GA 1970 c10 parting out - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

atm70chevy · 12-06-2017, 11:02 PM

Do you have the brackets for the steering column?

Anthony

**heehawracing** · 12-07-2017, 10:00 AM

Quote:

Originally Posted by atm70chevy

Do you have the brackets for the steering column?

Anthony

sorry sold

Acp13 · 12-11-2017, 05:47 PM

Driver side front fender?

Blk02ss · 12-28-2017, 01:56 AM

Following

Drewbee · 12-28-2017, 09:51 AM

Could you show me a picture of both sides of the rear spring mounts on the frame? I may be interested in buying them.

**painterljp** · 12-28-2017, 10:42 AM

Spare tire mount the one in the bed?

wmurdock72 · 12-30-2017, 06:03 AM

I am interested in the heater core brackets if it is non AC...also the screws for the blower motor and the screws/bolts that attach the heater box under dash and on the firewall...Let me know price and availability. Thanks

greywurm · 01-10-2018, 10:23 AM

I need this style carrier bearing mount for a manual drive shaft. Do you still have it?

**heehawracing** · 01-10-2018, 10:30 AM

Quote:

Originally Posted by greywurm

I need this style carrier bearing mount for a manual drive shaft. Do you still have it?

nothing left on this truck gut i will look to see if i have one like that

69BUCKET · 01-15-2018, 11:58 AM

Looking for rear taillight harness, lighter and it's bezel, heater controls...

tallbob · 12-11-2018, 08:48 PM

I am looking for a patch panel for the rear of my bed floor by the tailgate.
Thanks much, Bob

panhead59 · 12-12-2018, 11:11 AM

Sorry i just trashed a whole bed floor when nobody wanted it for free ! Had plenty of good large patches. Bad timing i guess.

tallbob · 01-03-2019, 10:47 PM

Still looking for a bed floor patch panel left rear drivers side at end of floor by tailgate. Thanks

bulldawg2 · 01-20-2019, 04:21 AM

Was it a factory a/c truck? I am looking for a dash

**heehawracing** · 01-20-2019, 10:02 AM

Quote:

Originally Posted by bulldawg2

Was it a factory a/c truck? I am looking for a dash

this truck is gone but i have a dash call me 7704687776

Tripmiester · 01-20-2019, 10:07 AM

Any tailgates Sir?

Thank
Trip

Tripmiester · 01-20-2019, 10:16 AM

Any tailgates Sir?

Thank
Trip

12-06-2017, 11:02 PM	#51
atm70chevy Registered User Join Date: Feb 2013 Location: Longview, Texas Posts: 173	Re: 1970 c10 parting out Do you have the brackets for the steering column? Anthony

12-11-2017, 05:47 PM	#53
Acp13 Registered User Join Date: Dec 2017 Location: Savannah, Georgia Posts: 6	Re: 1970 c10 parting out Driver side front fender?

12-28-2017, 01:56 AM	#54
Blk02ss Registered User Join Date: Dec 2017 Location: Prattville, Alabama Posts: 4	Re: 1970 c10 parting out Following

12-28-2017, 09:51 AM	#55
Drewbee Registered User Join Date: Dec 2011 Location: Villa Rica, GA Posts: 330	Re: 1970 c10 parting out Could you show me a picture of both sides of the rear spring mounts on the frame? I may be interested in buying them.

12-28-2017, 10:42 AM	#56
painterljp Senior Member Join Date: Nov 2014 Location: Albuquerque NM Posts: 903	Re: 1970 c10 parting out Spare tire mount the one in the bed?

12-30-2017, 06:03 AM	#57
wmurdock72 Registered User Join Date: Jul 2016 Location: Maize, Ks Posts: 17	Re: 1970 c10 parting out I am interested in the heater core brackets if it is non AC...also the screws for the blower motor and the screws/bolts that attach the heater box under dash and on the firewall...Let me know price and availability. Thanks __________________ 1972 k10 396 8" suspension lift 3" body lift - build in progress

01-10-2018, 10:23 AM	#58
greywurm Registered User Join Date: Jun 2014 Location: Temecula Posts: 227	Re: 1970 c10 parting out I need this style carrier bearing mount for a manual drive shaft. Do you still have it? Attached Images __________________ 71 Long bed C10 w/68 front clip, 350 SBC+HEI, TH350 06 Yukon XL Denali - Stock

01-15-2018, 11:58 AM	#60
69BUCKET Registered User Join Date: Oct 2017 Location: Newton Posts: 216	Re: 1970 c10 parting out Looking for rear taillight harness, lighter and it's bezel, heater controls...

12-11-2018, 08:48 PM	#61
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: 1970 c10 parting out I am looking for a patch panel for the rear of my bed floor by the tailgate. Thanks much, Bob

12-12-2018, 11:11 AM	#62
panhead59 Registered User Join Date: Feb 2012 Location: Vinton, Va. Posts: 473	Re: 1970 c10 parting out Sorry i just trashed a whole bed floor when nobody wanted it for free ! Had plenty of good large patches. Bad timing i guess. __________________ "You are not forgotten" USMC 75-79 (Aviation Ordnance Tech- F-4 Phantom) 1959 H-D Panhead. Owned since 1978. Currently with son in Lawton, OK. 1968 Chevy Custom SWB pick up. Fleetside. Lowered 4/6. Totally refurbished. 1966 Pontiac GTO. 4 speed. Saved original 389. Now has slightly built 455 engine. 355 rear gears. Very fun to drive !

01-03-2019, 10:47 PM	#63
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: 1970 c10 parting out Still looking for a bed floor patch panel left rear drivers side at end of floor by tailgate. Thanks

01-20-2019, 04:21 AM	#64
bulldawg2 Registered User Join Date: Nov 2012 Location: Powder Springs GA Posts: 15	Re: 1970 c10 parting out Was it a factory a/c truck? I am looking for a dash

01-20-2019, 10:07 AM	#66
Tripmiester Registered User Join Date: Jul 2018 Location: Bethany Connecticut Posts: 360	Re: 1970 c10 parting out Any tailgates Sir? Thank Trip

01-20-2019, 10:16 AM	#67
Tripmiester Registered User Join Date: Jul 2018 Location: Bethany Connecticut Posts: 360	Re: 1970 c10 parting out Any tailgates Sir? Thank Trip

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.