I think I've decided on a build "theme" - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1971blazerguy · 01-30-2013, 05:04 PM

ok thanyou very much that helps me out to put hte torsion boxes on thx for the help

99-LS1-SS · 02-19-2013, 07:58 PM

Finally, another update. This is a mix of some older pictures that I just got and 2 new pictures.

First with the older pictures.
These are when the inside of the tub was being prepped and painted.

And here is where it is at today. The motor and transmission are in, the wheels are on and the assembly process is underway.

They said it should be done by early summer. I'm crossing my fingers.

Low Elco · 02-19-2013, 08:47 PM

Oooooooweeeee! Can't wait. Excited for ya!
Posted via Mobile Device

darkhorse970 · 02-19-2013, 09:06 PM

I really like that orange!

Fw190d9 · 02-20-2013, 12:40 AM

You might consider cutting holes in that crossmember for the exhaust. Reinforce with some 4" pipe. It will help to keep the exhaust system for that 502 up so it wont be draggin. I just did a 502 install and ran 3" full length.

99-LS1-SS · 02-20-2013, 12:43 AM

Got any pictures or a link?
Posted via Mobile Device

Fw190d9 · 02-20-2013, 12:51 AM

I did it on a 4x4 blazer so no crossmember to deal with. However, its been done lots of times on here when people lower their trucks and blazers to gain extra ground clearance for the exhaust. I think CPP sells one with holes already in it. Here is a link to a thread on the subject.

http://67-72chevytrucks.com/vboard/s....php?p=3250018

Evan Q.

99-LS1-SS · 02-21-2013, 01:14 PM

I got a few more pictures today. It has been moved up into the assembly section of their building. The tub braces have been cut out and the paint fixed where they were welded in. The pictures are a little better than the last group.
They've ordered the Dakota Digital dash cluster, a pully/serpentine system for the engine and a wiring harness. I will post pics of those if/when I get them.

fxdxharley · 02-21-2013, 01:44 PM

She is looking Awsome!!!

what the wheel and tire package? specs?

72blaz · 02-21-2013, 03:50 PM

Looking extremely Sharp! I'd be interested in knowing what steering column and where they got it.. I've got to get one here in the next month.

99-LS1-SS · 02-21-2013, 04:31 PM

Quote:

Originally Posted by fxdxharley

She is looking Awsome!!!

what the wheel and tire package? specs?

Thanks. The wheels are Coys C5's, 18x8 and 18x9.5 and the tires are Nitto NT555's, 265/50ZR18 and 295/45ZR18.

Quote:

Originally Posted by 72blaz

Looking extremely Sharp! I'd be interested in knowing what steering column and where they got it.. I've got to get one here in the next month.

I got the steering column from LMC but the box says it was CCP steering wheel. Here is the page that I got it from on the LMC site.
http://www.lmctruck.com/icatalog/CB/full.aspx?Page=127

Wasted Income · 02-22-2013, 11:12 AM

Lookin awesome!

99-LS1-SS · 03-14-2013, 09:26 AM

I have another update. The pulley system, Vintage Air, headers and wiring harness have arrived. Some of the new stuff has already been put on the Blazer. The assembly is in full motion...and I'm very anxious to get this thing done and driving. I know I'm worrying the mess out of the shop but, I'm excited.

Well, here are a few pictures as of this morning.

Wasted Income · 03-14-2013, 10:41 AM

Man that is looking awesome.

That accessory drive setup = $$$$

Low Elco · 03-14-2013, 11:18 AM

They sure seem to be doing nice work in a timely fashion. Who is the shop?
Posted via Mobile Device

99-LS1-SS · 03-14-2013, 02:33 PM

Quote:

Originally Posted by Wasted Income

Man that is looking awesome.

