Pops 72 cheyenne dropmember build - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**superflysteiny** · 02-09-2011, 02:29 AM

Quote:

Originally Posted by youngrodder

Are those Intros? What are the specs on those sweet wheels?

Marc

No there billetspecialties
Posted via Mobile Device

**superflysteiny** · 02-09-2011, 02:41 AM

Ok I will try to answer all of your guys questions. The wheels are 22by 10 in the rear. They are full offset so the rear end will have to be narrowed. No big deal. Because the rear end needs to be narrowed I did not want to have any issues with the 4 link hitting the wheels once the rear was narrowed. Money or price had nothing to do with going 4 link verse trailing arms. As far as the floor being cut yes it will need to be cut I will cut most of the center of the bed out. Also as far as bolt in verse weld in it really did not matter to me. Nate sent me the bolt in so that's what I went with. The kit is first class and I don't think it matters bolt verse weld in this case. The rear of the truck is as sold as any weld in notch I have ever done on one of these trucks mostly due to the design. I hope that helps guys. Thanks for checking out the thread more pics to come tomorrow.

Posted via Mobile Device

**67cheby** · 02-09-2011, 11:20 AM

it's TOMORROW...just SAYIN

mooseknuckles · 02-09-2011, 11:26 AM

don't cut the floor....raise it!

**superflysteiny** · 02-09-2011, 03:21 PM

I really dont like the look of raised floors. I will think about it. I think it just looks wierd I dont know. I will cross that brige when I get there.

**superflysteiny** · 02-10-2011, 12:29 PM

Here is the update: the truck frame is at powder coat. Satin Black is the color. I will get it next thursday. Then I will get it back together. The rear end will be narrowed 2 inched each side. So I am making some good progress. Here are some pics with the frame laid out.

+

**Glorybound13** · 02-10-2011, 12:37 PM

Looks ridiculous already.

**67cheby** · 02-10-2011, 12:50 PM

oh....thats SEXY

**superflysteiny** · 02-10-2011, 01:14 PM

Thanks guys I think this truck is going to sweet
Posted via Mobile Device

heymoe · 02-10-2011, 01:33 PM

O yes, so nice. Can you finish mine...... hahahahah

VA72C10 · 02-10-2011, 02:19 PM

Going to be SICK!

butternut1972 · 02-10-2011, 03:13 PM

Those wheels are dead sexy! that is going to be a killer truck.

**superflysteiny** · 02-10-2011, 04:54 PM

Thanks guys
I really like these wheels. They are a little on the expensive side but the milling and polish is darn near flawless. Can't wait to see them up against the black paint.
Posted via Mobile Device

**67cheby** · 02-10-2011, 05:12 PM

are they coated with anything ?? i bought some Wizards coating to put on mine when they come in from Budnik, it is supposed to help keep them polished ....i hope it works

1stchevy · 02-10-2011, 06:37 PM

Looking good! You move fast.

**Hart_Rod** · 02-10-2011, 07:03 PM

I wish I could work as fast as you.............

. Great build!

72BlckButy · 02-10-2011, 10:50 PM

Looking good!

jmedero · 02-11-2011, 12:00 AM

Super cool build dude. I can't wait to see what you have in mind for that burb in the background.
Posted via Mobile Device

**superflysteiny** · 02-11-2011, 01:36 PM

Quote:

Originally Posted by 67cheby

are they coated with anything ?? i bought some Wizards coating to put on mine when they come in from Budnik, it is supposed to help keep them polished ....i hope it works

That wizard polish protector works great. I will be using the same product. I have the rear end at the machine shop being shortened 2 inchs on each side. I can't respline the axles because they are typical chevy axles and they narrow after the spline so I order new axles today. I am going to be out of town for a week so there will be no updates after tomorrow. Also I tore the motor apart and it is not what the guy said it is so I am putting a 500 hp 400 small block chevy in it with forged crank pistons and rods. I am planning on it being chevy orange want to maintain some the stock look in the engine compartment. I will shave the fire wall next Friday when I get home. I should have the frame back together in 2 weeks with the motor. Then the bed will go on and all new stainless hard lines will go in for the brakes. Glad you guys are liking the build.

Posted via Mobile Device

**superflysteiny** · 02-11-2011, 01:43 PM

Quote:

Originally Posted by jmedero

Super cool build dude. I can't wait to see what you have in mind for that burb in the background.
Posted via Mobile Device

The bur will most likely go to bob grant were it will be turned into a tahoe
Posted via Mobile Device

**67cheby** · 02-11-2011, 01:50 PM

i am glad to hear that the Wizard works well , thank you

**youngrodder** · 02-11-2011, 03:06 PM

What wizard product do you use? Is it the "Power Seal" prudct? I went on their web site but was not sure what product you were intending on using.

How about for polishing dull billet? What would you recommend? I have some billet engine accessory brackets and pulleys that need a good polishing.

**67cheby** · 02-11-2011, 04:41 PM

Metal Renew if they are bad oxidized..... power seal once you get them polished up

*R.A.D* · 02-11-2011, 08:45 PM

looking good as always

VA72C10 · 02-11-2011, 10:53 PM

Sorry to hear about the engine. But the replacement sounds even better.

