TX Parting out 1978 Silverado BIG10 1/2 ton LWB - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 09-01-2011, 07:57 PM

How bad is the bed floor? Looking for a section between & fore/aft of the wheel tubs?

gearheads78 · 09-01-2011, 10:30 PM

Quote:

Originally Posted by catfishtn

Any chance the rear bumper brackets are good? If so, are they the thick type?
3/8 - 1/2 inch, flat w/4 holes, two on each end?

Some lady hit me this morning and broke both of them without damaging the bumper!!

I live in Nashville, will you ship?

Thanks

Joe

Brackets are good PM sent

Quote:

Originally Posted by SCOTI

How bad is the bed floor? Looking for a section between & fore/aft of the wheel tubs?

Most of the floor is good except the back 4" or so. Come look at it.

SCOTI · 09-01-2011, 10:39 PM

Quote:

Originally Posted by gearheads78

Brackets are good PM sent

Most of the floor is good except the back 4" or so. Come look at it.

I'll give you a shout this weekend.

oldblue1968chevy · 09-03-2011, 11:24 PM

if you still have the distributor will you pull it apart and look at the numbers on the weights?

im looking for # 375 center weight and # 41 outside weights

pm me if u got em i dont check the squarebody forums very ofter

gearheads78 · 09-04-2011, 12:08 AM

Quote:

Originally Posted by oldblue1968chevy

if you still have the distributor will you pull it apart and look at the numbers on the weights?

im looking for # 375 center weight and # 41 outside weights

pm me if u got em i dont check the squarebody forums very ofter

I've got a few HEI's laying around. I will look and let you know.

oldblue1968chevy · 09-04-2011, 12:09 AM

thanks a million man! im on a wild goose chase so far

**Oldblue1968** · 09-07-2011, 10:41 PM

Steering wheel?
Posted via Mobile Device

oldblue1968chevy · 09-07-2011, 10:42 PM

what'd you come up with gearhaad?

gearheads78 · 09-07-2011, 11:48 PM

Quote:

Originally Posted by Oldblue1968

Steering wheel?
Posted via Mobile Device

It has a few dings in the wood but in pretty good shape over all. 50.00 shipped down to you if you want it.

Quote:

Originally Posted by oldblue1968chevy

what'd you come up with gearhaad?

Sorry I got so carried away finishing stripping and cutting up the truck I forgot to look. Give me a day or two to dig around the shed to see what I have.

oldblue1968chevy · 09-08-2011, 11:19 AM

I just need 41 (the outside weights) already found the 375

gearheads78 · 09-09-2011, 09:40 PM

Quote:

Originally Posted by oldblue1968chevy

I just need 41 (the outside weights) already found the 375

Sorry the three I had didn't have 41 on them

**michael bustamante** · 09-10-2011, 01:19 PM

What color are the pull straps on the doors and condition?

gearheads78 · 09-10-2011, 03:20 PM

Quote:

Originally Posted by michael bustamante

What color are the pull straps on the doors and condition?

they were both junk and tossed out

SCOTI · 09-12-2011, 12:59 AM

Got your voicemail earlier tonight but was over @ my GF's parents for a birthday celebration. I'll give you a shout Monday after work.

09-01-2011, 07:57 PM	#76
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,915	Re: Parting out 1978 Silverado BIG10 1/2 ton LWB How bad is the bed floor? Looking for a section between & fore/aft of the wheel tubs? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

09-03-2011, 11:24 PM	#79
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Parting out 1978 Silverado BIG10 1/2 ton LWB if you still have the distributor will you pull it apart and look at the numbers on the weights? im looking for # 375 center weight and # 41 outside weights pm me if u got em i dont check the squarebody forums very ofter __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

09-04-2011, 12:09 AM	#81
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Parting out 1978 Silverado BIG10 1/2 ton LWB thanks a million man! im on a wild goose chase so far __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

09-07-2011, 10:41 PM	#82
Oldblue1968 Registered User Join Date: May 2011 Location: Temple, Texas Posts: 30	Re: Parting out 1978 Silverado BIG10 1/2 ton LWB Steering wheel? Posted via Mobile Device

09-07-2011, 10:42 PM	#83
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Parting out 1978 Silverado BIG10 1/2 ton LWB what'd you come up with gearhaad? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

09-08-2011, 11:19 AM	#85
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Parting out 1978 Silverado BIG10 1/2 ton LWB I just need 41 (the outside weights) already found the 375 __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

09-10-2011, 01:19 PM	#87
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,819	Re: Parting out 1978 Silverado BIG10 1/2 ton LWB What color are the pull straps on the doors and condition? __________________ 1967custom

09-12-2011, 12:59 AM	#89
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,915	Re: Parting out 1978 Silverado BIG10 1/2 ton LWB Got your voicemail earlier tonight but was over @ my GF's parents for a birthday celebration. I'll give you a shout Monday after work. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.