PA Extra Parts from Project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

7071lwb · 10-09-2016, 10:20 PM

I have some extra parts I'd like to sell that I've accumulated.
Cab dolly. SOLD
Set of 4 wheels and tires. 6x5.5 bolt pattern, 15" diameter. Tires are not road worthy in my opinion but they do hold air. All wheels are in similar condition. $50
New, unused 67-72 inner cowl patch panel. $150
1 radiator support. Sold
One passenger side front fender. SOLD
Passenger side door. Needs the bottom patched. $25
S10 blazer bucket seats.$40
Black lap belts. SOLD
Stock D44 steering arm off a 1972 K20. This should also fit a K10. $25
Stock front springs off a 1972 K20. SOLD
Rear drum brakes from Eaton HO52. One shoe is cracked, everything else looks good. Pulled for a disc brake swap. Most of the hardware has been sold leaving the backing plates, dust covers, and drums. $50
quadrajet carb. Was running when I pulled it to swap in a holley. $75
Headers for a 350 off a C10. $25
Short sm465 adapter and coupling from a 67 k series truck. Small crack in adapter. Coupling is in good condition. $25
Driveshaft for a shortbed C10 with a TH400. Sold
Drivers side inner fender. SOLD

Pictures for most of this will be in the link below.
I also have some miscellaneous small parts so ask if you need it. All sheet metal is for 69-72 trucks.

Also looking to sell my C10 air ride project either whole or in pieces.http://67-72chevytrucks.com/vboard/s...d.php?t=770522
Part out prices:
cab: SOLD
Original doors that need minimal work. SOLD
Bare frame: $450
front 5 lug suspension, including the front crossmember, spindles, brakes, control arms, etc. I cleaned and painted most of these parts. $300
Rear tubular trailing arms from POL. SOLD
6 lug rear axle with 3.73 rear gears. SOLD
69-72 hood: $125
Outer cowl. $50

I also have a NoLimit panhard bar and rear shock relocator kit with the shocks. SOLD

If you need pictures of specific spots on items let me know and I will get them. I want to get rid of all of this stuff and focus on another project so its no longer worth paying for storage of these items to me. I would much rather sell this stuff on here, I'm at the point where I would rather scrap things than continue to deal with Craigslist

7071lwb · 10-30-2016, 09:29 PM

Fenders and radiator support are now removed from the truck. Open to any reasonable offer since I need to make room.

7071lwb · 11-27-2016, 05:43 PM

Still have everything available. Would really like to get rid of some of this before it starts snowing.

7071lwb · 02-19-2017, 11:54 AM

Ttt

jaros44sr · 02-20-2017, 09:14 AM

Quote:

Originally Posted by 7071lwb

Still have everything available. Would really like to get rid of some of this before it starts snowing.

interested in fenders, will pm for info

88Ironduke · 02-21-2017, 11:59 AM

I'm out of the area but I'm interested in the seats. Do you hang any pictures of the passenger seat?

7071lwb · 02-24-2017, 10:48 PM

I will post some pictures for you tomorrow.

jlampka · 02-28-2017, 08:53 PM

How much for the drivers side fender shipped to 14120? Thanks

7071lwb · 09-22-2018, 05:22 PM

Recently updated.

HIGHWAY BY THE SEA · 09-22-2018, 08:25 PM

Pictures of the lap belts?

7071lwb · 09-22-2018, 10:57 PM

Quote:

Originally Posted by HIGHWAY BY THE SEA

Pictures of the lap belts?

I thought I had some on my phone but cannot find them. I will get some tomorrow morning.

kv63 · 09-23-2018, 12:07 AM

I am interested in the quadrajet carb? Can you provide the numbers on it?

**jaybatta** · 09-23-2018, 10:28 AM

2nd in line on the seat belts
Thanks

Joe

7071lwb · 09-23-2018, 12:02 PM

Quadrajet.
top line of numbers appear to be 17080224
botton line is 0710 CZZ

7071lwb · 09-23-2018, 12:03 PM

Seat Belts

kv63 · 09-24-2018, 03:02 AM

Thank you for the numbers. I’ll have to pass on it because I am looking for one manufactured in 1972.

HIGHWAY BY THE SEA · 09-24-2018, 08:44 AM

I will take the seatbelts pictured. PM sent.

K5 MAX · 09-24-2018, 10:33 AM

Wish you were closer, i need a radiator support

7071lwb · 09-24-2018, 07:46 PM

Belts are sold to Highway by the Sea.

**jaybatta** · 09-24-2018, 07:50 PM

Oh..well I guess I'm out then

7071lwb · 09-27-2018, 06:30 PM

ttt

HIGHWAY BY THE SEA · 09-27-2018, 07:07 PM

Seat belts arrived today. LOVE them!!

**biketopia** · 09-28-2018, 08:24 AM

What condition is the pass. fender in? rust, corrosion from the battery, dents, etc? Might be interested in that and the cab dolly.