That accessory drive setup = $$$$

Thanks! The accessory setup came from here

Quote:

Originally Posted by Low Elco

They sure seem to be doing nice work in a timely fashion. Who is the shop?
Posted via Mobile Device

Yeah, I think they are working at a good pace. The bills can vouch for that. The shop is http://keithsrestoration.com/ in Mocksville, NC. He's a standup guy and his guys turn out quality work. He isn't cheap though.
Posted via Mobile Device

YBNORML · 03-14-2013, 03:41 PM

Quote:

Originally Posted by 99-LS1-SS

Thanks! The accessory setup came from here

Yeah, I think they are working at a good pace. The bills can vouch for that. The shop is http://keithsrestoration.com/ in Mocksville, NC. He's a standup guy and his guys turn out quality work. He isn't cheap though.
Posted via Mobile Device

You get what you pay for! And from what I can see, you must be paying a lot. She's coming along nicely. Gonna be wicked when she's done.
Posted via Mobile Device

99-LS1-SS · 03-21-2013, 04:40 PM

Went and checked on the Blazer today. Since they aren't as good at taking pictures as I want them to be I snapped a few. The picture quality isn't too great because they were taken with my phone but, you get the idea. They've installed the AC and they're currently wiring the transmission. They are going to wire everything in the dash and work out from there.

99-LS1-SS · 03-21-2013, 08:33 PM

Shameless bump.

JayDubBlazer · 03-21-2013, 10:18 PM

now watching

**Tom Vogel** · 03-21-2013, 10:58 PM

Awesome. Perfect color!

Lol... My color. Love to see it parked next to my Jimmy. Wouldn't it be cool if everyone on this board lived on the same block?
Posted via Mobile Device

99-LS1-SS · 03-22-2013, 07:48 AM

Quote:

Originally Posted by Tom Vogel

Awesome. Perfect color!

Lol... My color. Love to see it parked next to my Jimmy. Wouldn't it be cool if everyone on this board lived on the same block?
Posted via Mobile Device

Got any pictures of your Jimmy?

**Tom Vogel** · 03-22-2013, 10:13 AM

No really good ones yet. Still in the wiring stage.

Wasted Income · 03-22-2013, 10:53 AM

Tom, what vents are those in your hood? I've been looking for something like that to use as a heat extractor for mine.

99-LS1-SS · 03-22-2013, 01:19 PM

Quote:

Originally Posted by Tom Vogel

No really good ones yet. Still in the wiring stage.

That looks good!

01-30-2013, 05:04 PM	#226
1971blazerguy Registered User Join Date: Aug 2009 Location: windsor ontario Posts: 25	Re: I think I've decided on a build "theme" ok thanyou very much that helps me out to put hte torsion boxes on thx for the help

02-19-2013, 07:58 PM	#227
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: I think I've decided on a build "theme" Finally, another update. This is a mix of some older pictures that I just got and 2 new pictures. First with the older pictures. These are when the inside of the tub was being prepped and painted. And here is where it is at today. The motor and transmission are in, the wheels are on and the assembly process is underway. They said it should be done by early summer. I'm crossing my fingers. __________________ My 1972 2WD Blazer build 1984 K10 beater truck

02-19-2013, 08:47 PM	#228
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: I think I've decided on a build "theme" Oooooooweeeee! Can't wait. Excited for ya! Posted via Mobile Device __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

02-19-2013, 09:06 PM	#229
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,103	Re: I think I've decided on a build "theme" I really like that orange! __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

02-20-2013, 12:40 AM	#230
Fw190d9 Registered User Join Date: Jan 2012 Location: Seguin Texas Posts: 160	Re: I think I've decided on a build "theme" You might consider cutting holes in that crossmember for the exhaust. Reinforce with some 4" pipe. It will help to keep the exhaust system for that 502 up so it wont be draggin. I just did a 502 install and ran 3" full length.

02-20-2013, 12:43 AM	#231
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: I think I've decided on a build "theme" Got any pictures or a link? Posted via Mobile Device __________________ My 1972 2WD Blazer build 1984 K10 beater truck

02-20-2013, 12:51 AM	#232
Fw190d9 Registered User Join Date: Jan 2012 Location: Seguin Texas Posts: 160	Re: I think I've decided on a build "theme" I did it on a 4x4 blazer so no crossmember to deal with. However, its been done lots of times on here when people lower their trucks and blazers to gain extra ground clearance for the exhaust. I think CPP sells one with holes already in it. Here is a link to a thread on the subject. http://67-72chevytrucks.com/vboard/s....php?p=3250018 Evan Q.

