4x4 blazer roll bars - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Skyetone · 05-18-2002, 12:09 PM

I was gonna search but don't see that as an option. Does anyone have pix of roll bars in there 1st gen blazers? Need to scan pix of my old 2wd's now

Mike C · 05-18-2002, 09:57 PM

Smittybuilt 4 pt with cage kit.

------------------
70 GMC 3/4 ton Sierra Grande 402/TH400
72 Jimmy 4WD 4spd 4" & 35's
64 Corvette Coupe
68 Camaro 'vert TPI & TH700
69 Z/28 355 12.6's @110
72 Datsun 240Z-ol' reliable

Skyetone · 05-19-2002, 12:25 PM

I will build my own soon. The hell with ****tybuilt.... I am looking for stock for now.I have one and am trying to see if I want to build on it or scrap the whole thing later.

------------------
I am back in chevy country and have need for a map again...

Skyetone · 05-19-2002, 12:27 PM

oh now I see a picture thats a little diferent. My rear kickers go behind the wheelwells like that one. Is that stock location or aftermarket?

Mike C · 05-20-2002, 06:53 AM

That is the Smittybuilt "stock" location. It is built with 2" tubing and I couldn't finde anybody locally to bend 2" for cages, just 1 1/2 or 1 3/4. IMO, the 2" is minimum size as the smaller ones are too spindly looking. The Smittybuilt bar was reasonably priced I thought and went in in a day. That picture was shot in 1990 right after I put the bar in and re-did the interior.

bouncytruck · 05-20-2002, 10:35 AM

Here are pictures of the roll bar in my K-5. I don't know what brand it is since it was in the truck when I bought it. Unfortunately, someone welded it into place.

------------------
'69 K-5 Blazer - 350/TH350, 6" lift, 35" tires
Bothell, WA

Mike C · 05-20-2002, 02:47 PM

That's a Smittybuilt bar like mine, just without the cage conversion.

Skyetone · 05-20-2002, 06:25 PM

Cool I guess I have a smitty then. does the kicker neck down to fit in the hoop or does it stay 2" all the way up?

------------------
I am back in chevy country and have need for a map again...

Mike C · 05-21-2002, 07:02 AM

2" all the way.

Skyetone · 05-21-2002, 08:52 AM

cool thanx.... Lets see if this works...

How do I make this work as a pic? http://community.webshots.com/photo/36069164/36069360qWYoWv
------------------
I am back in chevy country and have need for a map again...

[This message has been edited by Skyetone (edited May 21, 2002).]

[This message has been edited by Skyetone (edited May 21, 2002).]

[This message has been edited by Skyetone (edited May 21, 2002).]

[This message has been edited by Skyetone (edited May 21, 2002).]

bouncytruck · 05-21-2002, 10:33 AM

Good to know I have a Smitty Built.

Here's how you add a image... Open the image (not the page that has the photo) in a new page, copy and paste the url (The one below is http://community.webshots.com/storag...qWYoWv_ph.jpg) into the message and add [img] [/img] around the url.

[img]address of the photo[/img]

------------------
'69 K-5 Blazer - 350/TH350, 6" lift, 35" tires
Bothell, WA

Skyetone · 05-21-2002, 05:27 PM

thats what i tried. I can't get a URL thats a JPG... How did you>?

------------------
I am back in chevy country and have need for a map again...

bouncytruck · 05-21-2002, 05:40 PM

Well, I'm on a Mac, so I click and hold on the image until a contextual menu comes up and then I goto "open image in new window." I assume your on a PC (like most of the world) and I believe that you can Right mouse click on an image and have it open in a new window or you can get the properties which will state the url of the image. Can someone on a PC confirm?

------------------
'69 K-5 Blazer - 350/TH350, 6" lift, 35" tires
Bothell, WA

05-18-2002, 12:09 PM	#1
Skyetone Registered User Join Date: May 2002 Location: SLC Utah Posts: 6	4x4 blazer roll bars I was gonna search but don't see that as an option. Does anyone have pix of roll bars in there 1st gen blazers? Need to scan pix of my old 2wd's now __________________ I am back in chevy country and have need for a map again...

