KS Parting a original 71 chevy C10 now - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72 blue · 03-03-2015, 01:03 PM

Looks good Randy, Let me know how much shipped to 35125 and Ill send you a paypal payment

teeitup · 03-03-2015, 01:50 PM

jjzepplin, sure will

Mike, when I get that far on it I will get pics

Chris, I'll get it off and pics, it should mount on your intake fine

Ed, its not any good sorry

Steve, I'll see if its any good and I will post pics of screws for heater control

Bryan, I will be in touch

Rick, I will get it all added up and send you a pm

Thanks Randy

EdSevered · 03-03-2015, 02:54 PM

Quote:

Originally Posted by teeitup

Ed, its not any good sorry

Thanks Randy

Randy,
Is that response in regards to the A/C unit?

Thanks! -Ed

snipescastle2 · 03-03-2015, 03:08 PM

Randy,
could you send me a few pictures of the front bed panel Mike dropped off for me today? specifically, the upper edges and lower edges where the panel bolts to the bed floor and the rolled edge behind the cab? I'm going to try and get out there Sunday to pick that up.
Thanks again!
Ben

snipescastle2 · 03-03-2015, 03:09 PM

Randy,
could you send me a few pictures of the front bed panel Mike dropped off for me today? specifically, the upper edges and lower edges where the panel bolts to the bed floor and the rolled edge behind the cab? I'm going to try and get out there Sunday to pick that up.
Thanks again!
Ben

teeitup · 03-03-2015, 03:55 PM

Ed, yes AC unit is not any good

Ben, I will get some pics after work

Thanks Randy

snipescastle2 · 03-03-2015, 04:07 PM

Thanks Randy!
Ben

teeitup · 03-03-2015, 04:48 PM

Ben, its real solid

teeitup · 03-03-2015, 04:50 PM

few more for Derotoreut, hard to get a good pic of dent

teeitup · 03-03-2015, 04:51 PM

door panels

teeitup · 03-03-2015, 04:52 PM

the other one

teeitup · 03-03-2015, 04:54 PM

mirror, little black in glass on driver side

teeitup · 03-03-2015, 04:59 PM

chrome, driver rear piece has a dent on end and pass front cup piece has dent. No extra holes in these. I'm sure they have some small dings too. I have this door piece that I will throw in the deal. No clips with these.

teeitup · 03-03-2015, 05:00 PM

59

teeitup · 03-03-2015, 05:01 PM

64

teeitup · 03-03-2015, 05:02 PM

Steve, these are the screws that the heater control uses

teeitup · 03-03-2015, 05:03 PM

Front fenders, rad support, hood, inner fenders are sold
Inner and outer grill is sold

snipescastle2 · 03-03-2015, 06:02 PM

Randy,
Thanks for the Pics! I'll let you know if I can make it out Sunday......
Thanks!
Ben

EdSevered · 03-03-2015, 06:22 PM

Quote:

Originally Posted by teeitup

Ed, yes AC unit is not any good

Thanks Randy

Ok, thanks Randy!

**68350** · 03-03-2015, 07:13 PM

Price on dash vents and mirror randy?

teeitup · 03-03-2015, 08:43 PM

Sounds good Ben

Thanks Ed

68350, defrost vents are $15, complete mirror is $15 plus shipping. I wouldn't want to ship them with door panels.

Thanks Randy

teeitup · 03-03-2015, 08:46 PM

Chris, no rust, paint worn off, cap is chipped underneath, alot of these are

**68350** · 03-03-2015, 09:02 PM

If the vents are unbroken I'll take door panels vents and mirror

teeitup · 03-03-2015, 09:08 PM

Let me get it all parted and make sure the vents are good before we settle up. Door panels and mirror and vents if good are yours, Thanks

**68350** · 03-03-2015, 09:12 PM

Sounds good!

03-03-2015, 01:03 PM	#51
72 blue Registered User Join Date: Apr 2014 Location: Pell City, AL Posts: 86	Re: Parting a original 71 chevy C10 now Looks good Randy, Let me know how much shipped to 35125 and Ill send you a paypal payment

03-03-2015, 01:50 PM	#52
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now jjzepplin, sure will Mike, when I get that far on it I will get pics Chris, I'll get it off and pics, it should mount on your intake fine Ed, its not any good sorry Steve, I'll see if its any good and I will post pics of screws for heater control Bryan, I will be in touch Rick, I will get it all added up and send you a pm Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-03-2015, 03:08 PM	#54
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: Parting a original 71 chevy C10 now Randy, could you send me a few pictures of the front bed panel Mike dropped off for me today? specifically, the upper edges and lower edges where the panel bolts to the bed floor and the rolled edge behind the cab? I'm going to try and get out there Sunday to pick that up. Thanks again! Ben Attached Images

03-03-2015, 03:09 PM	#55
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: Parting a original 71 chevy C10 now Randy, could you send me a few pictures of the front bed panel Mike dropped off for me today? specifically, the upper edges and lower edges where the panel bolts to the bed floor and the rolled edge behind the cab? I'm going to try and get out there Sunday to pick that up. Thanks again! Ben Attached Images

03-03-2015, 03:55 PM	#56
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now Ed, yes AC unit is not any good Ben, I will get some pics after work Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-03-2015, 04:07 PM	#57
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: Parting a original 71 chevy C10 now Thanks Randy! Ben

03-03-2015, 04:48 PM	#58
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now Ben, its real solid Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-03-2015, 04:50 PM	#59
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now few more for Derotoreut, hard to get a good pic of dent Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-03-2015, 04:51 PM	#60
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now door panels Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-03-2015, 04:52 PM	#61
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now the other one Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-03-2015, 04:54 PM	#62
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now mirror, little black in glass on driver side Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-03-2015, 04:59 PM	#63
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now chrome, driver rear piece has a dent on end and pass front cup piece has dent. No extra holes in these. I'm sure they have some small dings too. I have this door piece that I will throw in the deal. No clips with these. Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-03-2015, 05:00 PM	#64
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now 59 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-03-2015, 05:01 PM	#65
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now 64 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-03-2015, 05:02 PM	#66
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now Steve, these are the screws that the heater control uses Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

03-03-2015, 05:03 PM	#67
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now Front fenders, rad support, hood, inner fenders are sold Inner and outer grill is sold __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-03-2015, 06:02 PM	#68
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: Parting a original 71 chevy C10 now Randy, Thanks for the Pics! I'll let you know if I can make it out Sunday...... Thanks! Ben

03-03-2015, 07:13 PM	#70
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: Parting a original 71 chevy C10 now Price on dash vents and mirror randy? __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

03-03-2015, 08:43 PM	#71
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now Sounds good Ben Thanks Ed 68350, defrost vents are $15, complete mirror is $15 plus shipping. I wouldn't want to ship them with door panels. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-03-2015, 08:46 PM	#72
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now Chris, no rust, paint worn off, cap is chipped underneath, alot of these are Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-03-2015, 09:02 PM	#73
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: Parting a original 71 chevy C10 now If the vents are unbroken I'll take door panels vents and mirror __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

03-03-2015, 09:08 PM	#74
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a original 71 chevy C10 now Let me get it all parted and make sure the vents are good before we settle up. Door panels and mirror and vents if good are yours, Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-03-2015, 09:12 PM	#75
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: Parting a original 71 chevy C10 now Sounds good! __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

Register or Log In To remove these advertisements.