendale, AZ Posts: 337	Re: 72 1/2 2wd getting parted now It looks like it is a manual steering truck? Is the steering box in good shape, or really worn? I would be interested it a good manual gearbox.

08-07-2013, 05:40 PM	#27
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: 72 1/2 2wd getting parted now Hey Randy, I'm going to hold off on the chassis parts for right now. Found a whole truck that's closer and should have a 3.73 rear end. Think it might be easier to get it. Might still be interested in just the rear end out of this truck to make a roller frame, but if somebody wants it before I can get there, don't hold it on my behalf. Thanks! __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

08-07-2013, 08:31 PM	#28
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 1/2 2wd getting parted now Jud, seat and bumper are yours, I'll get it parted out and get some pics of support for you, I'll try this weekend TheSeeker, it had alot of play it seemed Eric, no problem, just let me know on rearend Chevyguy_72, I guess now I will be parting frame, I'll check those out when I get front clip off IronAngel, Michael, odometer shows 64,000, I don't know if it works or not. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-07-2013, 09:16 PM	#29
Red Tractors Registered User Join Date: Oct 2012 Location: Northern OH Posts: 72	Re: 72 1/2 2wd getting parted now Randy, Don't know if you have them, but I'm looking for Quadrajet choke coil linkage, throttle cable stop bracket and the rear vacuum fitting off the manifold. Also looking for a stock 4bbl air cleaner. Possibly an entire q-jet if it's in decent shape. Let me know, Aaron __________________ I still have a few more stupid questions left to be asked. '72 C-10 LWB step side "Old Red" '71 C-10 Cheyenne "Blue"

08-07-2013, 09:33 PM	#30
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 1/2 2wd getting parted now Aaron, I'll look, I have 2 guys interested in this motor complete, waiting to hear back from them. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-08-2013, 10:50 AM	#32
Ironangel Senior Member Join Date: Feb 2010 Location: Falls City, Nebraska "100 Miles From Nowhere" Posts: 2,219	Re: 72 1/2 2wd getting parted now I'm on for the motor & tranny Randy...Let me know when your ready and I'll be there...Thanks __________________ Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American"

08-08-2013, 10:53 AM	#33
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: 72 1/2 2wd getting parted now Randy, l have a question for you. Do you know if the 1/2 ton and 3/4 use the same transmission crossmember? I need one for a 72 3/4 2 WD TH 350 Thanks, Paul Posted via Mobile Device

08-08-2013, 11:51 AM	#34
dfwright Registered User Join Date: Jan 2009 Location: San Antonio, Texas Posts: 1,374	Re: 72 1/2 2wd getting parted now What condition are the hubcaps in? Are they dented up badly? __________________ 1972 C10 LWB, 350/350 Deconstruction began 5/2009, mostly completed restoration, 5/2017

08-08-2013, 01:14 PM	#35
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 1/2 2wd getting parted now chevyguy_72, I'll get with you Michael, Its yours, I'll try to get it out this weekend but it may be next week Paul, yes they are the same, I have one out of a 72 3/4 ton out there dfwright, they are aftermarket, $15 plus shipping for all four Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-08-2013, 02:45 PM	#36
dfwright Registered User Join Date: Jan 2009 Location: San Antonio, Texas Posts: 1,374	Re: 72 1/2 2wd getting parted now Randy, I didn't realize they were aftermarket. I'll pass on the hubcaps. Thanks for letting me know. __________________ 1972 C10 LWB, 350/350 Deconstruction began 5/2009, mostly completed restoration, 5/2017

08-08-2013, 05:15 PM	#37
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: 72 1/2 2wd getting parted now How about the short collaspible steering shaft. that connects to the column is it for sale __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper

08-08-2013, 05:21 PM	#38
Ironangel Senior Member Join Date: Feb 2010 Location: Falls City, Nebraska "100 Miles From Nowhere" Posts: 2,219	Re: 72 1/2 2wd getting parted now Thanks Randy, looks like rain for a couple of days...No hurry PM me at your convenience and I'll be there...I'm looking for the can (reservoir) off the power steering pump for a 72 350ci C-10...Got any laying around? My pumps good, just need the stud off the can...Thanks again Randy __________________ Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American"

