How many 2wd Blazers do we have? - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**lolife99** · 12-04-2012, 07:30 PM

One of my favorite 2wd blazers from the shows this year,...

blckbety80 · 12-04-2012, 07:44 PM

Quote:

Originally Posted by xxlf250

thanks its a work in progress

you got anymore pics besides whats on your build thread im in the process of starting a conversion myself and would like to see more in detail how you went about it looks killer man.

68Timber · 12-04-2012, 08:04 PM

Quote:

Originally Posted by lolife99

One of my favorite 2wd blazers from the shows this year,...

Sorry for the sidebar, Keith do you know what years that grill was offered? That looks like a '77, I have that grill on my '79 but I bought it so long ago I don't recall how it was advertised.

**lolife99** · 12-04-2012, 08:12 PM

The blazer appears to be a '77.
I'm not sure about the grille.

xxlf250 · 12-04-2012, 08:20 PM

Quote:

Originally Posted by blckbety80

you got anymore pics besides whats on your build thread im in the process of starting a conversion myself and would like to see more in detail how you went about it looks killer man.

pm'ed you

xxlf250 · 12-04-2012, 08:21 PM

Quote:

Originally Posted by lolife99

One of my favorite 2wd blazers from the shows this year,...

Wow that's nice, can't wait to finish mine.........

Blazin77 · 12-06-2012, 03:42 PM

ben.peterson, I thought your Blazer looked familiar...

http://www.hubgarage.com/mygarage/Fe...vehicles/33079

Dusty

made2drag · 12-06-2012, 06:40 PM

Quote:

Originally Posted by lolife99

One of my favorite 2wd blazers from the shows this year,...

bad to the bone

**67cheby** · 12-07-2012, 07:53 PM

this one will be very SOON !

xxlf250 · 12-09-2012, 05:22 PM

Quote:

Originally Posted by 67cheby

this one will be very SOON !

cant wait to see this.

**67cheby** · 12-10-2012, 10:02 AM

thanks man

made2drag · 12-10-2012, 10:11 AM

Quote:

Originally Posted by 67cheby

this one will be very SOON !

another showstopper on its way!

american revolution · 12-13-2012, 06:06 AM

when the blazer is slammed to the floor like that do you lose the back seat?

made2drag · 12-13-2012, 10:20 AM

Quote:

Originally Posted by american revolution

when the blazer is slammed to the floor like that do you lose the back seat?

ive seen alot of laid out k5's with the back seat still there. some people raise the floor in the rear and mount the back seat to the floor. you can see on the black blazer a few post back that it still has a back seat. by the way.....love your blz...if your thinking of baggin it. bag the front first as low as you are gonna go, then measure how much you need in the rear...it could be all you will need is a c-notch, which will leave the rear floor untouched. i dont think you would have to worry about driveshaft clearance either(no tubs needed)

xxlf250 · 12-13-2012, 10:22 AM

It depends on what you call a back seat.....

With my notch and cover it going to take a smaller seat, stoc one will sit to high.
Posted via Mobile Device
Posted via Mobile Device

made2drag · 12-13-2012, 10:28 AM

Quote:

Originally Posted by xxlf250

It depends on what you call a back seat.....

With my notch and cover it going to take a smaller seat, stoc one will sit to high.
Posted via Mobile Device
Posted via Mobile Device

if he just lays stock crossmember will he need a step or just a c-notch?

xxlf250 · 12-13-2012, 12:13 PM

when I measured mine it seemed I could notch to the stock floor and be good.

made2drag · 12-13-2012, 04:13 PM

Quote:

Originally Posted by xxlf250

when I measured mine it seemed I could notch to the stock floor and be good.

thanks

xxlf250 · 12-13-2012, 05:30 PM

but what i have learned is no matter which way you bag these k5's there is no room in rear of them....lol

maxxxy · 12-14-2012, 03:38 AM

Quote:

Originally Posted by lolife99

One of my favorite 2wd blazers from the shows this year,...