**biketopia** · 09-28-2018, 08:29 AM

And possibly one of the inner fenders, cant remember which one I need though.

7071lwb · 09-30-2018, 07:17 PM

Quote:

Originally Posted by HIGHWAY BY THE SEA

Seat belts arrived today. LOVE them!!

Glad I could help.

10-09-2016, 10:20 PM	#1
7071lwb Registered User Join Date: Nov 2015 Location: Bucks, PA Posts: 100	Extra Parts from Project I have some extra parts I'd like to sell that I've accumulated. Cab dolly. SOLD Set of 4 wheels and tires. 6x5.5 bolt pattern, 15" diameter. Tires are not road worthy in my opinion but they do hold air. All wheels are in similar condition. $50 New, unused 67-72 inner cowl patch panel. $150 1 radiator support. Sold One passenger side front fender. SOLD Passenger side door. Needs the bottom patched. $25 S10 blazer bucket seats.$40 Black lap belts. SOLD Stock D44 steering arm off a 1972 K20. This should also fit a K10. $25 Stock front springs off a 1972 K20. SOLD Rear drum brakes from Eaton HO52. One shoe is cracked, everything else looks good. Pulled for a disc brake swap. Most of the hardware has been sold leaving the backing plates, dust covers, and drums. $50 quadrajet carb. Was running when I pulled it to swap in a holley. $75 Headers for a 350 off a C10. $25 Short sm465 adapter and coupling from a 67 k series truck. Small crack in adapter. Coupling is in good condition. $25 Driveshaft for a shortbed C10 with a TH400. Sold Drivers side inner fender. SOLD Pictures for most of this will be in the link below. I also have some miscellaneous small parts so ask if you need it. All sheet metal is for 69-72 trucks. Also looking to sell my C10 air ride project either whole or in pieces.http://67-72chevytrucks.com/vboard/s...d.php?t=770522 Part out prices: cab: SOLD Original doors that need minimal work. SOLD Bare frame: $450 front 5 lug suspension, including the front crossmember, spindles, brakes, control arms, etc. I cleaned and painted most of these parts. $300 Rear tubular trailing arms from POL. SOLD 6 lug rear axle with 3.73 rear gears. SOLD 69-72 hood: $125 Outer cowl. $50 I also have a NoLimit panhard bar and rear shock relocator kit with the shocks. SOLD If you need pictures of specific spots on items let me know and I will get them. I want to get rid of all of this stuff and focus on another project so its no longer worth paying for storage of these items to me. I would much rather sell this stuff on here, I'm at the point where I would rather scrap things than continue to deal with Craigslist __________________ Daily Driver: 1972 K20 Project: 1967 Buick GS 340 Last edited by 7071lwb; 02-03-2019 at 07:40 PM. Reason: Update

10-30-2016, 09:29 PM	#2
7071lwb Registered User Join Date: Nov 2015 Location: Bucks, PA Posts: 100	Re: Extra Parts from Project Fenders and radiator support are now removed from the truck. Open to any reasonable offer since I need to make room. __________________ Daily Driver: 1972 K20 Project: 1967 Buick GS 340

11-27-2016, 05:43 PM	#3
7071lwb Registered User Join Date: Nov 2015 Location: Bucks, PA Posts: 100	Re: Extra Parts from Project Still have everything available. Would really like to get rid of some of this before it starts snowing. __________________ Daily Driver: 1972 K20 Project: 1967 Buick GS 340

02-19-2017, 11:54 AM	#4
7071lwb Registered User Join Date: Nov 2015 Location: Bucks, PA Posts: 100	Re: Extra Parts from Project Ttt __________________ Daily Driver: 1972 K20 Project: 1967 Buick GS 340

02-21-2017, 11:59 AM	#6
88Ironduke Registered User Join Date: Jul 2010 Location: Willingboro, NJ Posts: 489	Re: Extra Parts from Project I'm out of the area but I'm interested in the seats. Do you hang any pictures of the passenger seat? __________________ Retired USAF - No rockets, no mortars, no bad guys shooting...No stress!!! My Build Thread: Project 72' Green http://67-72chevytrucks.com/vboard/s...d.php?t=587932

02-24-2017, 10:48 PM	#7
7071lwb Registered User Join Date: Nov 2015 Location: Bucks, PA Posts: 100	Re: Extra Parts from Project I will post some pictures for you tomorrow. __________________ Daily Driver: 1972 K20 Project: 1967 Buick GS 340

02-28-2017, 08:53 PM	#8
jlampka Registered User Join Date: Sep 2013 Location: North Tonawanda, NY Posts: 236	Re: Extra Parts from Project How much for the drivers side fender shipped to 14120? Thanks

09-22-2018, 05:22 PM	#9
7071lwb Registered User Join Date: Nov 2015 Location: Bucks, PA Posts: 100	Re: Extra Parts from Project Recently updated. __________________ Daily Driver: 1972 K20 Project: 1967 Buick GS 340

