For Sale: Billet Aluminum Dash Panels

[Ryan Hubbard]

Well Guys I am a little over whelmed with the response for right now. I showed these gauge panels to several of the restoration part shop and was told they were not interested. I am going to probably lean toward making one or two gauge layouts. I downloaded the info from Autometer but thanks Tony for posting the link. I will probably leave the gauge layout the same with five 2 1/16" holes and then two 5" (really 4 5/8") gauge holes. It takes time to modify and test the programs. Also like I said before my machine is loaded up right now with work. My main business is an engineering firm and right now I have some big contracts going on and have to travel extensively so I don't respond right away it is because I am either on a plane or unable to access the net. But I will post 3D model pictures and part numbers and pricing in a bit. Thanks for the interest and I will try my best to get the infor together as soon as possible. I also have my designer working on the glove box door and will post 3d models of this.

Shane,

I have a Fadal 40X20 4 axis machine. I have attached a picture of my machine shop.

[TonyJohnson]

Very cool shop! Thanks for taking the time to do this. The quality of your panels is sweet. Later, Tony

[Shane]

Originally Posted by Ryan Hubbard

Shane,

I have a Fadal 40X20 4 axis machine. I have attached a picture of my machine shop.

Good looking shop! I work for Haas (Sales Engineer).

[FormerMember]

I want three... willing to send paypal now.

Autometer gauges:
two 5" and and five 2 5/8"

Glove box doors would be sweet, too.

[70short/step]

I would Like one also. glove box door would br cool too!

[Musclerodz]

Ryan you have PM's.

Mike