|
05-19-2013, 09:46 AM
|
#1 |
|
Registered User
Join Date: Jul 2011
Location: Zebulon GA
Posts: 128
|
Adding Door Speakers
Hey guys, I have a 92 GMC and I'm looking to put door speakers in. I have manual windows, so I can't just stick one in the middle. Last time I was at the junkyard though, I noticed the 95-98s had door speakers. Would it be possible to just take the inner door and the door panel off one of them and swap them onto mine?
__________________
80 K10 350 4 spd 4 Inch lift, 33 inch BFG M/t |
|
|
|
05-22-2013, 09:31 PM
|
#2 |
|
Registered User
Join Date: Mar 2012
Location: NPR, FL
Posts: 9
|
Re: Adding Door Speakers
Keep them down low in the front. I had to trim very little sheet metal to fit the 6x9's. Mine is a 95 with the early interior. Only reason I went this route was previous owner already had 6 1/2's in the doors. May be different with the crank handles though. Also, to answer your question, the door panels all the way up to 98 should fit.
|
|
|
|
|
05-23-2013, 07:17 AM
|
#3 |
|
Registered User
Join Date: Mar 2008
Location: tn
Posts: 286
|
Re: Adding Door Speakers
This is on my to do list... keep us informed...
__________________
"If at first you don't succeed use more duct tape" Red Green.... Danger --if you meet it promptly and without flinching -- you will reduce the danger by half. Never run away from anything. Never! -Winston Churchill A few of my holsters............. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
