GA Sail panels, deluxe heater control , & more - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**southern parts** · 07-11-2019, 10:45 AM

Sail panels - driver quality with some scratches and dings, one screw hole broke. $75, Sold

Deluxe heater control with cables and harness , no broken levers , good knobs . $80 sold

1962 Aluminum headlight bezel, driver quality with some small dents and dings around the bottom $50

RV junior mirrors- plenty of patina, one head cracked . $75 Sold

1966 1/2 ton clip type hubcap. Rough condition $15

Gas filler neck-$30

Cowl / kick panel vents- good condition, some surface rust , gaskets still good. $60

Steel upper rad hoses-$40 ea

V8 upper rad bracket with rubber cushions -$50 sold

Glove box door. -$30

All prices are plus shipping.

**southern parts** · 07-11-2019, 10:48 AM

Few more pics

**MikeN** · 07-11-2019, 10:59 AM

I'll take the better of the two steel upper radiator hose/pipes. Will send you a PM.

**pimpston65** · 07-11-2019, 12:16 PM

i'll take the heater control.

**southern parts** · 07-11-2019, 12:58 PM

I will try to get some totals with shipping this evening when I get in from work

Lokin4AReason · 07-11-2019, 03:49 PM

Man, been looking for some upper radiator steel tubes =/
Matk me second if it doesnt fall thru . . .

**LostMy65** · 07-11-2019, 04:04 PM

Quote:

Originally Posted by Lokin4AReason

Man, been looking for some upper radiator steel tubes =/
Matk me second if it doesnt fall thru . . .

I think he said he has two.

**southern parts** · 07-11-2019, 04:46 PM

Yes , I have 2.

**chtr65** · 07-11-2019, 05:07 PM

I will take the upper radiator bracket for V-8, if it is correct for 64 year. Thanks

**southern parts** · 07-12-2019, 10:14 AM

I little closer look at both steel upper rad hoses . both have some pretty bad pitting and rust, probably not worth taking a chance on
pimpston65 and chtr65 I can fit both your parts in med. flat rate boxes. sending pm`s shortly

**MikeN** · 07-12-2019, 11:35 AM

Too bad on the upper radiator pipes, appreciate you checking them out closely.

**pimpston65** · 07-12-2019, 02:51 PM

payment sent.

**pimpston65** · 07-12-2019, 02:54 PM

Quote:

Originally Posted by southern parts

I little closer look at both steel upper rad hoses . both have some pretty bad pitting and rust, probably not worth taking a chance on
pimpston65 and chtr65 I can fit both your parts in med. flat rate boxes. sending pm`s shortly

that part of the metal rad pipe is in the rubber part of the hose, it should still work and not leak. just my 2 cents

**MikeN** · 07-12-2019, 03:12 PM

Quote:

Originally Posted by pimpston65

that part of the metal rad pipe is in the rubber part of the hose, it should still work and not leak. just my 2 cents

Yeah, the one on the left doesn't look too bad, if the other end is no worse I'm still interested. PM me if you still want to sell.

**LostMy65** · 07-12-2019, 06:46 PM

If you decide one of the radiator pipes is beyond usable, I might be interested in trying to create a cad template from it that someone could take down to the muffler shop and have one bent out of stainless.

**southern parts** · 07-17-2019, 11:00 AM

Winston, the heater control is on the way. You might even have by now.

**pimpston65** · 07-17-2019, 12:06 PM

Quote:

Originally Posted by southern parts

Winston, the heater control is on the way. You might even have by now.

sure did get it,safe and sound...

**LostMy65** · 07-17-2019, 03:47 PM

Are both radiator pipes sold?

**southern parts** · 07-17-2019, 07:21 PM

LostMy65- no, I still have one.

**LostMy65** · 07-17-2019, 09:54 PM

Did you say it was pretty rusted?
Would you do $40 shipped?

**southern parts** · 07-18-2019, 11:05 AM

It's pitted on both ends. Let me see how much shipping will be.

**LostMy65** · 07-20-2019, 08:27 PM

Quote:

Originally Posted by southern parts

It's pitted on both ends. Let me see how much shipping will be.

Payment sent.