02-21-2013, 01:14 PM	#233
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: I think I've decided on a build "theme" I got a few more pictures today. It has been moved up into the assembly section of their building. The tub braces have been cut out and the paint fixed where they were welded in. The pictures are a little better than the last group. They've ordered the Dakota Digital dash cluster, a pully/serpentine system for the engine and a wiring harness. I will post pics of those if/when I get them. __________________ My 1972 2WD Blazer build 1984 K10 beater truck

02-21-2013, 01:44 PM	#234
fxdxharley Just a nother gear head Join Date: Jul 2009 Location: Barrington NH Posts: 501	Re: I think I've decided on a build "theme" She is looking Awsome!!! what the wheel and tire package? specs? __________________ 2013 HD FLHX 2000 chevy 2500 6.0l 4x4 3dr 2000 harley fxdx 71 Jimmy 4x4- future crawler/ woods rig 71 blazer (C4 2wd conv project) http://67-72chevytrucks.com/vboard/s...d.php?t=523589

02-21-2013, 03:50 PM	#235
72blaz Registered User Join Date: Dec 2012 Location: Trinity, Florida Posts: 104	Re: I think I've decided on a build "theme" Looking extremely Sharp! I'd be interested in knowing what steering column and where they got it.. I've got to get one here in the next month. __________________ 1972 Chevy Blazer Check out my build: http://67-72chevytrucks.com/vboard/s...d.php?t=560741

02-22-2013, 11:12 AM	#237
Wasted Income Boosted Member Join Date: May 2002 Location: Mackinaw, IL Posts: 2,200	Re: I think I've decided on a build "theme" Lookin awesome! __________________ 1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2016 Ford Explorer Sport - Twin Turbskis 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards *TURBO ALL THE THINGS!!*

03-14-2013, 09:26 AM	#238
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: I think I've decided on a build "theme" I have another update. The pulley system, Vintage Air, headers and wiring harness have arrived. Some of the new stuff has already been put on the Blazer. The assembly is in full motion...and I'm very anxious to get this thing done and driving. I know I'm worrying the mess out of the shop but, I'm excited. Well, here are a few pictures as of this morning. __________________ My 1972 2WD Blazer build 1984 K10 beater truck

03-14-2013, 10:41 AM	#239
Wasted Income Boosted Member Join Date: May 2002 Location: Mackinaw, IL Posts: 2,200	Re: I think I've decided on a build "theme" Man that is looking awesome. That accessory drive setup = $$$$ __________________ 1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2016 Ford Explorer Sport - Twin Turbskis 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards *TURBO ALL THE THINGS!!*

03-14-2013, 11:18 AM	#240
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: I think I've decided on a build "theme" They sure seem to be doing nice work in a timely fashion. Who is the shop? Posted via Mobile Device __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

03-21-2013, 04:40 PM	#243
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: I think I've decided on a build "theme" Went and checked on the Blazer today. Since they aren't as good at taking pictures as I want them to be I snapped a few. The picture quality isn't too great because they were taken with my phone but, you get the idea. They've installed the AC and they're currently wiring the transmission. They are going to wire everything in the dash and work out from there. __________________ My 1972 2WD Blazer build 1984 K10 beater truck



Register or Log In To remove these advertisements.

03-21-2013, 08:33 PM	#244
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: I think I've decided on a build "theme" Shameless bump. __________________ My 1972 2WD Blazer build 1984 K10 beater truck

03-21-2013, 10:18 PM	#245
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,885	Re: I think I've decided on a build "theme" now watching __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT

03-21-2013, 10:58 PM	#246
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,563	Re: I think I've decided on a build "theme" Awesome. Perfect color! Lol... My color. Love to see it parked next to my Jimmy. Wouldn't it be cool if everyone on this board lived on the same block? Posted via Mobile Device

03-22-2013, 10:13 AM	#248
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,563	Re: I think I've decided on a build "theme" No really good ones yet. Still in the wiring stage. Attached Images

03-22-2013, 10:53 AM	#249
Wasted Income Boosted Member Join Date: May 2002 Location: Mackinaw, IL Posts: 2,200	Re: I think I've decided on a build "theme" Tom, what vents are those in your hood? I've been looking for something like that to use as a heat extractor for mine. __________________ 1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2016 Ford Explorer Sport - Twin Turbskis 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards *TURBO ALL THE THINGS!!*

Register or Log In To remove these advertisements.