09-22-2018, 08:25 PM	#10
HIGHWAY BY THE SEA Registered User Join Date: Nov 2012 Location: BY THE CAROLINA SEA Posts: 917	Re: Extra Parts from Project Pictures of the lap belts? __________________ FRANKENTRUCK 1981 Chevrolet C10 Shortbed Stepside GRANDTRUCK 1968 Chevrolet C10 Stepside Longbed http://67-72chevytrucks.com/vboard/s...d.php?t=584617 PROJECT JIGSAW 1967 GMC C3500 GREAT WHITE 1986 Blazer M1009

09-23-2018, 12:07 AM	#12
kv63 Registered User Join Date: Nov 2017 Location: Lakewood, Ca Posts: 143	Re: Extra Parts from Project I am interested in the quadrajet carb? Can you provide the numbers on it?

09-23-2018, 10:28 AM	#13
jaybatta Senior Member Join Date: Apr 2014 Location: Livingston, MT Posts: 834	Re: Extra Parts from Project 2nd in line on the seat belts Thanks Joe __________________ Joe 1968 K20 1970 K20 Semper Fi

09-23-2018, 12:02 PM	#14
7071lwb Registered User Join Date: Nov 2015 Location: Bucks, PA Posts: 100	Re: Extra Parts from Project Quadrajet. top line of numbers appear to be 17080224 botton line is 0710 CZZ Attached Images __________________ Daily Driver: 1972 K20 Project: 1967 Buick GS 340

09-23-2018, 12:03 PM	#15
7071lwb Registered User Join Date: Nov 2015 Location: Bucks, PA Posts: 100	Re: Extra Parts from Project Seat Belts Attached Images __________________ Daily Driver: 1972 K20 Project: 1967 Buick GS 340

09-24-2018, 03:02 AM	#16
kv63 Registered User Join Date: Nov 2017 Location: Lakewood, Ca Posts: 143	Re: Extra Parts from Project Thank you for the numbers. I’ll have to pass on it because I am looking for one manufactured in 1972.

09-24-2018, 08:44 AM	#17
HIGHWAY BY THE SEA Registered User Join Date: Nov 2012 Location: BY THE CAROLINA SEA Posts: 917	Re: Extra Parts from Project I will take the seatbelts pictured. PM sent. __________________ FRANKENTRUCK 1981 Chevrolet C10 Shortbed Stepside GRANDTRUCK 1968 Chevrolet C10 Stepside Longbed http://67-72chevytrucks.com/vboard/s...d.php?t=584617 PROJECT JIGSAW 1967 GMC C3500 GREAT WHITE 1986 Blazer M1009



Register or Log In To remove these advertisements.

09-24-2018, 10:33 AM	#18
K5 MAX Registered User Join Date: Jan 2017 Location: Panama City, FL Posts: 120	Re: Extra Parts from Project Wish you were closer, i need a radiator support __________________ 1972 K5 Blazer 350/350/PS/PB From GA but live in Panama City, FL

09-24-2018, 07:46 PM	#19
7071lwb Registered User Join Date: Nov 2015 Location: Bucks, PA Posts: 100	Re: Extra Parts from Project Belts are sold to Highway by the Sea. __________________ Daily Driver: 1972 K20 Project: 1967 Buick GS 340

09-24-2018, 07:50 PM	#20
jaybatta Senior Member Join Date: Apr 2014 Location: Livingston, MT Posts: 834	Re: Extra Parts from Project Oh..well I guess I'm out then __________________ Joe 1968 K20 1970 K20 Semper Fi

09-27-2018, 06:30 PM	#21
7071lwb Registered User Join Date: Nov 2015 Location: Bucks, PA Posts: 100	Re: Extra Parts from Project ttt __________________ Daily Driver: 1972 K20 Project: 1967 Buick GS 340

09-27-2018, 07:07 PM	#22
HIGHWAY BY THE SEA Registered User Join Date: Nov 2012 Location: BY THE CAROLINA SEA Posts: 917	Re: Extra Parts from Project Seat belts arrived today. LOVE them!! __________________ FRANKENTRUCK 1981 Chevrolet C10 Shortbed Stepside GRANDTRUCK 1968 Chevrolet C10 Stepside Longbed http://67-72chevytrucks.com/vboard/s...d.php?t=584617 PROJECT JIGSAW 1967 GMC C3500 GREAT WHITE 1986 Blazer M1009

09-28-2018, 08:24 AM	#23
biketopia Senior Member Join Date: Jul 2015 Location: Warrenton VA Posts: 1,008	Re: Extra Parts from Project What condition is the pass. fender in? rust, corrosion from the battery, dents, etc? Might be interested in that and the cab dolly. __________________ 71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350

09-28-2018, 08:29 AM	#24
biketopia Senior Member Join Date: Jul 2015 Location: Warrenton VA Posts: 1,008	Re: Extra Parts from Project And possibly one of the inner fenders, cant remember which one I need though. __________________ 71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350

Register or Log In To remove these advertisements.