That's a sweet blazer! The wheels are really sucked in though. Maybe too much in my opinion. Does anyone know how this was accomplished?

made2drag · 12-17-2012, 11:55 AM

Quote:

Originally Posted by maxxxy

That's a sweet blazer! The wheels are really sucked in though. Maybe too much in my opinion. Does anyone know how this was accomplished?

im guessing narrowed control arms and narrowed rear end

xxlf250 · 12-17-2012, 04:35 PM

Quote:

Originally Posted by made2drag

im guessing narrowed control arms and narrowed rear end

x2

**lolife99** · 12-17-2012, 06:49 PM

Quote:

Originally Posted by maxxxy

That's a sweet blazer! The wheels are really sucked in though. Maybe too much in my opinion. Does anyone know how this was accomplished?

You have to be able to clear the narrowest part of the front fender, when lay'd out.
In this case,... its the top of the fender,... NOT the part of the fender that flares out (at the moulding).
Plus to drive and turn low,... the tire turn inside the fender, NOT thru the wheel opening.

BaggedRanger · 12-18-2012, 02:53 AM

Quote:

Originally Posted by made2drag

im guessing narrowed control arms and narrowed rear end

Could also be the porterbuilt front end or something comparable.. It will narrow the front I think a inch and a half on each side.

Next year mine is going to get a new motor and also install the new drop member kit I have for it.. So at least the front will be bagged..

made2drag · 12-18-2012, 10:03 AM

Quote:

Originally Posted by BaggedRanger

Could also be the porterbuilt front end or something comparable.. It will narrow the front I think a inch and a half on each side.

Next year mine is going to get a new motor and also install the new drop member kit I have for it.. So at least the front will be bagged..

i think your right, most likely it is a porterbuilt... the wheels are in some and its laying hard.

12-04-2012, 07:30 PM	#276
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,681	Re: How many 2wd Blazers do we have? One of my favorite 2wd blazers from the shows this year,... Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-04-2012, 08:12 PM	#279
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,681	Re: How many 2wd Blazers do we have? The blazer appears to be a '77. I'm not sure about the grille. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-06-2012, 03:42 PM	#282
Blazin77 Registered User Join Date: Apr 2010 Location: Liberty, Texas Posts: 56	Re: How many 2wd Blazer do we have? ben.peterson, I thought your Blazer looked familiar... http://www.hubgarage.com/mygarage/Fe...vehicles/33079 Dusty __________________ In the words of Huey Lewis.. "It's Hip to be Square". 1977 Blazer ............________ .........../_____ \|__\__ ..........\|_(O)______(O)]

12-07-2012, 07:53 PM	#284
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How many 2wd Blazers do we have? this one will be very SOON ! Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-10-2012, 10:02 AM	#286
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How many 2wd Blazers do we have? thanks man __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-13-2012, 06:06 AM	#288
american revolution Registered User Join Date: Apr 2007 Location: san francisco Posts: 446	Re: How many 2wd Blazers do we have? when the blazer is slammed to the floor like that do you lose the back seat?

12-13-2012, 10:22 AM	#290
xxlf250 Registered User Join Date: Dec 2010 Location: Indio, So.Cal Posts: 178	Re: How many 2wd Blazers do we have? It depends on what you call a back seat..... With my notch and cover it going to take a smaller seat, stoc one will sit to high. Posted via Mobile Device Posted via Mobile Device

12-13-2012, 12:13 PM	#292
xxlf250 Registered User Join Date: Dec 2010 Location: Indio, So.Cal Posts: 178	Re: How many 2wd Blazers do we have? when I measured mine it seemed I could notch to the stock floor and be good.

12-13-2012, 05:30 PM	#294
xxlf250 Registered User Join Date: Dec 2010 Location: Indio, So.Cal Posts: 178	Re: How many 2wd Blazers do we have? but what i have learned is no matter which way you bag these k5's there is no room in rear of them....lol



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.