The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-19-2020, 08:49 PM   #1
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
wheel vintique rally rims whats the deal ?

i searched a bit and see there not available now and no real info why .

i was looking to get 2 or 4 if the deal was good 15x10 5 lug rims .

anyone know the scoop or story on were they went ?
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 07-20-2020, 02:07 AM   #2
wixthedog
Registered User
 
wixthedog's Avatar
 
Join Date: Sep 2019
Location: Magnolia, TX
Posts: 225
Re: wheel vintique rally rims whats the deal ?

Have you tried calling them? I ordered mine from Summit last year.
__________________
Mike
1976 C10 RCLB - 350 - SM465 4 Spd - 4.5"/6" Drop
Obligatory Build Thread HERE!
1979 C20 RCLB - 350 - TH350 Auto
wixthedog is offline   Reply With Quote
Old 07-20-2020, 10:57 AM   #3
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: wheel vintique rally rims whats the deal ?

jegs shows both part #'s but there on back order until end of this month and early next month .

5" backspace is end of aug
4.5" backspace is end of this month .

knowing there is 2 options what is every one running on there 2wd ? my rig is 2wd owered 2.5" and 12 bolt rear .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 07-20-2020, 05:33 PM   #4
evan
Registered User
 
evan's Avatar
 
Join Date: Jul 2005
Location: SK, Canada
Posts: 488
Re: wheel vintique rally rims whats the deal ?

I have Vision American Muscle 55 Rally wheels bookmarked as a possibility. Have you considered those? They have good reviews and seem to fit stock hubcaps too based on what I've read.
__________________
Evan B.
evan is offline   Reply With Quote
Old 07-20-2020, 07:58 PM   #5
Loco83
Registered User
 
Loco83's Avatar
 
Join Date: Nov 2018
Location: Cali
Posts: 282
Re: wheel vintique rally rims whats the deal ?

I wouldn't buy a WV rally rim again, can't get them to balance out, can't send them back, their disclaimer is once the tires are mounted your on your own BS.
Check these guys out instead.
http://davidsrallywheels.com/wheels/4058379
Loco83 is offline   Reply With Quote
Old 07-20-2020, 08:17 PM   #6
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: wheel vintique rally rims whats the deal ?

Quote:
Originally Posted by evan View Post
I have Vision American Muscle 55 Rally wheels bookmarked as a possibility. Have you considered those? They have good reviews and seem to fit stock hubcaps too based on what I've read.
wrong style for me . i want the 16 hole squared style for the gm trucks .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 07-20-2020, 08:20 PM   #7
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: wheel vintique rally rims whats the deal ?

Quote:
Originally Posted by Loco83 View Post
I wouldn't buy a WV rally rim again, can't get them to balance out, can't send them back, their disclaimer is once the tires are mounted your on your own BS.
Check these guys out instead.
http://davidsrallywheels.com/wheels/4058379
funny you should say that . go look at the part#'s of the truck rally for both places . . . there the exact same .

and i always check my rims on the balancer first . 15+ years i did wheels and tires in a shop . but i wasnt the sale guy just the install guy .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 07-20-2020, 08:21 PM   #8
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: wheel vintique rally rims whats the deal ?

i am leaning to the 15x8 i have for the rear and i have atleast 1 good maybe 2 of the G-series van 15x6.5 i can do for the front end . this would get me a good skinny/fat look .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 07-21-2020, 06:03 AM   #9
wixthedog
Registered User
 
wixthedog's Avatar
 
Join Date: Sep 2019
Location: Magnolia, TX
Posts: 225
Re: wheel vintique rally rims whats the deal ?

I run a 15x8 4” front and a 15x10 5” rear BS.
__________________
Mike
1976 C10 RCLB - 350 - SM465 4 Spd - 4.5"/6" Drop
Obligatory Build Thread HERE!
1979 C20 RCLB - 350 - TH350 Auto
wixthedog is offline   Reply With Quote
Old 07-21-2020, 01:23 PM   #10
ShortHaul
Registered User
 
ShortHaul's Avatar
 
Join Date: Apr 2018
Location: Penngrove, CA
Posts: 697
Re: wheel vintique rally rims whats the deal ?

So I've bought from WV a bunch recently, and even when the say they're back ordered they have shipped before their estimated date. I just bought my latest set of 16x8 8 luggers and they said backordered until August. They are set to arrive today. I can confirm that they aren't always the easiest to balance, but my tire/wheel guy said that's not too uncommon for steel wheels... I'm no expert, but I've bought 3 full sets in the past 3 years, plus a set of rears for my impala, and a spare for Sweet Pea and so far no issues whatsoever... (thats 15 wheels if you're counting I guess I'm keeping these guys in business!)
__________________
"Sweet Pea" 1975 Cheyenne 20
http://67-72chevytrucks.com/vboard/s...00#post8477900
"Bourbon" 1975 Suburban ScottsdaleSOLD
https://67-72chevytrucks.com/vboard/...49#post8769049
”Otis” 1970 C10 SWB -SOLD
http://67-72chevytrucks.com/vboard/s...d.php?t=762766
”Chebby” 1962 Impala LS/TKO-500
http://www.pro-touring.com/threads/1...2-Impala-Build
ShortHaul is offline   Reply With Quote
Old 07-22-2020, 12:22 AM   #11
Factory Guy
Senior Member
 
Factory Guy's Avatar
 
Join Date: Jun 2019
Location: Midway USA Kentucky
Posts: 536
Re: wheel vintique rally rims whats the deal ?