05-18-2002, 09:57 PM	#2
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,709	Smittybuilt 4 pt with cage kit. ------------------ 70 GMC 3/4 ton Sierra Grande 402/TH400 72 Jimmy 4WD 4spd 4" & 35's 64 Corvette Coupe 68 Camaro 'vert TPI & TH700 69 Z/28 355 12.6's @110 72 Datsun 240Z-ol' reliable __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

05-19-2002, 12:25 PM	#3
Skyetone Registered User Join Date: May 2002 Location: SLC Utah Posts: 6	I will build my own soon. The hell with ****tybuilt.... I am looking for stock for now.I have one and am trying to see if I want to build on it or scrap the whole thing later. ------------------ I am back in chevy country and have need for a map again... __________________ I am back in chevy country and have need for a map again...

05-19-2002, 12:27 PM	#4
Skyetone Registered User Join Date: May 2002 Location: SLC Utah Posts: 6	oh now I see a picture thats a little diferent. My rear kickers go behind the wheelwells like that one. Is that stock location or aftermarket? __________________ I am back in chevy country and have need for a map again...

05-20-2002, 06:53 AM	#5
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,709	That is the Smittybuilt "stock" location. It is built with 2" tubing and I couldn't finde anybody locally to bend 2" for cages, just 1 1/2 or 1 3/4. IMO, the 2" is minimum size as the smaller ones are too spindly looking. The Smittybuilt bar was reasonably priced I thought and went in in a day. That picture was shot in 1990 right after I put the bar in and re-did the interior. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

05-20-2002, 10:35 AM	#6
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Here are pictures of the roll bar in my K-5. I don't know what brand it is since it was in the truck when I bought it. Unfortunately, someone welded it into place. ------------------ '69 K-5 Blazer - 350/TH350, 6" lift, 35" tires Bothell, WA __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

05-20-2002, 02:47 PM	#7
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,709	That's a Smittybuilt bar like mine, just without the cage conversion. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

05-20-2002, 06:25 PM	#8
Skyetone Registered User Join Date: May 2002 Location: SLC Utah Posts: 6	Cool I guess I have a smitty then. does the kicker neck down to fit in the hoop or does it stay 2" all the way up? ------------------ I am back in chevy country and have need for a map again... __________________ I am back in chevy country and have need for a map again...

05-21-2002, 07:02 AM	#9
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,709	2" all the way. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

05-21-2002, 08:52 AM	#10
Skyetone Registered User Join Date: May 2002 Location: SLC Utah Posts: 6	cool thanx.... Lets see if this works... How do I make this work as a pic? http://community.webshots.com/photo/36069164/36069360qWYoWv ------------------ I am back in chevy country and have need for a map again... [This message has been edited by Skyetone (edited May 21, 2002).] [This message has been edited by Skyetone (edited May 21, 2002).] [This message has been edited by Skyetone (edited May 21, 2002).] [This message has been edited by Skyetone (edited May 21, 2002).] __________________ I am back in chevy country and have need for a map again...

05-21-2002, 10:33 AM	#11
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Good to know I have a Smitty Built. Here's how you add a image... Open the image (not the page that has the photo) in a new page, copy and paste the url (The one below is http://community.webshots.com/storag...qWYoWv_ph.jpg) into the message and add [img] [/img] around the url. [img]address of the photo[/img] ------------------ '69 K-5 Blazer - 350/TH350, 6" lift, 35" tires Bothell, WA __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

05-21-2002, 05:27 PM	#12
Skyetone Registered User Join Date: May 2002 Location: SLC Utah Posts: 6	thats what i tried. I can't get a URL thats a JPG... How did you>? ------------------ I am back in chevy country and have need for a map again... __________________ I am back in chevy country and have need for a map again...

05-21-2002, 05:40 PM	#13
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Well, I'm on a Mac, so I click and hold on the image until a contextual menu comes up and then I goto "open image in new window." I assume your on a PC (like most of the world) and I believe that you can Right mouse click on an image and have it open in a new window or you can get the properties which will state the url of the image. Can someone on a PC confirm? ------------------ '69 K-5 Blazer - 350/TH350, 6" lift, 35" tires Bothell, WA __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.