|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-14-2002, 12:42 AM
|
#1 |
|
Account Suspended
Join Date: Nov 2001
Location: JONESVILL NC
Posts: 1,303
|
What HP Is 462 Camel Hump Heads Rated
i got a set of 462 casting number heads and they are camel hump heads and wanted to know are they 300 or 350 or 375 HP rated
------------------ "FOUNDER OF 47-72 BOWTIE CLUB OF THE CAROLINAS" Yes my name is Tony AKAbig71 has a 1971 WITH 25 OPTIOS AND BIG 402 I live in jonesville NC www.parduescustombodyshop.freeservers.com JPARDUE1@TRIAD.RR.COM www.47-72BowTieClubOfTheCarolinas.com God Bless America |
|
|
|
04-14-2002, 09:05 AM
|
#2 |
|
Car Knocker
Join Date: May 2001
Location: jefferson,arkansas
Posts: 664
|
I was always told that if a straight plug-300 If angle plug-350. If angle plug and 2.02 intake-375. I might be wrong, I sure someone will straighten me out.
__________________
68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit. |
|
|
|
|
04-14-2002, 09:13 AM
|
#3 |
|
Registered User
Join Date: Feb 2000
Location: Vassar,Ks 66543
Posts: 375
|
according to the "Chevrolet by the Numbers" book, #462 with 1.94/1.50 valves were rated anywhere from 250,275,300 HP and with 2.02/1.60 valves were rated at 350,365,375 HP. these heads have 62.076 chambers, and were used in 1965 and early 1966 production. hope this helps!!
__________________
'72 C-10 Cheyenne Super, 402/TH400, Bucket Seats, tilt, tach, AM/FM & shoulder harnesses and a ground up restoration |
|
|
|
|
04-14-2002, 11:06 AM
|
#4 |
|
Registered User
Join Date: Aug 2001
Location: Long Beach, Ca
Posts: 1,432
|
check em good, there known to crack around the seats
------------------ 71 basic C-10 350. The only option is the rust.No nothing on it, but thats all about to change. <A HREF="http://www.geocities.com/stevemau/slam33page.html?1004806705410 " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>
__________________
71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A> |
|
|
|
|
04-14-2002, 01:17 PM
|
#5 |
|
Account Suspended
Join Date: Nov 2001
Location: JONESVILL NC
Posts: 1,303
|
they got 202 valves and straght plugs
------------------ "FOUNDER OF 47-72 BOWTIE CLUB OF THE CAROLINAS" Yes my name is Tony AKAbig71 has a 1971 WITH 25 OPTIOS AND BIG 402 I live in jonesville NC www.parduescustombodyshop.freeservers.com JPARDUE1@TRIAD.RR.COM www.47-72BowTieClubOfTheCarolinas.com God Bless America |
|
|
|
|
04-14-2002, 08:03 PM
|
#6 |
|
Account Suspended
Join Date: Nov 2001
Location: JONESVILL NC
Posts: 1,303
|
ttt
------------------ "FOUNDER OF 47-72 BOWTIE CLUB OF THE CAROLINAS" Yes my name is Tony AKAbig71 has a 1971 WITH 25 OPTIOS AND BIG 402 I live in jonesville NC www.parduescustombodyshop.freeservers.com JPARDUE1@TRIAD.RR.COM www.47-72BowTieClubOfTheCarolinas.com God Bless America |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
