OR Parting out 72 Suburban C10 402 TH400 - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**FRENCHBLUE72** · 08-05-2012, 07:41 PM

Have any gas tank sending unit wiring harness? I need the rubber 90 degree boot and about 4 or 5 inchs of wire with it?

**tll74** · 08-07-2012, 01:33 AM

You want the end that goes on the pin of the sending unit?

**FRENCHBLUE72** · 08-07-2012, 07:01 AM

That would be correct...

Areohbe · 08-07-2012, 08:30 PM

Do you still have the upper molding? I need the driver door only, but will buy all if needed.

bradway · 08-11-2012, 10:26 AM

Hi - do you still have the "71-72 gas pedal assy with TH400 switch and wiring to engine harness. 40.00"? If so, I want it and need it shipped to 99712.

**tll74** · 08-11-2012, 10:36 AM

Quote:

Originally Posted by bradway

Hi - do you still have the "71-72 gas pedal assy with TH400 switch and wiring to engine harness. 40.00"? If so, I want it and need it shipped to 99712.

Yes I do. 52.00 shipped. Thanks, Tom

**tll74** · 08-11-2012, 10:40 AM

Quote:

Originally Posted by FRENCHBLUE72

That would be correct...

I have it. 6.00 mailed.

Quote:

Originally Posted by Areohbe

Do you still have the upper molding? I need the driver door only, but will buy all if needed.

Answered this question in another tread.

xman · 08-15-2012, 07:45 AM

I was wondering if possible you might still have the track bar for the 1/2 coil spring rearend.
If so how much shipped to 60435

**FRENCHBLUE72** · 08-15-2012, 10:53 AM

ill take it how would you like payment?
Posted via Mobile Device

**tll74** · 08-17-2012, 01:13 AM

Quote:

Originally Posted by xman

I was wondering if possible you might still have the track bar for the 1/2 coil spring rearend.
If so how much shipped to 60435

Sure, I have a couple of them. 45.00 shipped

Quote:

Originally Posted by FRENCHBLUE72

ill take it how would you like payment?
Posted via Mobile Device

Paypal as personal and I'll mail it to you.

Thanks, Tom

xman · 08-17-2012, 09:09 AM

sounds good for the track bar $45.00 shipped
If you can pick out the best one for me
I dont have paypall so is money order Ok
Just PM me your info and I will get a MO sent out

**FRENCHBLUE72** · 08-17-2012, 09:56 AM

Sounds great..

**tll74** · 08-18-2012, 12:43 AM

Quote:

Originally Posted by xman

sounds good for the track bar $45.00 shipped
If you can pick out the best one for me
I dont have paypall so is money order Ok
Just PM me your info and I will get a MO sent out

PM sent

Quote:

Originally Posted by FRENCHBLUE72

Sounds great..

PM sent

SLH · 08-26-2012, 01:34 AM

Do you have any complete headliner trim and rear A/C. If you do how much with shipping to 93312.
Posted via Mobile Device

**tll74** · 08-27-2012, 08:11 PM

Quote:

Originally Posted by SLH

Do you have any complete headliner trim and rear A/C. If you do how much with shipping to 93312.
Posted via Mobile Device

65.00 shipped on the bows and 235.00 shipped on the rear AC conversion. The big cover will be oversize and ship separate. Thanks, Tom

**hilljob26** · 08-27-2012, 09:27 PM

im looking for a nice 72 grill..centersection and surround,,,really need a nice surround..the one on that 4x4 sub looks like it would work..what would shipping run to 67401

**tll74** · 08-28-2012, 02:07 AM

Quote:

Originally Posted by hilljob26

im looking for a nice 72 grill..centersection and surround,,,really need a nice surround..the one on that 4x4 sub looks like it would work..what would shipping run to 67401

The shell is damaged around the RH headlamp. The insert is on hold for a future build. Thanks, Tom

SLH · 08-28-2012, 08:45 AM

Quote:

Originally Posted by tll74

65.00 shipped on the bows and 235.00 shipped on the rear AC conversion. The big cover will be oversize and ship separate. Thanks, Tom

Can you send me Pictures of everything? Thanks

**hilljob26** · 08-28-2012, 11:05 AM

ok,,thanx anyway

capev86 · 10-01-2012, 10:26 PM

did you save the mounting bracket for the dome light from this truck? want a blue one to add a 2nd overhead light to my rig. also take any extra dome lamp harness you can spare.

**tll74** · 10-09-2012, 12:24 AM

Quote:

Originally Posted by capev86

did you save the mounting bracket for the dome light from this truck? want a blue one to add a 2nd overhead light to my rig. also take any extra dome lamp harness you can spare.

