What did you do to your truck today.The 3rd chapter - Page 158 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ghackett1** · 06-11-2023, 09:38 AM

Quote:

Originally Posted by zicc1835

nothing to my truck today ...but I went to a local car show and saw this 69 owner did the LS swap nice truck ...oh

and I took my 48 Pontiac and took Peoples choice award

Looks like a great car show! Thx for pics!

**'68OrangeSunshine** · 06-11-2023, 06:40 PM

Quote:

Originally Posted by zicc1835

Yes sir:

Cool.

OregonNed · 06-12-2023, 01:46 PM

Over the weekend I painted my new brake calipers to be ready prior to my brake conversion. Used high heat primer, followed by VHT high temp black and clear coat.

**Rust_never_sleeps** · 06-13-2023, 04:02 AM

Popped the rear lines off the combo valve and blew air through them to verify there were not obstructions.
RR finally bled out fine with low vacuum. LR still seems to have something constricting or perhaps leaking air
Will confirm both in the cold light of day

Casper42 · 06-14-2023, 06:55 PM

slapped my truck onto my chest - so far, much better fuel economy

72c20customcamper · 06-14-2023, 07:24 PM

Cool shirt .

Towed the trailer over to my moms . It will be on the trailer tomorrow behind the motorhome . Should be in Macungie in the afternoon

**Jiggers72-GMC** · 06-15-2023, 07:03 AM

Nice T shirt Casper, very nice

have a safe trip yo PA Mark, lookin' good

**samkost** · 06-15-2023, 12:35 PM

After chasing and correcting a couple of wiring/fuse box gremlins, I dropped the steering column (hopefully for the last time

) and replaced the 50 year old tachometer.

**'68OrangeSunshine** · 06-15-2023, 07:28 PM

Quote:

Originally Posted by samkost

After chasing and correcting a couple of wiring/fuse box gremlins, I dropped the steering column (hopefully for the last time

) and replaced the 50 year old tachometer.

How robust are those OEM tachs?
Will a reversed polarity burn them out?
[Asking for a friend.]

Casper42 · 06-15-2023, 08:26 PM

why'd you need to drop the column? I got my cluster out "fairly" easily without - just a little finesse and wiggling. were you in attendance at Enumclaw the other week?

Quote:

Originally Posted by samkost

After chasing and correcting a couple of wiring/fuse box gremlins, I dropped the steering column (hopefully for the last time

) and replaced the 50 year old tachometer.

**pjmoreland** · 06-16-2023, 03:29 AM

Finally got around to stripping and painting these pulleys I got from Classic Bowties over a year ago in preparation for installing a Gen 5 Vintage Air system in a few weeks.

**samkost** · 06-16-2023, 10:17 AM

Quote:

Originally Posted by '68OrangeSunshine

How robust are those OEM tachs?
Will a reversed polarity burn them out?
[Asking for a friend.]

I replaced it with an aftermarket tach.
I’m unfamiliar with the reverse polarity you mention.

**samkost** · 06-16-2023, 10:34 AM

Quote:

Originally Posted by Casper42

why'd you need to drop the column? I got my cluster out "fairly" easily without - just a little finesse and wiggling. were you in attendance at Enumclaw the other week?

Just being careful.
Fresh paint mainly.
Oil gauge line, speedometer cable, dash harness clip and big clumsy hands for easier access.

I missed the Enumclaw show.

72c20customcamper · 06-16-2023, 02:25 PM

Found a nice period correct Coleman cooler at a reasonable price

Casper42 · 06-16-2023, 06:14 PM

Installed Retrobright LED headlights, in Classic White. Far better visibility, and they look pretty close'ish to OEM. Classic Industries ran a 20% discount last weekend, so that really helped on this somewhat pricey purchase.

67C10Step · 06-17-2023, 06:53 PM

Wife and I took the truck on its furthest journey since putting it back on the road. Went to the annual car show and swap meet on Petit Jean mountain in Morrilton, AR. About 80 miles one way and the truck did fine. Did get me to thinking about vintage air though!
Picked up a pair of Chevrolet script valve covers for my little mouse motor. Gonna try to get those cleaned up and painted before the C10 shin dig in July in north AR.

**Sheepdip** · 06-17-2023, 08:52 PM

My GV Overdrive went on the blink a couple weeks ago and finally had time to trouble shoot it. I started with the easily accessible stuff and thankfully found it right away.

The button/switch on the manual gear shift has two bullet connectors GV supplied that feed into a little snap in telephone style connection adapter pigtail just before the controller, about 4" or so long. It grounds the milli-volt relay that powers the 12 volt solenoid to engage the OD.

I unplugged that phone connector from the controller and hit it with Electric Clean, plugged it back in...no dice.

