IN Misc. 1947-1953 Parts

[Todd68Chevy]

I have some parts that are for the 1947-1953 Chevy body style and may fit more or might fit only one or 2 years with in that body style. I do not know this body style very well. If you have any questions or want more pictures just let me know. All prices are plus shipping when needed. Hoods, rear fender and some other large items will not be shipped.

1. Hood- nice shape but the center trim is rusted SOLD
2. Hood- decent hood but has a hole in the front $50
3. Fender right rear- sandblasted and solid but dented BAD $30
4. Quad Gauge- working condition unknown $20
5. Grill bars- painted parts are good exept one is dented in the center, chrome part is poor and bent up $40 for all 3
6. Bumper filler panel- one end is in nice shape but the other is cut off $10
7. Hood Hinges - rusty $10 pair
8. Hood Hinges - sand blasted SOLD
9. Defrost Vents- $10
10. Windshield Center Strip - chrome w/ screws and rear $20
11. Bed to Running Board Filler Panel - $10 rougher one, $20 for better one
12. Shock Brackets $5 each
13. Pedal- clutch? $5
14. Parking Light housings W/ chrome trim $20 pair
15. Bumper Brackets $40 pair
16. Bracket that goes behind the running board to bed filler panel $20 pair
17. anything else you see, just ask

Thanks for looking. PLEASE post questions to the thread as per the board rules.

[Todd68Chevy]

More pictures.

[Todd68Chevy]

and a few more.

[cwii]

pm sent

[Todd68Chevy]

Originally Posted by cwii

pm sent

There are 3 running board brackets but I am not sure if they are from a 1/2 ton or a big truck. I think they are from a 1 1/2 ton truck. $10.00 each or $25 for all 3 plus shipping. They look solid but do have couple issues. I can get you some pictures. I can also get measurements if that will help decide if they will work on a 1/2 ton or whatever you have. Thanks

[cwii]

I have a 3/4t, are the bolt retainers solid? can you measure them? I will verify mine to make sure they fit.
Thanks,

[Todd68Chevy]

Originally Posted by cwii

I have a 3/4t, are the bolt retainers solid? can you measure them? I will verify mine to make sure they fit.
Thanks,

Here are some pictures. from tip to tip 1 is approx. 19 1/2" and 2 are approx. 20 1/2" If you need more just let me know.

[Todd68Chevy]

A few more.

[cwii]

I'll take'em, please pm the payment details, i prefer paypal if that is ok with you.
Thanks,
Chuck

[Todd68Chevy]

Originally Posted by cwii

I'll take'em, please pm the payment details, i prefer paypal if that is ok with you.
Thanks,
Chuck

Running board brackets are sold and sent out UPS. Thanks

[nikwho]

Any thoughts on shipping the rear fender to 86004? i have no idea what it would take to ship it to me.
Nik

[Todd68Chevy]

Originally Posted by nikwho

Any thoughts on shipping the rear fender to 86004? i have no idea what it would take to ship it to me.
Nik

I do not have access to Grayhound shipping and I would think UPS/ FedEx would be high. It is pretty rough (dents, ect.) even if it is not real rusty. I will see if I have a box or something I could use and get you an idea.

[Vince Salerno 43]

I am looking for 52 complete wiper arms and parts (everything that goes under the dash that has to do with the wipers)

[Todd68Chevy]

Originally Posted by Vince Salerno 43

I am looking for 52 complete wiper arms and parts (everything that goes under the dash that has to do with the wipers)

The only items for the wipers that I have at this time are 1 wiper arm and 1 wiper pivot (part that bolts into the cab) I can get better pictures but I am not sure how good the pivot part is. I will try to get pictures tonight. Thanks

[nikwho]

I think that I'll pass on the fender due to shipping difficulty. But, do you have a bed to running board filler panel for the passenger side? If so, I'd be interested in that and the parking light housings shipped to 86004.

Thanks,
Nik

[Todd68Chevy]

Originally Posted by Vince Salerno 43

I am looking for 52 complete wiper arms and parts (everything that goes under the dash that has to do with the wipers)

These are the only items that I have. The nut has poor chrome. If interested then they would be $8.00 shipped USPS to 48 states.

Originally Posted by nikwho

I think that I'll pass on the fender due to shipping difficulty. But, do you have a bed to running board filler panel for the passenger side? If so, I'd be interested in that and the parking light housings shipped to 86004.

Thanks,
Nik

Nik, This is the only passenger side panel I have. It is rough on the ends. Do you need the bracket on the back side of it?
Parking lights $20.00 pair
Filler panel $ just the added cost of shipping
Bracket behind the panel $10.00
Shipping $12.66 USPS Standard shipping (1 week?) or $16.85 USPS Priority Mail (3 day)

[Todd68Chevy]

more pictures

[Todd68Chevy]

one more

[50 Chevy LS3]

Do you have a salvageable seat?

[Todd68Chevy]

Originally Posted by 50 Chevy LS3

Do you have a salvageable seat?

Sorry but I do not.

Welcome to the board fellow Indiana resident.

[50 Chevy LS3]

Thanks, I'm a ways from needing a seat anyway, just saw how close you are so thought I'd check.
Thanks for the welcome, I've been on another chevy trucks forum, still am but, this one is much larger, with alot of good advice.

[Todd68Chevy]

Originally Posted by 50 Chevy LS3

Thanks, I'm a ways from needing a seat anyway, just saw how close you are so thought I'd check.
Thanks for the welcome, I've been on another chevy trucks forum, still am but, this one is much larger, with alot of good advice.

What part of Indiana are you in? There is a lot of knowledge here. Enjoy

[50 Chevy LS3]

I'm about 40 miles west of Indy, kinda out in the sticks.

[Andrew S]

Can I talk you into $20 shipped for the quad gauge? Zip code 98801.

Andrew

[Todd68Chevy]

Originally Posted by Andrew S

Can I talk you into $20 shipped for the quad gauge? Zip code 98801.

Andrew

Sorry, Andrew but since the shipping will be around $12.00, I will not accept your offer. Since I do not have any way to know if these work or not I will go $27.00 shipped and insured to you.