Billet Radio Plate for cut dash...opinions? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mahanian · 06-03-2008, 10:24 PM

Quote:

Originally Posted by tcb-1

I have used a vibratory tumbler with walnut sheels and a good dose of Mother's Power Metal polish.

dude, I think you have some customers here! nice clean design. period. I really like the hidden mounting screws. what size? #8 or #10 threads??

yep, I'm with Caminokid. you should think of applying for a patent...... at least get it in the process that way you would have proprietary rights.

They are #8 screws, more than adequate to hold it in place

So, just by applying for the patent and getting the ball rolling I have proprietary rights? I'm new to this stuff.

copywritten · 06-03-2008, 10:52 PM

Quote:

Originally Posted by mahanian

They are #8 screws, more than adequate to hold it in place

So, just by applying for the patent and getting the ball rolling I have proprietary rights? I'm new to this stuff.

Here is a really good link for you about the patent and your rights. Hope this helps.

http://www.ipwatchdog.com/patent/patent-application/

VA72C10 · 06-03-2008, 09:58 PM

Would you be able to mount it on the dash to show how much of the recessed area that covers? My dash was really hacked up by the PO so i want to make sure it covers enough.

mahanian · 06-03-2008, 10:03 PM

If there is enough interest to produce a batch of these, I will pay to become a Vendor...thanks for the heads up VA72C10!

ChevLoRay · 06-04-2008, 04:00 PM

Count me in. That is an awesome piece of bling to clean up a slice/dice dash. Just say when and I'll ante up.

smokinstang70 · 02-21-2010, 11:10 PM

interested.. put me in line!!!

Thanks

**Already Gone** · 02-22-2010, 01:07 AM

I'll take one too.

Burb · 02-24-2010, 12:34 PM

Put me on the list ... (1) Polished please

dhc871 · 02-26-2010, 03:11 PM

Mahanian, I asked to be put in line for a radio bezel before,could you list who's in line?

Deuce · 06-03-2008, 10:04 PM

Will they cover the heater control hole??
If so I'll take 2. 1 for me and 1 for Arad68.

Shak · 06-03-2008, 10:09 PM

Those are awesome. Count me in please.

mahanian · 06-03-2008, 10:12 PM

Quote:

Originally Posted by Deuce

Will they cover the heater control hole??
If so I'll take 2. 1 for me and 1 for Arad68.

I just checked and it will fit over the heater control hole as well. It would be shifted to the right about a 1/4" to avoid the ignition ring, but once installed you'd never know this. So, yes...it will work for the heater control hole

VA72C10 · 06-03-2008, 10:35 PM

Quote:

Originally Posted by mahanian

I just checked and it will fit over the heater control hole as well. It would be shifted to the right about a 1/4" to avoid the ignition ring, but once installed you'd never know this. So, yes...it will work for the heater control hole

Can you post pics of that as well as it in the radio spot? Thanks!

Deuce · 06-04-2008, 12:11 AM

Quote:

Originally Posted by mahanian

I just checked and it will fit over the heater control hole as well. It would be shifted to the right about a 1/4" to avoid the ignition ring, but once installed you'd never know this. So, yes...it will work for the heater control hole

When you have 2 done can you PM me a address to send you a Money Order.

Thanks.

Arad68 · 06-03-2008, 11:30 PM

Quote:

Originally Posted by Deuce

Will they cover the heater control hole??
If so I'll take 2. 1 for me and 1 for Arad68.

Thanks Corie!!!

Deuce · 06-04-2008, 12:12 AM

Quote:

Originally Posted by Arad68

Thanks Corie!!!

If I get them shipped to you, can you send me mine??

Riveted1 · 06-04-2008, 12:28 AM

Nice work! I'm with some of the others, I would like to see it mounted in the dash, with and without a radio.

Arad68 · 06-04-2008, 01:28 AM

Quote:

Originally Posted by Deuce

If I get them shipped to you, can you send me mine??

I sure can!

ohsocountry86 · 06-04-2008, 02:00 AM

very very interested count me in

RaceAGMC · 06-03-2008, 10:46 PM

I'd def take one as well...way better than a cut dash.

68 short step · 06-03-2008, 10:52 PM

me me me, where do i paypal, i need one ASAP pleaseeeeeeee......
awsome product

Husker · 06-03-2008, 10:53 PM

You can also use ground up Corn Cobs and polish.
Ron

tcb-1 · 06-03-2008, 10:59 PM

good site and info on patents, Copywritten!