Sorry, I scrapped the tub. Thanks, Tom

Topless72 · 10-09-2012, 02:16 AM

Im looking for the lower tailgate hinges that bolt into the bottom of the gate and the body. How much to ship to 50161. Maxwell Iowa
Thanks, Todd

silvara · 10-09-2012, 05:34 PM

im interested in the upper tailgate. is it in good shape rust wise?? mine is in pretty bad shape. how much for it if its still good and how much is shipping to south houston tx 77587

**tll74** · 10-10-2012, 12:51 AM

Quote:

Originally Posted by Topless72

Im looking for the lower tailgate hinges that bolt into the bottom of the gate and the body. How much to ship to 50161. Maxwell Iowa
Thanks, Todd

Todd, I have the hinges. I'll get you a cost shipped Wednesday.

Quote:

Originally Posted by silvara

im interested in the upper tailgate. is it in good shape rust wise?? mine is in pretty bad shape. how much for it if its still good and how much is shipping to south houston tx 77587

Sorry, the the upper gate is rusted out.

Thanks, Tom

sunk99 · 10-10-2012, 09:42 AM

Is the hatch key cylinder and button w/key and the rear rh sill plate still available?
Posted via Mobile Device

08-05-2012, 07:41 PM	#201
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Parting out 72 Suburban C10 402 TH400 Have any gas tank sending unit wiring harness? I need the rubber 90 degree boot and about 4 or 5 inchs of wire with it? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-07-2012, 01:33 AM	#202
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 Suburban C10 402 TH400 You want the end that goes on the pin of the sending unit? __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

08-07-2012, 07:01 AM	#203
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Parting out 72 Suburban C10 402 TH400 That would be correct... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-07-2012, 08:30 PM	#204
Areohbe Registered User Join Date: Sep 2011 Location: Southern California Posts: 54	Re: Parting out 72 Suburban C10 402 TH400 Do you still have the upper molding? I need the driver door only, but will buy all if needed.

08-11-2012, 10:26 AM	#205
bradway Registered User Join Date: Aug 2009 Location: Fairbanks, Alaska Posts: 4	Re: Parting out 72 Suburban C10 402 TH400 Hi - do you still have the "71-72 gas pedal assy with TH400 switch and wiring to engine harness. 40.00"? If so, I want it and need it shipped to 99712.

08-15-2012, 07:45 AM	#208
xman Registered User Join Date: Mar 2009 Location: Channahon, IL Posts: 198	Re: Parting out 72 Suburban C10 402 TH400 I was wondering if possible you might still have the track bar for the 1/2 coil spring rearend. If so how much shipped to 60435

08-15-2012, 10:53 AM	#209
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Parting out 72 Suburban C10 402 TH400 ill take it how would you like payment? Posted via Mobile Device __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-17-2012, 09:09 AM	#211
xman Registered User Join Date: Mar 2009 Location: Channahon, IL Posts: 198	Re: Parting out 72 Suburban C10 402 TH400 sounds good for the track bar $45.00 shipped If you can pick out the best one for me I dont have paypall so is money order Ok Just PM me your info and I will get a MO sent out

08-17-2012, 09:56 AM	#212
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Parting out 72 Suburban C10 402 TH400 Sounds great.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-26-2012, 01:34 AM	#214
SLH Registered User Join Date: Jul 2012 Location: Bakersfield CA Posts: 13	Re: Parting out 72 Suburban C10 402 TH400 Do you have any complete headliner trim and rear A/C. If you do how much with shipping to 93312. Posted via Mobile Device

08-27-2012, 09:27 PM	#216
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: Parting out 72 Suburban C10 402 TH400 im looking for a nice 72 grill..centersection and surround,,,really need a nice surround..the one on that 4x4 sub looks like it would work..what would shipping run to 67401 __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

08-28-2012, 11:05 AM	#219
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: Parting out 72 Suburban C10 402 TH400 ok,,thanx anyway __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

10-01-2012, 10:26 PM	#220
capev86 Registered User Join Date: May 2009 Location: Eliot, Maine Posts: 1,314	Re: Parting out 72 Suburban C10 402 TH400 did you save the mounting bracket for the dome light from this truck? want a blue one to add a 2nd overhead light to my rig. also take any extra dome lamp harness you can spare.

10-09-2012, 02:16 AM	#222
Topless72 Registered User Join Date: Jan 2012 Location: Maxwell, Iowa Posts: 20	Re: Parting out 72 Suburban C10 402 TH400 Im looking for the lower tailgate hinges that bolt into the bottom of the gate and the body. How much to ship to 50161. Maxwell Iowa Thanks, Todd

10-09-2012, 05:34 PM	#223
silvara Registered User Join Date: May 2012 Location: South Houston Posts: 7	Re: Parting out 72 Suburban C10 402 TH400 im interested in the upper tailgate. is it in good shape rust wise?? mine is in pretty bad shape. how much for it if its still good and how much is shipping to south houston tx 77587



Register or Log In To remove these advertisements.

10-10-2012, 09:42 AM	#225
sunk99 Registered User Join Date: Sep 2011 Location: Knoxville TN Posts: 399	Re: Parting out 72 Suburban C10 402 TH400 Is the hatch key cylinder and button w/key and the rear rh sill plate still available? Posted via Mobile Device

Register or Log In To remove these advertisements.