How are you planning to shave the firewall? Symettrical? Shave the rain gutter? Cap it 90 or at 45 degrees?

And keep us up to speed if something happens with the burb (to be tahoe)

02-09-2011, 02:41 AM	#127
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build Ok I will try to answer all of your guys questions. The wheels are 22by 10 in the rear. They are full offset so the rear end will have to be narrowed. No big deal. Because the rear end needs to be narrowed I did not want to have any issues with the 4 link hitting the wheels once the rear was narrowed. Money or price had nothing to do with going 4 link verse trailing arms. As far as the floor being cut yes it will need to be cut I will cut most of the center of the bed out. Also as far as bolt in verse weld in it really did not matter to me. Nate sent me the bolt in so that's what I went with. The kit is first class and I don't think it matters bolt verse weld in this case. The rear of the truck is as sold as any weld in notch I have ever done on one of these trucks mostly due to the design. I hope that helps guys. Thanks for checking out the thread more pics to come tomorrow. Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

02-09-2011, 11:20 AM	#128
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Pops 72 cheyenne dropmember build it's TOMORROW...just SAYIN __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-09-2011, 11:26 AM	#129
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: Pops 72 cheyenne dropmember build don't cut the floor....raise it! __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

02-09-2011, 03:21 PM	#130
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build I really dont like the look of raised floors. I will think about it. I think it just looks wierd I dont know. I will cross that brige when I get there. __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

02-10-2011, 12:29 PM	#131
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build Here is the update: the truck frame is at powder coat. Satin Black is the color. I will get it next thursday. Then I will get it back together. The rear end will be narrowed 2 inched each side. So I am making some good progress. Here are some pics with the frame laid out. + __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

02-10-2011, 12:37 PM	#132
Glorybound13 Junior Member Join Date: Dec 2010 Location: Dallas, NC Posts: 70	Re: Pops 72 cheyenne dropmember build Looks ridiculous already.

02-10-2011, 12:50 PM	#133
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Pops 72 cheyenne dropmember build oh....thats SEXY __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-10-2011, 01:14 PM	#134
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build Thanks guys I think this truck is going to sweet Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

02-10-2011, 01:33 PM	#135
heymoe Registered User Join Date: Mar 2009 Location: Lebanon, Ohio Posts: 324	Re: Pops 72 cheyenne dropmember build O yes, so nice. Can you finish mine...... hahahahah __________________ My build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=371235

02-10-2011, 02:19 PM	#136
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Pops 72 cheyenne dropmember build Going to be SICK! __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-10-2011, 03:13 PM	#137
butternut1972 Registered User Join Date: May 2009 Location: longview,wa Posts: 1,094	Re: Pops 72 cheyenne dropmember build Those wheels are dead sexy! that is going to be a killer truck. __________________ 1972 GMC (PROJECT LONG OVERDUE) 1998 SWB 4WD

02-10-2011, 04:54 PM	#138
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build Thanks guys I really like these wheels. They are a little on the expensive side but the milling and polish is darn near flawless. Can't wait to see them up against the black paint. Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell Last edited by superflysteiny; 02-10-2011 at 04:55 PM.

02-10-2011, 05:12 PM	#139
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Pops 72 cheyenne dropmember build are they coated with anything ?? i bought some Wizards coating to put on mine when they come in from Budnik, it is supposed to help keep them polished ....i hope it works __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-10-2011, 06:37 PM	#140
1stchevy Registered User Join Date: Jan 2010 Location: Randleman, NC Posts: 785	Re: Pops 72 cheyenne dropmember build Looking good! You move fast.

02-10-2011, 07:03 PM	#141
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,827	Re: Pops 72 cheyenne dropmember build I wish I could work as fast as you.............. Great build! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3



Register or Log In To remove these advertisements.

02-10-2011, 10:50 PM	#142
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Pops 72 cheyenne dropmember build Looking good! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

02-11-2011, 12:00 AM	#143
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: Pops 72 cheyenne dropmember build Super cool build dude. I can't wait to see what you have in mind for that burb in the background. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

02-11-2011, 01:50 PM	#146
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Pops 72 cheyenne dropmember build i am glad to hear that the Wizard works well , thank you __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-11-2011, 03:06 PM	#147
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,752	Re: Pops 72 cheyenne dropmember build What wizard product do you use? Is it the "Power Seal" prudct? I went on their web site but was not sure what product you were intending on using. How about for polishing dull billet? What would you recommend? I have some billet engine accessory brackets and pulleys that need a good polishing. __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

02-11-2011, 04:41 PM	#148
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Pops 72 cheyenne dropmember build Metal Renew if they are bad oxidized..... power seal once you get them polished up __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-11-2011, 08:45 PM	#149
R.A.D Account Suspended Join Date: Aug 2010 Location: richmond ill Posts: 376	Re: Pops 72 cheyenne dropmember build looking good as always

02-11-2011, 10:53 PM	#150
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Pops 72 cheyenne dropmember build Sorry to hear about the engine. But the replacement sounds even better. How are you planning to shave the firewall? Symettrical? Shave the rain gutter? Cap it 90 or at 45 degrees? And keep us up to speed if something happens with the burb (to be tahoe) __________________ Looking for a 67-72 swb or blazer project in or around VA.

Register or Log In To remove these advertisements.