Next I unplugged the two bullet connectors at the other end of the pigtail and hit them with Electric Clean, they tested with good continuity with the ohm meter so I knew the button was good, re-connected and... Bingo!
Dirty/bad connection at the bullets was the problem. I was a happy camper!

**Rust_never_sleeps** · 06-20-2023, 01:50 PM

Got the rear drums pressure bled, after failing multiple times to do so with vacuum(yes the shuttle valve was pinned). Had to finish building the Motive bleeder due to missing o-ring and their goofy clamping system, but it works really well once it seals.

indymachinist · 06-20-2023, 06:57 PM

Charged the A/C. Rode home with the windows closed in comfort. Oh yeah!

**Steeveedee** · 06-20-2023, 07:52 PM

Brought some glued-up wood for shelving home. Made a freeway run to warm up the bodily fluids while I was at it. Surging at idle. Probably needs a new needle and seat, again. Cliff Ruggle's kit lasted a few years. I got lazy and bought local, didn't get the ethanol-proof needle.

**pjmoreland** · 06-21-2023, 04:16 AM

Stripped and painted these original side mirrors

72c20customcamper · 06-21-2023, 10:06 AM

Have I said before I hate doing hoods . Four coats of filler primer dusted with guide coat , initial sand with 150 paper . Going up to 220 - 320- final is 400 since it’s a single stage paint

67C10Step · 06-21-2023, 05:40 PM

72c20,
How do you like the Durablocks for sanding? Saw some in different lengths at the swap meet last weekend and considered them since I am about to really get into the bodywork on my jeep project.

72c20customcamper · 06-21-2023, 07:55 PM

Quote:

Originally Posted by 67C10Step

72c20,
How do you like the Durablocks for sanding? Saw some in different lengths at the swap meet last weekend and considered them since I am about to really get into the bodywork on my jeep project.

There are very good . I bought the big set at the Carlisle truck show two years ago prices are all over the place for the same set guess it depends on the seller . I did have a couple of them that I had bought years ago but never the whole set

**pjmoreland** · 06-23-2023, 01:30 PM

Installed some original mirror heads after painting them black. Painted this crusty lug wrench while I was at it.

06-12-2023, 01:46 PM	#3928
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today.The 3rd chapter Over the weekend I painted my new brake calipers to be ready prior to my brake conversion. Used high heat primer, followed by VHT high temp black and clear coat. Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

06-13-2023, 04:02 AM	#3929
Rust_never_sleeps Senior Member Join Date: Jun 2022 Location: San Ramon,CA Posts: 405	Re: What did you do to your truck today.The 3rd chapter Popped the rear lines off the combo valve and blew air through them to verify there were not obstructions. RR finally bled out fine with low vacuum. LR still seems to have something constricting or perhaps leaking air Will confirm both in the cold light of day

06-14-2023, 06:55 PM	#3930
Casper42 Registered User Join Date: Nov 2022 Location: Seattle, WA Posts: 312	Re: What did you do to your truck today.The 3rd chapter slapped my truck onto my chest - so far, much better fuel economy Attached Images __________________ '72 C10 Cheyenne SWB North Carolina truck for 50 years, 72k original miles, Medium/Hawaiian Blue, 3 owners - one for 40 years, garaged kept, original: sheetmetal, undercarriage, moldings, glass * * * New - engine rebuild at 65k in 2015, one repaint in 2010, new front bumper, houndstooth seat, carpet, 8 inch rally wheels on 275-60R-15, LED lighting. - Semper Paratus!

06-14-2023, 07:24 PM	#3931
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,173	Re: What did you do to your truck today.The 3rd chapter Cool shirt . Towed the trailer over to my moms . It will be on the trailer tomorrow behind the motorhome . Should be in Macungie in the afternoon Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

06-15-2023, 07:03 AM	#3932
Jiggers72-GMC Senior Member Join Date: Mar 2021 Location: up North Posts: 541	Re: What did you do to your truck today.The 3rd chapter Nice T shirt Casper, very nice have a safe trip yo PA Mark, lookin' good __________________ Gerry, North Bay Ontario 1971 Chevy K10 short stepper, 518 med green & white 1972 GMC C1500 long box, dark Brown, owned since 1977 1969 GMC C2500 manual

06-15-2023, 12:35 PM	#3933
samkost Senior Member Join Date: Sep 2014 Location: Lake Tapps, Wa. Posts: 611	Re: What did you do to your truck today.The 3rd chapter After chasing and correcting a couple of wiring/fuse box gremlins, I dropped the steering column (hopefully for the last time ) and replaced the 50 year old tachometer. Attached Images

06-16-2023, 03:29 AM	#3936
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,303	Re: What did you do to your truck today.The 3rd chapter Finally got around to stripping and painting these pulleys I got from Classic Bowties over a year ago in preparation for installing a Gen 5 Vintage Air system in a few weeks. Attached Images

