The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board > 67-72 Chevrolet & GMC Pickups Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-06-2014, 07:42 PM   #1
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Owen's C10

So I picked up this beauty Saturday as project to work on with my son. It was sitting in the neighbours back yard for the last 10 or 15 years, maybe more....lol. It's pretty rough, but I've seen a lot worse, and since I only paid $100 if I start to feel like it needs too much work I can just push it aside...
Attached Images
     
mooseknuckles is offline   Reply With Quote
Old 07-06-2014, 07:42 PM   #2
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: Owen's C10

slammed!
Attached Images
  
mooseknuckles is offline   Reply With Quote
Old 07-06-2014, 07:43 PM   #3
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: Owen's C10

I'm not 100% sure of the year, the cab and front end lead me to believe it's a 68, and all of the red parts on it are from a GMC of roughly the same year. there's a 920 badge on the left fender...the chassis has 8 lug wheels and a strange rear end with a bolt in center section and a bolt on diff cover, the neighbour says he has the ownership somewhere...
Attached Images
  
mooseknuckles is offline   Reply With Quote
Old 07-06-2014, 07:46 PM   #4
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: Owen's C10

gutted the interior and ripped the box off, also cut all the springs out to keep me motivated...lol. floors, mounts, rockers, and cab corners are gone, but the rest is pretty decent, I'll know more when I pull the front clip off, but so far the windshield area, cowl, and firewall look good.
Attached Images
     
mooseknuckles is offline   Reply With Quote
Old 07-06-2014, 07:47 PM   #5
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: Owen's C10

the frame gets rusty from the axel back which also makes it a good candidate for a step notch and back half. I also want to make it into a short bed truck.
mooseknuckles is offline   Reply With Quote
Old 07-06-2014, 08:21 PM   #6
71swb4x4
Senior Member
 
71swb4x4's Avatar
 
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
Re: Owen's C10

If the blue front fender is original it's a 67. The cigarette lighter is a 67 only piece as well.
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.
71swb4x4 is offline   Reply With Quote
Old 07-06-2014, 08:52 PM   #7
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: Owen's C10

Quote:
Originally Posted by 71swb4x4 View Post
If the blue front fender is original it's a 67. The cigarette lighter is a 67 only piece as well.
67 because of not having the side marker light right?
mooseknuckles is offline   Reply With Quote
Old 07-06-2014, 09:24 PM   #8
71swb4x4
Senior Member
 
71swb4x4's Avatar
 
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
Re: Owen's C10

Quote:
Originally Posted by mooseknuckles View Post
67 because of not having the side marker light right?
Yes. And the small window cab is the biggest clue, 67 was the only 67-72 year when you could get the small window in the 1/2 ton - 1 ton series trucks .
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.
71swb4x4 is offline   Reply With Quote
Old 07-06-2014, 09:28 PM   #9
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: Owen's C10

so any idea on the goofy looking rear end? wtf is it?
mooseknuckles is offline   Reply With Quote
Old 07-07-2014, 12:18 AM   #10
NurseBen
Registered User
 
NurseBen's Avatar
 
Join Date: Aug 2013
Location: Bountiful, Utah
Posts: 238
Re: Owen's C10

Quote:
Originally Posted by mooseknuckles View Post
so any idea on the goofy looking rear end? wtf is it?
Looks like an Eaton HO52
NurseBen is offline   Reply With Quote
Old 07-07-2014, 08:36 AM   #11
67chevy1series
Registered User
 
