1969 Short Wide - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

my67chevytruck · 01-20-2010, 08:31 AM

SHOWOFF! Looks good.....

0331grunt · 01-20-2010, 08:42 AM

Looks great! now that you know how, you wanna come do mine

mcbassin · 01-20-2010, 09:05 AM

Quote:

Originally Posted by my67chevytruck

SHOWOFF! Looks good.....

Thanks Heath. I tried to do it 2 other times with 22 gauge and it's just way too thin. It didn't turn out as good as I would have liked but I think I can tweek it here and there and it will be fine.

Quote:

Originally Posted by 0331grunt

Looks great! now that you know how, you wanna come do mine

I'll pass on that right now, maybe after a few weeks..... months....after I forget how frustrating it was.

0331grunt · 01-20-2010, 09:13 AM

Quote:

Originally Posted by mcbassin

I'll pass on that right now, maybe after a few weeks..... months....after I forget how frustrating it was.

Maybe by the time I get ready for it, you'll have forgotten

JohnC · 01-20-2010, 09:42 AM

Looks good Mike. Great job!

VA72C10 · 01-20-2010, 10:30 AM

Looks great man!!!

*highperf4x4* · 01-20-2010, 01:08 PM

Dang, that is alot of work. How did you manage to keep it all even?

mcbassin · 01-20-2010, 03:50 PM

Quote:

Originally Posted by JohnC

Looks good Mike. Great job!

Thanks!

Quote:

Originally Posted by VA72C10

Looks great man!!!

Thanks!

Quote:

Originally Posted by highperf4x4

Dang, that is alot of work. How did you manage to keep it all even?

Yep, it is a lot of work. As far as keep it even, I set my angle protractor like this one here at 45deg. and scribed a line all the way around the edge then held it in place and tacked it. then used vise grips to force it to the
line. It was slow going. BTW, it isn't close to perfect, but I have it close enough a skim coat of filler will smooth it nice.

*highperf4x4* · 01-20-2010, 07:49 PM

I'm impressed. Not that I doubted your skills anyway.

scotts62 · 01-20-2010, 08:55 PM

Cool! looks good!, i did the ole 90 degree angle on mine

mcbassin · 01-20-2010, 09:09 PM

Quote:

Originally Posted by scotts62

Cool! looks good!, i did the ole 90 degree angle on mine

Yep, I came this -><- to just doing the 90 degree on this one too. But, I figured heck, it's only metal and this will be a driver not a show truck.

mcbassin · 01-20-2010, 09:09 PM

Quote:

Originally Posted by highperf4x4

I'm impressed. Not that I doubted your skills anyway.

Thanks Travis!

ripdog28 · 01-30-2010, 09:33 PM

Welds turned out great on the firewall. I wish i would have spent more time on mine. Looking good man.

mcbassin · 01-30-2010, 10:42 PM

Quote:

Originally Posted by ripdog28

Welds turned out great on the firewall. I wish i would have spent more time on mine. Looking good man.

Thanks! I hope to get back on it pretty soon. We are covered up with snow and ice right now and I don't have heat in the shop. I was looking at the cab the other day and found a little rust spot on the lower part of the driver side cab corner. I wasn't planning on doing anything to them except knocking out a few dents. Now it looks like I may be cutting and welding. I wish I could have sand blasted the whole thing to find all the thin areas. Maybe I will on the next build.

0331grunt · 01-31-2010, 12:31 PM

At least I have a small heater... not much, but it does allow me to get out in this weather. We have about 6" of snow. I really need to get my cab inside soon to start working on it, now that my frame is almost done. I am still nervous about the welding... practice makes perfect, right? (or is it practice makes work for someone else

) Keep it up! Maybe you will be driving it to the Spring meet?

**rob32472** · 01-31-2010, 01:50 PM

looks great keep up the good work!

mcbassin · 01-31-2010, 06:29 PM

Quote:

Originally Posted by 0331grunt

At least I have a small heater... not much, but it does allow me to get out in this weather. We have about 6" of snow. I really need to get my cab inside soon to start working on it, now that my frame is almost done. I am still nervous about the welding... practice makes perfect, right? (or is it practice makes work for someone else

) Keep it up! Maybe you will be driving it to the Spring meet?

Thanks! don't sweat the welding you will get the hang of it I'm sure. It will take some major work and some $$ to get it done by spring.

Quote:

Originally Posted by rob32472

looks great keep up the good work!

Thanks!

72BlckButy · 01-31-2010, 06:58 PM

Nice work Mike, the firewall looks good!

68 TT · 02-03-2010, 05:58 PM

Nice progress. It gives me some motivation to work on my basket case 67 C-10.

Keep up the good work.

mcbassin · 02-03-2010, 09:08 PM

Quote:

Originally Posted by 72BlckButy

Nice work Mike, the firewall looks good!

