The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Paint & Bodywork

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-29-2020, 01:05 PM   #1
Bullett
Registered User
 
Join Date: Dec 2013
Location: Fairfield, Maine
Posts: 302
Clear coat truck prep

I want to scuff my truck, touch in a couple small spots and then put a coat of new clear coat over the whole truck. My question is, what is the safest and finest grit I can use to scuff the truck down with that the new clear will adhere to. Thanks.
Bullett is offline   Reply With Quote
Old 03-29-2020, 02:22 PM   #2
trixter99
I have no time for this
 
trixter99's Avatar
 
Join Date: Dec 2002
Location: Fort St John B.C. CANADA
Posts: 434
Re: Clear coat truck prep

I’ve dry sanded with 900 on a orbital and had no issues. Wet with 1000 will be fine as well. Is your truck clear coated already?
__________________
1986 Chevy short box ( PROJECT )
1994 Chevy Blazer lifted 6"
2009 Gmc 2500 HD
1999 Hugger orange Camaro SS
2007 BMW X5 Sport
trixter99 is offline   Reply With Quote
Old 03-29-2020, 03:11 PM   #3
Bullett
Registered User
 
Join Date: Dec 2013
Location: Fairfield, Maine
Posts: 302
Re: Clear coat truck prep

Yes, had a well known body shop put a new b/c paint job on it a couple years back. Even though I specifically asked to leave it as it came out of the spray gun, that’s not what I got. He wet sanded and buffed it. It looks great in the shade. In the sun, there are deep buffing swirls all over the truck. I do body work and paint as a hobby, but was laid up at the time with health issues so I had him do it. I’ve since tried every which way and every suggestion to try and remove the swirls. They just aren’t coming out. I want to scuff and put one good coat of clear over it and be done. I can paint, it will look good. I have just never done this and wasn’t sure what I could get away with for wet sanding and still have enough tooth for the new clear to adhere to.
Bullett is offline   Reply With Quote
Old 04-01-2020, 10:25 PM   #4
Myself
Registered User
 
Join Date: Oct 2005
Location: Northern Arkansas
Posts: 1,126
Re: Clear coat truck prep

Why not just cut it with 1000 grit and polish it back out? There should be plenty of clear on to do it.
Myself is offline   Reply With Quote
Old 04-02-2020, 12:01 PM   #5
MDPotter
Senior Member
 
MDPotter's Avatar
 
Join Date: Aug 2018
Location: Western Colorado
Posts: 1,165
Re: Clear coat truck prep

You should look at the tech sheet for whatever clear you're planning to use. If it were me, I would use SPI Universal Clear and sand with 600 prior. I know it costs more, but you should do two coats. That will give you peace of mind that you have good mil thickness and in case you ever want to cut & buff yourself you have enough.
__________________
1964 Chevy C10 - Gen IV 5.3 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=768632
1968 GMC C15 - Gen III 6.0 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=772047
1969 Chevy C10 - Restoration http://67-72chevytrucks.com/vboard/s...d.php?t=809184
1978 Chevy Scottsdale K20
1993 Chevy C1500 - 5.3/T56 swapped
2008 Silverado Duramax
MDPotter is offline   Reply With Quote
Old 04-02-2020, 12:19 PM   #6
67swb72klb
Registered User
 
67swb72klb's Avatar
 
Join Date: Dec 2010
Location: livingston co.mi
Posts: 2,447
Re: Clear coat truck prep

I would try buffing again maybe go with a more aggressive compound or pad.
Make sure you change pads when you go to the lighter compounds
Good luck
__________________
California 65 GTO---Texas 64 burb 283 ---Oklahoma 67 CST SWB BBW wood bed 327 2004r---New Mexico 72 k10 350 350 auto---Georga 72 short step project
67swb72klb is offline   Reply With Quote
Old 04-02-2020, 10:00 PM   #7
Skymortar
Registered User
 
Join Date: Dec 2019
Location: Stevensville Md.
Posts: 116
Re: Clear coat truck prep

Wet DA it with 3m 300 grit trizact and buff it again
Skymortar is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:16 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com