67chevy1series's Avatar
 
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
Re: Owen's C10

The red parts are 68 gmc and as stated above the rest of the truck is 67, the ignition is 67 only the fire wall is a little different from 68-72 as well lots of little things are different on 67's compared to 68-72
67chevy1series is offline   Reply With Quote
Old 07-07-2014, 08:48 AM   #12
mcbassin
Still Learning
 
mcbassin's Avatar
 
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
Re: Owen's C10

Looks like a nice build. I'm in
mcbassin is offline   Reply With Quote
Old 07-08-2014, 05:50 PM   #13
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: Owen's C10

question: will my 86 stock control arms bolt up to the 67? that way I could use my old arms, spindles, and brakes, then I could put some normal wheels on it. well on the front anyway.
mooseknuckles is offline   Reply With Quote
Old 07-09-2014, 10:05 PM   #14
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: Owen's C10

I'm gonna pull the cab off this weekend so I can work on the frame, I got a notch ordered for it, and also the cab floor needs some work!....actually it needs a new floor. then I need to look for a rear end....
mooseknuckles is offline   Reply With Quote
Old 07-13-2014, 05:41 PM   #15
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: Owen's C10

So we got quite a lot done this weekend, I had some really good help....got the front end off....
Attached Images
  
mooseknuckles is offline   Reply With Quote
Old 07-13-2014, 05:44 PM   #16
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: Owen's C10

next went the cab, and the old 283...
Attached Images
    
mooseknuckles is offline   Reply With Quote
Old 07-13-2014, 05:48 PM   #17
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: Owen's C10

long bed to short bed conversion.
Attached Images
    
mooseknuckles is offline   Reply With Quote
Old 07-13-2014, 05:52 PM   #18
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: Owen's C10

welded back together..... I just welded the outside for now till I figure out what to do for the bodydrop...
Attached Images
   
mooseknuckles is offline   Reply With Quote
Old 07-13-2014, 05:59 PM   #19
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: Owen's C10

Owen workin hard cleaning up the crossmember.....cut the rear cab mounts, bed mounts, and old tranny member off, then cleaned the frame up a little with the grinder, and gave it a quick coat of paint. I'll probably get my bro to sand blast everything when we get finished with the frame...
Attached Images
    
mooseknuckles is offline   Reply With Quote
Old 07-13-2014, 06:05 PM   #20
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: Owen's C10

she's now a 67 c20 short bed! I also gave the cab a good degreasing and wash job.
Attached Images
   
mooseknuckles is offline   Reply With Quote
Old 07-13-2014, 06:19 PM   #21
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: Owen's C10

8 lug drum to 5 lug disc conversion....I used the old control arms and spindles off my c10 and swapped them to the 67...glad I saved that crap!...I was surprised at how easily it came apart after 40 some years....hopefully I can get some drop spindles and some rotors this week, and I can use the old calipers, then get the front wheels bolted up.
Attached Images
    
mooseknuckles is offline   Reply With Quote
Old 07-13-2014, 06:28 PM   #22
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: Owen's C10

found a 10 bolt rear end from a Camaro that my bro had lying around, actually the same rear end I got the posi and gears out of....according to my calculations the Camaro rear is roughly 3" narrower than the 12 bolt in the 69...that should make for a nice wide wheel! now just need new axles or have them re-drilled...
mooseknuckles is offline   Reply With Quote
Old 07-14-2014, 03:52 PM   #23
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: Owen's C10

what colour is 536?
Attached Images
   
mooseknuckles is offline   Reply With Quote
Old 07-15-2014, 10:24 PM   #24
mooseknuckles
Registered User
 
mooseknuckles's Avatar
 
Join Date: Sep 2009
Location: ottawa,canada
Posts: 4,550
Re: Owen's C10

got a sweet deal on a pair of rust free cali doors...I'll be picking them up this week!
mooseknuckles is offline   Reply With Quote
Old 07-15-2014, 11:42 PM   #25
Slammed66
Needs a Big Block
 
Slammed66's Avatar
 
Join Date: Oct 2003
Location: Red Deer , Alberta
Posts: 1,198
Re: Owen's C10

I'm in, your square body is rad, this will be even better!
__________________
1964 Short box
On dropmembers and billets
1962 Suburban family cruiser
1972 K10
Slammed66 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:13 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com