IA 1970 Chevy C/20 Parting out - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Dieselwrencher** · 02-15-2011, 09:32 PM

Quote:

Originally Posted by FL71C10

Hey, just checking to make sure you know I want the crank pullies, alt and ps brackets, power steering pump, and ps hoses for $75 shipped. You were going to check to make sure it's a short water pump. I'm pretty sure it is, but pics can be hard to read. I'm interested in the fan and manifolds as well, but wanted to get more info. No rush, but I hadn't heard anything and wanted to make sure my place in line is reserved.

Thanks!
John

John, yep they are yours. I just haven't verified for sure if they are short or long yet. I will check them against my 350 in my 40 and see how they compare. I know it is SWP for sure. I don't want to sell you stuff you can't use. Thanks Ryan.

**Dieselwrencher** · 02-15-2011, 09:33 PM

Quote:

Originally Posted by CaptRMW

Ryan payment sent for the outside door handles. Thanks, Roger

Roger, I will get them off tomorrow for you. Ryan.

kcsa75 · 02-16-2011, 03:40 PM

Are the doors still available? Shipped to 66215
Posted via Mobile Device

highrpm · 02-17-2011, 09:19 AM

PM sent on door panel payment.

Fesser · 02-17-2011, 10:53 AM

I'm saying yes since he hasn't responded at all.

It has been awhile. Payment being sent on the trim via paypal. If he answers up before its shipped let me know. Frank

TripleNickel · 02-17-2011, 10:58 AM

PM Sent

Hottrucks · 02-17-2011, 05:04 PM

Quote:

Originally Posted by Fesser

Is hottrucks officially out on the side trim. I still want it if he is. Frank

Quote:

Originally Posted by Fesser

I'm saying yes since he hasn't responded at all.

It has been awhile. Payment being sent on the trim via paypal. If he answers up before its shipped let me know. Frank

Sorry Guys I'm trying to start a trucking Buisness right now and I'm swamped so I'll pass it no big deal but thanx for waiting....and sorrya again

camrycurt · 02-17-2011, 05:33 PM

Quote:

Originally Posted by Fesser

I'm saying yes since he hasn't responded at all.

It has been awhile. Payment being sent on the trim via paypal. If he answers up before its shipped let me know. Frank

Did Fesser take just the lower side trim or did he get the chrome tailgate and cab trim as well?

I think I was in line after him and would still be interested in a price with shipping for the chrome tailgate/taillight trim pieces and the chrome paint divider on the back of the cab below the rear window if those are still available.

Thanks!

72-c20 · 02-17-2011, 05:42 PM

Ryan, anyone in on the Eaton 3rd? if it's a 4.10 (based on engine and trans, I think it should be), how much? and does it have the ring deflection/load bolt? and how much for the rear axle shafts...

sjarrett71 · 02-18-2011, 05:57 PM

payment sent for fan shroud. I will have my sister or brother in law call you for pick up arrangements.

c1069 · 02-23-2011, 07:22 PM

still waiting for a response...

**karphan** · 02-26-2011, 04:52 PM

Waiting for response to PM sent about parts bought and if shipped. Thanks, Dan

FL71C10 · 02-26-2011, 05:11 PM

I'm still interested in the pulleys and the manifolds.

I hope you're ok.

sjarrett71 · 02-26-2011, 05:18 PM

He hasn't been in the board since 2-17 and doesn't answer his phone either. I'm waiting to hear from him so I can arrange my sister to pick up my part.

waterboyC10 · 02-26-2011, 06:53 PM

Interested in heater box both inside and outer with blower...ship to 91755

waterboyC10 · 02-26-2011, 09:01 PM

How much for the radio and heated box and blower..also for the inside heater control box...
Posted via Mobile Device

c1069 · 02-26-2011, 11:21 PM

deleted. I'll keep waiting

waterboyC10 · 02-26-2011, 11:27 PM

Interested in the heater box, and blower box, also the raidio and radiator over flow bottle and cage...ship to calif.91755

tow guys · 02-27-2011, 01:22 AM

Also waiting on a pm response about mirrors and when I should expect them.
Thanks,
Tony

Fesser · 02-27-2011, 01:30 AM

I haven't seen the wheel or the lower side trim. That being said, Dieselwrencher has been on here since 2007. I'm sure he isn't trying to hose anyone. Lets hope all is well on his end. Frank

tow guys · 02-27-2011, 01:51 AM

I hope he's just been real busy pullin the truck apart lol

**karphan** · 02-27-2011, 02:00 AM

Has anybody received any of the parts sold? I hope he's O.K. too but if no one has received any parts then you have to wonder. Thanks, Dan

c1069 · 02-27-2011, 02:46 AM

The last time he PM me and he told me was too sick. I hope he's okay.

tow guys · 02-27-2011, 10:19 AM

Ryan, I hope you're feeling better real soon. As for the mirrors, I'm in no huge rush, Ship em when ya can

sjarrett71 · 02-27-2011, 11:19 PM

My sister and brother in law were able to pick up the part I bought from him.