*FormerMember* · 06-03-2008, 11:15 PM

I am in for two.

cstanley · 06-04-2008, 12:55 AM

looks very nice. now i wish i still had a cut dash! better looking than i imagined from the first thread... good idea

06-03-2008, 09:58 PM	#3
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Billet Radio Plate for cut dash...opinions? Would you be able to mount it on the dash to show how much of the recessed area that covers? My dash was really hacked up by the PO so i want to make sure it covers enough.

06-03-2008, 10:03 PM	#4
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Radio Plate for cut dash...opinions? If there is enough interest to produce a batch of these, I will pay to become a Vendor...thanks for the heads up VA72C10! __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

06-04-2008, 04:00 PM	#5
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Billet Radio Plate for cut dash...opinions? Count me in. That is an awesome piece of bling to clean up a slice/dice dash. Just say when and I'll ante up. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

02-21-2010, 11:10 PM	#6
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: Billet Radio Plate for cut dash...opinions? interested.. put me in line!!! Thanks

02-22-2010, 01:07 AM	#7
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,074	Re: Billet Radio Plate for cut dash...opinions? I'll take one too. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

02-24-2010, 12:34 PM	#8
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: Billet Radio Plate for cut dash...opinions? Put me on the list ... (1) Polished please __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

02-26-2010, 03:11 PM	#9
dhc871 Registered User Join Date: Aug 2009 Location: El Paso, TX Posts: 16	Re: Billet Radio Plate for cut dash...opinions? Mahanian, I asked to be put in line for a radio bezel before,could you list who's in line?

06-03-2008, 10:04 PM	#10
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	Re: Billet Radio Plate for cut dash...opinions? Will they cover the heater control hole?? If so I'll take 2. 1 for me and 1 for Arad68. __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

06-03-2008, 10:09 PM	#11
Shak Registered User Join Date: May 2007 Location: Spring Valley, CA Posts: 49	Re: Billet Radio Plate for cut dash...opinions? Those are awesome. Count me in please.

06-04-2008, 12:28 AM	#17
Riveted1 Tasty Cakes! Join Date: Apr 2003 Location: Gilbert, AZ Posts: 2,112	Re: Billet Radio Plate for cut dash...opinions? Nice work! I'm with some of the others, I would like to see it mounted in the dash, with and without a radio. __________________ I'm a little and a lot Ground beef: A cow with no legs. ---------------- '66 Chevy SWB "Penny" '67 Chevy Big Window SWB- aka "Pearl" '72 Burb- "Betty" "It's not a hearse dammit" '99 Chevy Ext. cab Silverado

06-04-2008, 02:00 AM	#19
ohsocountry86 Registered User Join Date: Feb 2008 Location: clackamas oregon Posts: 269	Re: Billet Radio Plate for cut dash...opinions? very very interested count me in __________________ I can die happy now i own a c-10 TRICKNRACY cars baby TRICKNRACYCARS.ORG

06-03-2008, 10:46 PM	#20
RaceAGMC Registered User Join Date: Jul 2007 Location: Charlotte, NC Posts: 350	Re: Billet Radio Plate for cut dash...opinions? I'd def take one as well...way better than a cut dash.

06-03-2008, 10:52 PM	#21
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: Billet Radio Plate for cut dash...opinions? me me me, where do i paypal, i need one ASAP pleaseeeeeeee...... awsome product

06-03-2008, 10:53 PM	#22
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,212	Re: Billet Radio Plate for cut dash...opinions? You can also use ground up Corn Cobs and polish. Ron __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

06-03-2008, 10:59 PM	#23
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Billet Radio Plate for cut dash...opinions? good site and info on patents, Copywritten! __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson



Register or Log In To remove these advertisements.

06-03-2008, 11:15 PM	#24
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Billet Radio Plate for cut dash...opinions? I am in for two.

06-04-2008, 12:55 AM	#25
cstanley Senior Member Join Date: Oct 2005 Location: Austin, TX Posts: 1,229	Re: Billet Radio Plate for cut dash...opinions? looks very nice. now i wish i still had a cut dash! better looking than i imagined from the first thread... good idea __________________ "Anybody who would paint his truck like this, would go to a minister's funeral dressed in feathers!" - Big Enis Burdett '72 Blazer Restoration Blog: http://sportchicken.blogspot.com/

Register or Log In To remove these advertisements.