06-16-2023, 02:25 PM	#3939
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,173	Re: What did you do to your truck today.The 3rd chapter Found a nice period correct Coleman cooler at a reasonable price Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

06-16-2023, 06:14 PM	#3940
Casper42 Registered User Join Date: Nov 2022 Location: Seattle, WA Posts: 312	Re: What did you do to your truck today.The 3rd chapter Installed Retrobright LED headlights, in Classic White. Far better visibility, and they look pretty close'ish to OEM. Classic Industries ran a 20% discount last weekend, so that really helped on this somewhat pricey purchase. Attached Images __________________ '72 C10 Cheyenne SWB North Carolina truck for 50 years, 72k original miles, Medium/Hawaiian Blue, 3 owners - one for 40 years, garaged kept, original: sheetmetal, undercarriage, moldings, glass * * * New - engine rebuild at 65k in 2015, one repaint in 2010, new front bumper, houndstooth seat, carpet, 8 inch rally wheels on 275-60R-15, LED lighting. - Semper Paratus!

06-17-2023, 06:53 PM	#3941
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,420	Re: What did you do to your truck today.The 3rd chapter Wife and I took the truck on its furthest journey since putting it back on the road. Went to the annual car show and swap meet on Petit Jean mountain in Morrilton, AR. About 80 miles one way and the truck did fine. Did get me to thinking about vintage air though! Picked up a pair of Chevrolet script valve covers for my little mouse motor. Gonna try to get those cleaned up and painted before the C10 shin dig in July in north AR. __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2020 Toyota CH-R 2020 Acura MDX

06-17-2023, 08:52 PM	#3942
Sheepdip Senior Member Join Date: Nov 2018 Location: Waterford California Posts: 2,391	Re: What did you do to your truck today.The 3rd chapter My GV Overdrive went on the blink a couple weeks ago and finally had time to trouble shoot it. I started with the easily accessible stuff and thankfully found it right away. The button/switch on the manual gear shift has two bullet connectors GV supplied that feed into a little snap in telephone style connection adapter pigtail just before the controller, about 4" or so long. It grounds the milli-volt relay that powers the 12 volt solenoid to engage the OD. I unplugged that phone connector from the controller and hit it with Electric Clean, plugged it back in...no dice. Next I unplugged the two bullet connectors at the other end of the pigtail and hit them with Electric Clean, they tested with good continuity with the ohm meter so I knew the button was good, re-connected and... Bingo! Dirty/bad connection at the bullets was the problem. I was a happy camper!

06-20-2023, 01:50 PM	#3943
Rust_never_sleeps Senior Member Join Date: Jun 2022 Location: San Ramon,CA Posts: 405	Re: What did you do to your truck today.The 3rd chapter Got the rear drums pressure bled, after failing multiple times to do so with vacuum(yes the shuttle valve was pinned). Had to finish building the Motive bleeder due to missing o-ring and their goofy clamping system, but it works really well once it seals.

06-20-2023, 06:57 PM	#3944
indymachinist Registered User Join Date: Jun 2015 Location: Indanapolis, IN Posts: 601	Re: What did you do to your truck today.The 3rd chapter Charged the A/C. Rode home with the windows closed in comfort. Oh yeah! Attached Images __________________ -Curt My 1968 Chevy shortbed stepside build Last edited by indymachinist; 06-20-2023 at 07:06 PM.

06-20-2023, 07:52 PM	#3945
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,124	Re: What did you do to your truck today.The 3rd chapter Brought some glued-up wood for shelving home. Made a freeway run to warm up the bodily fluids while I was at it. Surging at idle. Probably needs a new needle and seat, again. Cliff Ruggle's kit lasted a few years. I got lazy and bought local, didn't get the ethanol-proof needle. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

06-21-2023, 04:16 AM	#3946
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,303	Re: What did you do to your truck today.The 3rd chapter Stripped and painted these original side mirrors Attached Images



Register or Log In To remove these advertisements.

06-21-2023, 10:06 AM	#3947
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,173	Re: What did you do to your truck today.The 3rd chapter Have I said before I hate doing hoods . Four coats of filler primer dusted with guide coat , initial sand with 150 paper . Going up to 220 - 320- final is 400 since it’s a single stage paint Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

06-21-2023, 05:40 PM	#3948
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,420	Re: What did you do to your truck today.The 3rd chapter 72c20, How do you like the Durablocks for sanding? Saw some in different lengths at the swap meet last weekend and considered them since I am about to really get into the bodywork on my jeep project. __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2020 Toyota CH-R 2020 Acura MDX

06-23-2023, 01:30 PM	#3950
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,303	Re: What did you do to your truck today.The 3rd chapter Installed some original mirror heads after painting them black. Painted this crusty lug wrench while I was at it. Attached Images

Register or Log In To remove these advertisements.