|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-21-2018, 07:17 PM
|
#1 |
|
Registered User
Join Date: Jun 2018
Location: Calgary
Posts: 10
|
How do I wire in electric speedometer with 700r4
I have a TBI 350 with a 700r4 in my 69 c10 from a 1990 c1500 and have a few questions. First there is 1 purple wire and 1 yellow twisted together from the tailshft which I assume is for the vss? To tie this in with the ECM do I just ground one and and attach the other to the vss wire on the ECM? For an aftermarket electric speedometer do I splice off of the wire to the ECM? Any help would be greatly appreciated.
|
|
|
|
10-22-2018, 06:45 AM
|
#2 |
|
Registered User
Join Date: Apr 2008
Location: Md
Posts: 2,451
|
Re: How do I wire in electric speedometer with 700r4
You might need a Drac module also....Ls1nova is the guy to ask...good luck.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=635605 |
|
|
|
|
10-22-2018, 03:16 PM
|
#3 |
|
Registered User
Join Date: Jan 2011
Location: Chattanooga, TN
Posts: 2,129
|
Re: How do I wire in electric speedometer with 700r4
You can probably change the tailhousing to one for a mechanical speedo unless you just want electronic. Then add a VSS generator inline to make the computer work.
__________________
'83 K20-TPI '73 C10 '79 C10-ex-diesel(SOLD) '07 Tahoe(Son driving) '14 Suburban-DD '71 C10-current project |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