08-08-2013, 06:21 PM	#39
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,185	Re: 72 1/2 2wd getting parted now Randy, how much for the "Chevy" floormats? scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon 2008 Corvette convertible

08-08-2013, 06:52 PM	#40
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: 72 1/2 2wd getting parted now Hey Randy,do you still have the gas pedal set up.If you do i'll take it.Does the cable come with it?Thanks Randy. __________________ My Truck: 2.5 drop front, 4 & 5/8 in rear, 350cubic in. been bored .60 over, 700r4 (soon), 3 speed (on tree for now).rims & tires size,15x8 ralleys 5 on 5,P275/60R15. Members I have met: Pickupman, 1972 Super Cheyenne, Stepside,Chis Mc Bride. tsnow67,joel.e,

08-08-2013, 08:45 PM	#41
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: 72 1/2 2wd getting parted now Randy, Thank's for the quick response. I found a crossmember locally. If you are cutting up a 3/4 frame I do need a rear crossmember mine was cut to install a trailer hitch. If you have one could you get me a price shipped to 84043. Thanks, Paul



Register or Log In To remove these advertisements.

08-08-2013, 10:14 PM	#42
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 1/2 2wd getting parted now dfwright, no problem gdavis, I have the stock one, $15 plus shipping Michael, I'll look and see not sure on ps stuff ScottH, I think they are good shape but I need to check them out Randy, yes it comes with cable, it is yours Paul, no problem on AT crossmember, sorry I already hauled the 3/4 frame to scrap Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-09-2013, 09:43 AM	#43
70CHEVYBB Senior Member Join Date: Feb 2012 Location: chillicothe, illinois Posts: 688	Re: 72 1/2 2wd getting parted now I need the rear bump bracket set. How much for the 4 pc set.

08-09-2013, 11:07 AM	#44
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: 72 1/2 2wd getting parted now Hey Randy,mo of $37.00 will be on it's way.Thanks __________________ My Truck: 2.5 drop front, 4 & 5/8 in rear, 350cubic in. been bored .60 over, 700r4 (soon), 3 speed (on tree for now).rims & tires size,15x8 ralleys 5 on 5,P275/60R15. Members I have met: Pickupman, 1972 Super Cheyenne, Stepside,Chis Mc Bride. tsnow67,joel.e,

08-09-2013, 12:24 PM	#45
russgoodman Registered User Join Date: Oct 2012 Location: Cache, OK Posts: 458	Re: 72 1/2 2wd getting parted now Randy, I will take v8 motor stands $27 shipped And put me in line for the 4 piece rear bumper brackets if it is a coil spring truck Russ __________________ 1969 Chevy C10 SWB Fleet - Build thread > http://67-72chevytrucks.com/vboard/s...d.php?t=593554 2008 GMC Sierra Denali - 6.2L AWD - my daily 2011 Ford Flex Limited - Ecoboost AWD - wife's daily 1987 Buick Regal Turbo T - 63K miles - Strip/Street car 1965 Ford Mustang Coupe - 289, c4, 53K miles

08-09-2013, 01:54 PM	#46
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 1/2 2wd getting parted now 70chevybb, sorry its a step bumper on it Randy, I'll let you know when it gets here Russ, V8 mounts are yours, sorry no rear bumper brackets Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-09-2013, 11:39 PM	#47
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 1/2 2wd getting parted now Guys I'm going to try to start parting on this truck Sat if not some on Sun for sure, I have to mow the yard sometime this weekend and also get a cab and some other parts off a previous truck I parted for a member. I'll get some pics of parts once I get it parted. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-10-2013, 08:52 AM	#48
heidick70 Registered User Join Date: Dec 2009 Location: Fort Collins Co Posts: 126	Re: 72 1/2 2wd getting parted now what would you want for the whole column and wheel together?

08-10-2013, 12:48 PM	#49
green72s Registered User Join Date: Dec 2006 Location: Tempe, Arizona Posts: 100	Re: 72 1/2 2wd getting parted now Randy, When you take pictures, can you please get one of the grill bowtie emblem and let me know how much to 85284? Thanks

08-10-2013, 05:51 PM	#50
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 1/2 2wd getting parted now heidick70, I may have steering wheel sold already, I have a good column out of another truck for sale if interested? green72s, I think it has a crack but I will get a pic Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.