Thanks Nate!

Quote:

Originally Posted by 68 TT

Nice progress. It gives me some motivation to work on my basket case 67 C-10.

Keep up the good work.

Thanks! now if I could stay motivated to get the next phase started. Gonna have to do something this week it's been a few weeks since I touched it.

scotts62 · 02-03-2010, 11:31 PM

I know the feeling its hard though if its cold, i dont get too motivated when its cold

mcbassin · 02-03-2010, 11:38 PM

Quote:

Originally Posted by scotts62

I know the feeling its hard though if its cold, i dont get too motivated when its cold

Had plans to work on it tonight...life gets in the way some times. and your right on it has been cold for what 3 weeks now? Sucks

scotts62 · 02-03-2010, 11:41 PM

Yeah i hear ya about life ha ha but the priorities come first i guess.. i painted a Harley tonight, pics in the crew cab build, priorities came first

*highperf4x4* · 02-04-2010, 01:18 AM

priorities suck..............

I'm just sayin...............

scotts62 · 02-04-2010, 08:38 AM

01-20-2010, 08:31 AM	#201
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 1969 Short Wide SHOWOFF! Looks good..... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

01-20-2010, 08:42 AM	#202
0331grunt Now what?? Join Date: Sep 2009 Location: Webbers Falls, OK Posts: 579	Re: 1969 Short Wide Looks great! now that you know how, you wanna come do mine __________________ 69 Long Fleet - Project 06 Ram 1ton Cummins 4x4-DD 01 Tahoe- wifes "The quality of a persons life is in direct proportion to their commitment to excellence, regardless of their chosen field of endeavor." ~ Vince Lombardi "A dream doesn't become reality through magic, it takes sweat, determination and hard work." ~ Colin Powell my, um, build USMC OIF Veteran SEMPER FI!

01-20-2010, 09:42 AM	#205
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: 1969 Short Wide Looks good Mike. Great job!

01-20-2010, 10:30 AM	#206
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1969 Short Wide Looks great man!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-20-2010, 01:08 PM	#207
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: 1969 Short Wide Dang, that is alot of work. How did you manage to keep it all even?

01-20-2010, 07:49 PM	#209
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: 1969 Short Wide I'm impressed. Not that I doubted your skills anyway.

01-20-2010, 08:55 PM	#210
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: 1969 Short Wide Cool! looks good!, i did the ole 90 degree angle on mine __________________ Scott 93 crew cab build Project 62

01-30-2010, 09:33 PM	#213
ripdog28 Registered User Join Date: Apr 2008 Location: Imperial Beach, CA Posts: 1,040	Re: 1969 Short Wide Welds turned out great on the firewall. I wish i would have spent more time on mine. Looking good man. __________________ 69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles.3.5/6in drop. My Build.

01-31-2010, 12:31 PM	#215
0331grunt Now what?? Join Date: Sep 2009 Location: Webbers Falls, OK Posts: 579	Re: 1969 Short Wide At least I have a small heater... not much, but it does allow me to get out in this weather. We have about 6" of snow. I really need to get my cab inside soon to start working on it, now that my frame is almost done. I am still nervous about the welding... practice makes perfect, right? (or is it practice makes work for someone else ) Keep it up! Maybe you will be driving it to the Spring meet? __________________ 69 Long Fleet - Project 06 Ram 1ton Cummins 4x4-DD 01 Tahoe- wifes "The quality of a persons life is in direct proportion to their commitment to excellence, regardless of their chosen field of endeavor." ~ Vince Lombardi "A dream doesn't become reality through magic, it takes sweat, determination and hard work." ~ Colin Powell my, um, build USMC OIF Veteran SEMPER FI!

01-31-2010, 01:50 PM	#216
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,503	Re: 1969 Short Wide looks great keep up the good work!

01-31-2010, 06:58 PM	#218
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 1969 Short Wide Nice work Mike, the firewall looks good! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

02-03-2010, 05:58 PM	#219
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: 1969 Short Wide Nice progress. It gives me some motivation to work on my basket case 67 C-10. Keep up the good work. __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars

02-03-2010, 11:31 PM	#221
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: 1969 Short Wide I know the feeling its hard though if its cold, i dont get too motivated when its cold __________________ Scott 93 crew cab build Project 62

02-03-2010, 11:41 PM	#223
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: 1969 Short Wide Yeah i hear ya about life ha ha but the priorities come first i guess.. i painted a Harley tonight, pics in the crew cab build, priorities came first __________________ Scott 93 crew cab build Project 62

02-04-2010, 01:18 AM	#224
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: 1969 Short Wide priorities suck.............. I'm just sayin...............



Register or Log In To remove these advertisements.

02-04-2010, 08:38 AM	#225
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: 1969 Short Wide __________________ Scott 93 crew cab build Project 62

Register or Log In To remove these advertisements.