**southern parts** · 08-02-2019, 09:10 PM

Bump

bcontractor · 08-04-2019, 12:16 AM

I like to see more pick of the glove box door ..shipped to 95407 ?

bcontractor · 08-06-2019, 07:44 PM

I will take the glove box door ,shipped to 95407

07-11-2019, 10:45 AM	#1
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,469	Sail panels, deluxe heater control , & more Sail panels - driver quality with some scratches and dings, one screw hole broke. $75, Sold Deluxe heater control with cables and harness , no broken levers , good knobs . $80 sold 1962 Aluminum headlight bezel, driver quality with some small dents and dings around the bottom $50 RV junior mirrors- plenty of patina, one head cracked . $75 Sold 1966 1/2 ton clip type hubcap. Rough condition $15 Gas filler neck-$30 Cowl / kick panel vents- good condition, some surface rust , gaskets still good. $60 Steel upper rad hoses-$40 ea V8 upper rad bracket with rubber cushions -$50 sold Glove box door. -$30 All prices are plus shipping. Attached Images Last edited by southern parts; 11-25-2019 at 01:10 PM.

07-11-2019, 10:48 AM	#2
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,469	Re: Sail panels, deluxe heater control , & more Few more pics Attached Images

07-11-2019, 10:59 AM	#3
MikeN Senior Member Join Date: Oct 2007 Location: Marietta, GA Posts: 776	Re: Sail panels, deluxe heater control , & more I'll take the better of the two steel upper radiator hose/pipes. Will send you a PM.

07-11-2019, 12:16 PM	#4
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: Sail panels, deluxe heater control , & more i'll take the heater control.

07-11-2019, 12:58 PM	#5
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,469	Re: Sail panels, deluxe heater control , & more I will try to get some totals with shipping this evening when I get in from work

07-11-2019, 03:49 PM	#6
Lokin4AReason Registered User Join Date: Oct 2014 Location: a beer can .. Posts: 924	Re: Sail panels, deluxe heater control , & more Man, been looking for some upper radiator steel tubes =/ Matk me second if it doesnt fall thru . . . __________________ dont want to hear excuses, i want to hear solution(s)

07-11-2019, 04:46 PM	#8
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,469	Re: Sail panels, deluxe heater control , & more Yes , I have 2.

07-11-2019, 05:07 PM	#9
chtr65 Senior Member Join Date: Mar 2013 Location: Lewisberry, Pa. Posts: 537	Re: Sail panels, deluxe heater control , & more I will take the upper radiator bracket for V-8, if it is correct for 64 year. Thanks

07-12-2019, 10:14 AM	#10
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,469	Re: Sail panels, deluxe heater control , & more I little closer look at both steel upper rad hoses . both have some pretty bad pitting and rust, probably not worth taking a chance on pimpston65 and chtr65 I can fit both your parts in med. flat rate boxes. sending pm`s shortly Attached Images

07-12-2019, 11:35 AM	#11
MikeN Senior Member Join Date: Oct 2007 Location: Marietta, GA Posts: 776	Re: Sail panels, deluxe heater control , & more Too bad on the upper radiator pipes, appreciate you checking them out closely.

07-12-2019, 02:51 PM	#12
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: Sail panels, deluxe heater control , & more payment sent.

07-12-2019, 06:46 PM	#15
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,460	Re: Sail panels, deluxe heater control , & more If you decide one of the radiator pipes is beyond usable, I might be interested in trying to create a cad template from it that someone could take down to the muffler shop and have one bent out of stainless. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

07-17-2019, 11:00 AM	#16
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,469	Re: Sail panels, deluxe heater control , & more Winston, the heater control is on the way. You might even have by now.

07-17-2019, 03:47 PM	#18
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,460	Re: Sail panels, deluxe heater control , & more Are both radiator pipes sold? __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

07-17-2019, 07:21 PM	#19
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,469	Re: Sail panels, deluxe heater control , & more LostMy65- no, I still have one.



Register or Log In To remove these advertisements.

07-17-2019, 09:54 PM	#20
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,460	Re: Sail panels, deluxe heater control , & more Did you say it was pretty rusted? Would you do $40 shipped? __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

07-18-2019, 11:05 AM	#21
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,469	Re: Sail panels, deluxe heater control , & more It's pitted on both ends. Let me see how much shipping will be.

08-02-2019, 09:10 PM	#23
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,469	Re: Sail panels, deluxe heater control , & more Bump

08-04-2019, 12:16 AM	#24
bcontractor Registered User Join Date: Sep 2014 Location: santa rosa,california Posts: 65	Re: Sail panels, deluxe heater control , & more I like to see more pick of the glove box door ..shipped to 95407 ? __________________ There is more then one way to do it right !

08-06-2019, 07:44 PM	#25
bcontractor Registered User Join Date: Sep 2014 Location: santa rosa,california Posts: 65	Re: Sail panels, deluxe heater control , & more I will take the glove box door ,shipped to 95407 __________________ There is more then one way to do it right !

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.