|
05-21-2002, 10:20 PM
|
#1 |
|
Formerly yellow72custom
Join Date: May 2001
Location: Austin, TX
Posts: 7,531
|
67-68 cab on my 72?
I asked this question before, and got mixed answers. I need a new cab for my '72, and i have found several cabs from '67-68 trucks in pretty good shape. Besides the parking brake, what are the differences between them? I also heard the heater arrangements are different, maybe it was the holes in the firewall. Will the wiring plug in to my '72 dash, engine harness, and other lights?
------------------ Lucas "Another proud owner of one of the coolest trucks ever built" drop_shift@hotmail.com My Daily-Driver: '72 Chevy LWB Custom/10. Rebuilt 350, roughly 300 HP thanks to a 204/214 duration cam, Edelbrock Performer intake and 1406 carb, headers, and 40 seires Flowmaster mufflers. Ochre with a white top. Lots of fun  .
__________________
'72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg |
|
|
|
05-21-2002, 10:27 PM
|
#2 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
The throttle is not the same, '70 and older has a rod instead of cable. HTe hole for the peadle is not the same.
The heater is not the same either. '72 has a vent in dvr door jamb, 70 and older do not. Holes for the rearview mirror will be drilled, and posably a raised mounting pad for it also. Some 67's had the small back window. All I can think of off the top of my head. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. E-mail longhornmail@yahoo.com My name is Andy...not Randy...I'm in Ohio...Not Illinois...close enough? Columbus Ohio |
|
|
|
|
05-21-2002, 10:31 PM
|
#3 |
|
Formerly yellow72custom
Join Date: May 2001
Location: Austin, TX
Posts: 7,531
|
How hard would it be to change that, if i have access to a welder? Just a few holes to drill or what?
__________________
'72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