Bought All 5 of my WV from Jegs with no problems last year all balanced fine. All 16 x 8".

Many good reviews on WV from guys I hang with.

Compared to Stockton Wheel they were much more reasonable and you get a new wheel to boot!

I think Stockton wheel wanted $300 a wheel for a similar combo to what I got from WV.
Attached Images
 
Factory Guy is offline   Reply With Quote
Old 07-22-2020, 06:18 PM   #12
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: wheel vintique rally rims whats the deal ?

well i just ordered 4 cooper cobra tires .

235/70/15 for the front and 255/70/15 for the rear .

plan is test fit a 235 on a 6.5" rim and see if i like the look . if not swap to a 7" rim . the rear will be my 8" rims . i want to get this sucker rolling again and finished . so use what i got and get it done . if i find a deal on some 10" wide later then maybe we can get them and change it up a little .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 07-24-2020, 05:15 PM   #13
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: wheel vintique rally rims whats the deal ?

well 2 of the 4 cooper cobra radials g/t showed up today so i went over to a friends shop and test mounted the 235/70/15 on my G-10 van 15x6.5 rally rim . not to bad at all for looks of the sidewall . so i took it back off the rim and set it in the pile for the blast box to strip them down BARE .

going to do them up in solid white to go with the dark blue / white combo the truck will be . but for now here is a few pics to let you enjoy .

2 test fit shots
rim before blast and after blast .
Attached Images
     
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 07-25-2020, 08:28 PM   #14
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: wheel vintique rally rims whats the deal ?

got a little bit further today with 1 front and 1 rear . finished blasting and got 3 coats of bright white on them. then the center cap's got tested out to see what i want . i was leaning to the black caps but now i see the chrome i am leaning that direction . using 88-98 center caps and conversion nuts to put them together .
Attached Images
    
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 07-27-2020, 07:16 PM   #15
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: wheel vintique rally rims whats the deal ?

looking real good these days .
Attached Images
  
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 07-28-2020, 07:11 AM   #16
Palf70Step
State of Confusion!

 
Palf70Step's Avatar
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,575
Re: wheel vintique rally rims whats the deal ?

Very Nice!
__________________
Bill
1970 Chevy Custom/10 LWB Fleetside
2010 Toyota Tacoma PreRunner SR5 Double Cab - DD

Member of Louisiana Classic Truck Club (LCTC)

Bill's Gallery
Life isn't tied with a bow, but it's still a gift.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!
Palf70Step is offline   Reply With Quote
Old 08-01-2020, 07:51 AM   #17
JT_Trucks87
Active Member
 
JT_Trucks87's Avatar
 
Join Date: Nov 2016
Location: Holden MO
Posts: 180
Re: wheel vintique rally rims whats the deal ?

Getting my wheels from them was an absolute nightmare. Mine are 16x10 but they were on national back order. I thought ordering directly from wheel vintiques would speed the process up. I was wrong took almost 9 weeks from ordering them to receiving them. I am happy with the product though.
Attached Images
  
__________________
1987 V30 Silverado SRW 454/400 4x4 104k original paint
1992 K3500 Silverado SRW 454/4L80e 4x4 114k
1971 K20 Cheyenne:
http://67-72chevytrucks.com/vboard/s...d.php?t=804580

https://67-72chevytrucks.com/vboard/...d.php?t=837441

Instagram: jt_trucks3500
JT_Trucks87 is offline   Reply With Quote
Old 08-01-2020, 11:09 AM   #18
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: wheel vintique rally rims whats the deal ?

thanks for the info guys .

got my lug nut caps and conversion nuts the other day . here is what i have so far .
Attached Images
  
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 12-03-2020, 09:47 PM   #19
SSSilverado
Registered User
 
SSSilverado's Avatar
 
Join Date: May 2017
Location: King George, VA
Posts: 22
Re: wheel vintique rally rims whats the deal ?

Nice.
SSSilverado is offline   Reply With Quote
Old 12-03-2020, 09:54 PM   #20
SSSilverado
Registered User
 
SSSilverado's Avatar
 
Join Date: May 2017
Location: King George, VA
Posts: 22
Re: wheel vintique rally rims whats the deal ?

I am also looking for a 15x8 rally for a spare. I tried getting a steel rim, but my drums in rear wouldn't let the wheel all the way on. I thought Summit used to carry Truck Rally wheels, I thought they had 8" and 10" widths, I'll keep searching. I had all my 4 wheels power coated. I sanded & touch sprayed them for years, finally got them powder coated.
Attached Images
 
SSSilverado is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:44 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com