02-16-2011, 03:40 PM	#78
kcsa75 Registered User Join Date: Oct 2010 Location: Kansas City Posts: 3,590	Re: 1970 Chevy C/20 Parting out Are the doors still available? Shipped to 66215 Posted via Mobile Device __________________ Willie Swamp Angel Truckers '72 C10 Highlander *People who blindly follow a GPS end up on television programs on The Weather Channel. Some survive, some don't.*

02-17-2011, 09:19 AM	#79
highrpm Registered User Join Date: Dec 2004 Location: Davidson, NC Posts: 269	Re: 1970 Chevy C/20 Parting out PM sent on door panel payment.

02-17-2011, 10:53 AM	#80
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: 1970 Chevy C/20 Parting out I'm saying yes since he hasn't responded at all. It has been awhile. Payment being sent on the trim via paypal. If he answers up before its shipped let me know. Frank

02-17-2011, 10:58 AM	#81
TripleNickel Registered User Join Date: May 2010 Location: Akron, Ohio Posts: 154	Re: 1970 Chevy C/20 Parting out PM Sent

02-17-2011, 05:42 PM	#84
72-c20 Packrat Join Date: May 2008 Location: Central Iowa Posts: 459	Re: 1970 Chevy C/20 Parting out Ryan, anyone in on the Eaton 3rd? if it's a 4.10 (based on engine and trans, I think it should be), how much? and does it have the ring deflection/load bolt? and how much for the rear axle shafts... __________________ gone: --'07 Tahoe LTZ 4WD --'68 Firebird 400 Convertible gone: --'72 Chevy K20 Last edited by 72-c20; 02-17-2011 at 05:43 PM.

02-18-2011, 05:57 PM	#85
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: 1970 Chevy C/20 Parting out payment sent for fan shroud. I will have my sister or brother in law call you for pick up arrangements. __________________ -Scott-

02-23-2011, 07:22 PM	#86
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: 1970 Chevy C/20 Parting out still waiting for a response... __________________ Pancho 69 c/10 step side 454/400 with 3.07

02-26-2011, 04:52 PM	#87
karphan Senior Member Join Date: Nov 2010 Location: Sparks, NV Posts: 258	Re: 1970 Chevy C/20 Parting out Waiting for response to PM sent about parts bought and if shipped. Thanks, Dan

02-26-2011, 05:11 PM	#88
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,506	Re: 1970 Chevy C/20 Parting out I'm still interested in the pulleys and the manifolds. I hope you're ok. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

02-26-2011, 05:18 PM	#89
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: 1970 Chevy C/20 Parting out He hasn't been in the board since 2-17 and doesn't answer his phone either. I'm waiting to hear from him so I can arrange my sister to pick up my part. __________________ -Scott-

02-26-2011, 06:53 PM	#90
waterboyC10 Registered User Join Date: Feb 2011 Location: monterey park Posts: 29	Re: 1970 Chevy C/20 Parting out Interested in heater box both inside and outer with blower...ship to 91755

02-26-2011, 09:01 PM	#91
waterboyC10 Registered User Join Date: Feb 2011 Location: monterey park Posts: 29	Re: 1970 Chevy C/20 Parting out How much for the radio and heated box and blower..also for the inside heater control box... Posted via Mobile Device

02-26-2011, 11:21 PM	#92
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: 1970 Chevy C/20 Parting out deleted. I'll keep waiting __________________ Pancho 69 c/10 step side 454/400 with 3.07 Last edited by c1069; 03-01-2011 at 01:50 AM.

02-26-2011, 11:27 PM	#93
waterboyC10 Registered User Join Date: Feb 2011 Location: monterey park Posts: 29	Re: 1970 Chevy C/20 Parting out Interested in the heater box, and blower box, also the raidio and radiator over flow bottle and cage...ship to calif.91755

02-27-2011, 01:22 AM	#94
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: 1970 Chevy C/20 Parting out Also waiting on a pm response about mirrors and when I should expect them. Thanks, Tony __________________ Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org



Register or Log In To remove these advertisements.

02-27-2011, 01:30 AM	#95
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: 1970 Chevy C/20 Parting out I haven't seen the wheel or the lower side trim. That being said, Dieselwrencher has been on here since 2007. I'm sure he isn't trying to hose anyone. Lets hope all is well on his end. Frank

02-27-2011, 01:51 AM	#96
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: 1970 Chevy C/20 Parting out I hope he's just been real busy pullin the truck apart lol __________________ Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org

02-27-2011, 02:00 AM	#97
karphan Senior Member Join Date: Nov 2010 Location: Sparks, NV Posts: 258	Re: 1970 Chevy C/20 Parting out Has anybody received any of the parts sold? I hope he's O.K. too but if no one has received any parts then you have to wonder. Thanks, Dan

02-27-2011, 02:46 AM	#98
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: 1970 Chevy C/20 Parting out The last time he PM me and he told me was too sick. I hope he's okay. __________________ Pancho 69 c/10 step side 454/400 with 3.07

02-27-2011, 10:19 AM	#99
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: 1970 Chevy C/20 Parting out Ryan, I hope you're feeling better real soon. As for the mirrors, I'm in no huge rush, Ship em when ya can __________________ Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org

02-27-2011, 11:19 PM	#100
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: 1970 Chevy C/20 Parting out My sister and brother in law were able to pick up the part I bought from him. __________________ -Scott-

Register or Log In To remove these advertisements.