Got the door panels finished - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigdon-70blazer · 08-10-2009, 09:58 PM

These got painted over the weekend and I installed them tonite. They are very slick so I thought you all would like to see. The doors are 99% done now but I need your opinion. I got those off white arm rests and they appeared at first glance several weeks ago to be too white but they don't seem too bad or do they? I had some rests that were a light gray in color but I had to replace them and wouldn't you know, no exact color reproduction so I was going to dye of paint these. The panels are about the same color they were from the factory, keep in mind the blazer was the yellow color originally. I had thought that I would paint them the same color as the dash but now I am unsure...decisions, decisions! What do you think!?

bigdon-70blazer · 08-10-2009, 10:00 PM

The door panels are more biege than they look on screen.

Big J · 08-10-2009, 10:06 PM

I think it looks great. Nice contrast to the green. Keep rockin' it.

NTR72GMC · 08-11-2009, 04:55 PM

looks good I would keep it as is but it is hard to tell from a picture how it realy looks.

SeventyOne · 08-11-2009, 06:20 PM

I would paint the dash pad to match the door panels/arm rests - look great!

**71blksuper4x4** · 08-11-2009, 07:22 PM

here's my 2 cents. I would leave them alone, and let mother nature change the color. With that white, with just everyday use, it will get dirty, and when you go to clean it, it won't be as white anymore, problem solved. Atleast, see what happens I say. Trevor

CTENTA1 · 08-13-2009, 11:39 AM

Blazer is coming out good. My opinion. How about painting door panels same color to the dash pad and painting arm rest same color as body on Blazer? That way everything matches enterior/exterior. Its more work but more work pays off.

jaros44sr · 08-13-2009, 12:34 PM

JMHO, but I think it makes a nice contrast as is. What color are your seats going to be, they are the closest to the door panel and should match them

BTW, those floors look way to nice to cover up, I would get a full set of mats. That way you can keep an eye on any rust issues that might pop up by lifting the mat

Where did you find that grommet for the screw on the door under the vent window

**SOON2BLAZE** · 08-13-2009, 02:15 PM

Looks great!

72BlckButy · 08-13-2009, 02:18 PM

Don that thing is looking amazing!

Before I can answer your question about the panels, I need to know what color are the seats/carpet going to be?

bigdon-70blazer · 08-13-2009, 10:08 PM

Seats are going back original style plain jane light tan material, I found it with the help of jaros44. The floor is going back with wall to wall black rubber floor mat, not original styling because I can not find that, been looking but I seem to have no luck in this area. Unless anyone out there knows where I can find the original looking black floor mat. The color in the pic is really lighter than it really is so it is somewhat decieving.

bigdon-70blazer · 08-13-2009, 10:18 PM

Quote:

Originally Posted by jaros44sr

JMHO, but I think it makes a nice contrast as is. What color are your seats going to be, they are the closest to the door panel and should match them

BTW, those floors look way to nice to cover up, I would get a full set of mats. That way you can keep an eye on any rust issues that might pop up by lifting the mat

Where did you find that grommet for the screw on the door under the vent window

They (grommets) are original. Seats are a light tan original style vinyl ribbed material for utility buckets. Thanks for the words!

72BlckButy · 08-13-2009, 11:11 PM

Don, looks like I'm just going to have to see it first hand to give you my full honest opinion...

pete&tanya · 08-13-2009, 11:12 PM

Wow that look way cool great job!

tcb-1 · 08-16-2009, 07:23 PM

good night, that thing is beautiful, big brother.

those pics are in the garage under the flourescents. I'd like to see what those colors look like in natural light... but it looks great to me. the utility buckets will match them to a tee.

that K5 has come a long way. and taking your time and doing it right is definitely paying off!! I'm jealous!

08-10-2009, 09:58 PM	#1
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,498	Got the door panels finished These got painted over the weekend and I installed them tonite. They are very slick so I thought you all would like to see. The doors are 99% done now but I need your opinion. I got those off white arm rests and they appeared at first glance several weeks ago to be too white but they don't seem too bad or do they? I had some rests that were a light gray in color but I had to replace them and wouldn't you know, no exact color reproduction so I was going to dye of paint these. The panels are about the same color they were from the factory, keep in mind the blazer was the yellow color originally. I had thought that I would paint them the same color as the dash but now I am unsure...decisions, decisions! What do you think!? Attached Images

08-10-2009, 10:00 PM	#2
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,498	Re: Got the door panels finished The door panels are more biege than they look on screen.

08-10-2009, 10:06 PM	#3
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,773	Re: Got the door panels finished I think it looks great. Nice contrast to the green. Keep rockin' it. __________________ BAZINGA! My Build

08-11-2009, 04:55 PM	#4
NTR72GMC 2wd FTW!!!! Join Date: Jan 2007 Location: SLC UTAH Posts: 673	Re: Got the door panels finished looks good I would keep it as is but it is hard to tell from a picture how it realy looks.

08-11-2009, 06:20 PM	#5
SeventyOne Registered User Join Date: Mar 2007 Location: Oakland, Ca Posts: 1,362	Re: Got the door panels finished I would paint the dash pad to match the door panels/arm rests - look great!

08-11-2009, 07:22 PM	#6
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,149	Re: Got the door panels finished here's my 2 cents. I would leave them alone, and let mother nature change the color. With that white, with just everyday use, it will get dirty, and when you go to clean it, it won't be as white anymore, problem solved. Atleast, see what happens I say. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

08-13-2009, 11:39 AM	#7
CTENTA1 Registered 1971 K5 Join Date: Dec 2008 Location: SO.CEN.CAL Posts: 428	Re: Got the door panels finished Blazer is coming out good. My opinion. How about painting door panels same color to the dash pad and painting arm rest same color as body on Blazer? That way everything matches enterior/exterior. Its more work but more work pays off.

08-13-2009, 12:34 PM	#8
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,421	Re: Got the door panels finished JMHO, but I think it makes a nice contrast as is. What color are your seats going to be, they are the closest to the door panel and should match them BTW, those floors look way to nice to cover up, I would get a full set of mats. That way you can keep an eye on any rust issues that might pop up by lifting the mat Where did you find that grommet for the screw on the door under the vent window __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 08-13-2009 at 12:36 PM.

08-13-2009, 02:15 PM	#9
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 905	Re: Got the door panels finished Looks great!

08-13-2009, 02:18 PM	#10
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Got the door panels finished Don that thing is looking amazing! Before I can answer your question about the panels, I need to know what color are the seats/carpet going to be? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-13-2009, 10:08 PM	#11
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,498	Re: Got the door panels finished Seats are going back original style plain jane light tan material, I found it with the help of jaros44. The floor is going back with wall to wall black rubber floor mat, not original styling because I can not find that, been looking but I seem to have no luck in this area. Unless anyone out there knows where I can find the original looking black floor mat. The color in the pic is really lighter than it really is so it is somewhat decieving.

08-13-2009, 11:11 PM	#13
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Got the door panels finished Don, looks like I'm just going to have to see it first hand to give you my full honest opinion... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-13-2009, 11:12 PM	#14
pete&tanya Registered User Join Date: Jul 2009 Location: Turlock, Ca Posts: 4	Re: Got the door panels finished Wow that look way cool great job!

08-16-2009, 07:23 PM	#15
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Got the door panels finished good night, that thing is beautiful, big brother. those pics are in the garage under the flourescents. I'd like to see what those colors look like in natural light... but it looks great to me. the utility buckets will match them to a tee. that K5 has come a long way. and taking your time and doing it right is definitely paying off!! I'm jealous! __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.