project 62 - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scotts62 · 05-27-2009, 05:28 PM

Quote:

Originally Posted by jason65

So I take it your bags and suspension are in?

They should be up and running here in a coupls hours.

Quote:

Originally Posted by highperf4x4

I would drop by but I have to run those wheels I bought from John down to Lex after work.

Yeah we see how you are

Inverter · 05-27-2009, 05:41 PM

Quote:

Originally Posted by scotts62

Thanks, I made it as if it had a 2.5 Z. But other than that the front crossmember mounting is all the same as normal. Is that what you were talking about?

Yea,kinda.
I was wondering how much you raised the hump for trans clearance.

protrash64 · 05-27-2009, 09:52 PM

That frame is looking nice, Scott.

How much planning did it take to get it this way? Looks like I woulda had a phone book worth of sticky notes to get it right.

scotts62 · 05-27-2009, 09:55 PM

Quote:

Originally Posted by Inverter

Yea,kinda.
I was wondering how much you raised the hump for trans clearance.

Its in the works for raising it, i took out the factory hump out ans was just going to make it even with the hump in the floor, its hard to explain but in simpler words the trans barely touched the floor and im going to raise it up 2" anyways.

scotts62 · 05-27-2009, 09:59 PM

Quote:

Originally Posted by protrash64

That frame is looking nice, Scott.

How much planning did it take to get it this way? Looks like I woulda had a phone book worth of sticky notes to get it right.

Well i had a steno notebook worth of ideas and plans, i think its going my way but well see

scotts62 · 05-27-2009, 10:03 PM

Well i got a bunch done today and a BIG thanks to Tim (TimE) and Joe

Its starting to look like a truck

Just lean your head to the side to make the engine look right

4dranch · 05-27-2009, 10:09 PM

Progress,,,,,,Progress,,,,,,,,Progress

jgh64pkup · 05-27-2009, 10:11 PM

i like

Alan's Classic · 05-27-2009, 10:16 PM

Quote:

Originally Posted by scotts62

Just lean your head to the side to make the engine look right

Is that new slant V8?

It really looks great. Gotta love progress. It's always cool when the cab goes on.

scotts62 · 05-27-2009, 10:18 PM

Thanks Guys!!

Yeah Alan thats the new style

joe231 · 05-27-2009, 10:43 PM

Hey
You got a flat

Almost a roller!!!

*highperf4x4* · 05-27-2009, 11:19 PM

Awesome! You guys did some good............

4dranch · 05-27-2009, 11:20 PM

[QUOTE=joe231;3330840]Hey You got a flat QUOTE]

So thats not what you meen when you say "letting the air out to lower it"??

*highperf4x4* · 05-27-2009, 11:20 PM

Quote:

Originally Posted by Inverter

Yea,kinda.
I was wondering how much you raised the hump for trans clearance.

He made a cool center console that runs front to back too

TimE · 05-27-2009, 11:49 PM

Quote:

Originally Posted by scotts62

Well i got a bunch done today and a BIG thanks to Tim (TimE) and Joe

Anytime I'm in the neighborhood, I'll gladly help ya. Unfortunately, I'm not in the neighbor very often.

Now I can tell everybody I helped work on a custom truck.

The frame looks nice, btw.

Alan's Classic · 05-27-2009, 11:50 PM

[quote=4dranch;3330929]

Quote:

Originally Posted by joe231

Hey You got a flat QUOTE]

So thats not what you meen when you say "letting the air out to lower it"??

scotts62 · 05-28-2009, 07:22 AM

[quote=4dranch;3330929]

Quote:

Originally Posted by joe231

Hey You got a flat QUOTE]

So thats not what you meen when you say "letting the air out to lower it"??

Yeah it wasn't low enough for me..

Quote:

Originally Posted by TimE

Anytime I'm in the neighborhood, I'll gladly help ya. Unfortunately, I'm not in the neighbor very often.

Now I can tell everybody I helped work on a custom truck.

The frame looks nice, btw.

Thanks Tim! Hey an 800 mile trip to lend a helping hand

jason65 · 05-28-2009, 07:34 AM

You have been just workin your a$$ off this past week or so. Great progress. But now your wife knows you can do it and will expect more work from you now.

scotts62 · 05-28-2009, 07:39 AM

Quote:

Originally Posted by jason65

You have been just workin your a$$ off this past week or so. Great progress. But now your wife knows you can do it and will expect more work from you now.

Thanks!
Yeah have been working on it a ton this last 2 weeks and now its down to crunch time.. not sure if i will have the hood on it or not before the meet..

joe231 · 05-28-2009, 10:50 PM

*highperf4x4* · 05-29-2009, 12:44 AM

Quote:

Originally Posted by joe231

Attachment 465570

He's too busy to tell us anything!

scotts62 · 05-29-2009, 07:16 AM

Got some more done yesterday

TimE · 05-29-2009, 07:23 AM

You da man Scott!!

4dranch · 05-29-2009, 07:27 AM

Quote:

Originally Posted by TimE

You da man Scott!!

Nice work Scott

scotts62 · 05-29-2009, 07:33 AM

I dont know about that but i can try like hell

Thanks guys

Have to finish front frame to hold the hood and its trailer ready..

05-27-2009, 09:52 PM	#328
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: project 62 That frame is looking nice, Scott. How much planning did it take to get it this way? Looks like I woulda had a phone book worth of sticky notes to get it right. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

05-27-2009, 10:03 PM	#331
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: project 62 Well i got a bunch done today and a BIG thanks to Tim (TimE) and Joe Its starting to look like a truck Just lean your head to the side to make the engine look right __________________ Scott 93 crew cab build Project 62

05-27-2009, 10:09 PM	#332
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: project 62 Progress,,,,,,Progress,,,,,,,,Progress __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

05-27-2009, 10:11 PM	#333
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: project 62 i like __________________ Gage 1967 C10 Shortbed Stepside

05-27-2009, 10:18 PM	#335
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: project 62 Thanks Guys!! Yeah Alan thats the new style __________________ Scott 93 crew cab build Project 62

05-27-2009, 10:43 PM	#336
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: project 62 Hey You got a flat Almost a roller!!! __________________ *CHEVY ONLY*

05-27-2009, 11:19 PM	#337
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: project 62 Awesome! You guys did some good............

05-27-2009, 11:20 PM	#338
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: project 62 [QUOTE=joe231;3330840]Hey You got a flat QUOTE] So thats not what you meen when you say "letting the air out to lower it"?? __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

05-28-2009, 07:34 AM	#343
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: project 62 You have been just workin your a$$ off this past week or so. Great progress. But now your wife knows you can do it and will expect more work from you now.

05-28-2009, 10:50 PM	#345
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: project 62 __________________ *CHEVY ONLY*

05-29-2009, 07:16 AM	#347
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: project 62 Got some more done yesterday __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 05-29-2009 at 07:18 AM.

05-29-2009, 07:23 AM	#348
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: project 62 You da man Scott!! __________________ Just hopin' I live long enough to finish something!!!

05-29-2009, 07:33 AM	#350
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: project 62 I dont know about that but i can try like hell Thanks guys Have to finish front frame to hold the hood and its trailer ready.. __________________ Scott 93 crew cab build Project 62



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.