1968 GMC Buzzsaw Build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sighlurr · 10-12-2019, 10:59 AM

I’ve been off this board for a few years now. My wife and I now have 3 boys - twin 6 year olds and a 2 year old. All have the speed bug and need to go fast. I’m finally at a point where I can get back into the C10 game and recently picked up a longterm project: A 1968 GMC 1/2 ton SWB, 2 owner truck from Fremont, CA. I’m the 3rd owner, this truck changed hands back in 1982. I started the YOM plate process yesterday at the DMV in Vallejo, battled an angry old lady to get the original yellow on black plates back on the truck.

I’ve been looking for a few years for a highly optioned truck - trim, A/C, V8, etc. But, I’m starting to realize there is only so much time in life for car projects. I don’t know if I’ll ever get to a Gen 2 Camaro build to throw around the track. So why not combine the 2? Race cars were stripped down, no console, no extras to keep them light. So I’m starting with a base truck, a manual 3 spd on the column with an inline 6.

The plan is to do a Choppin’ Block front kit with coilovers, rear link, 6.0 all aluminum LS, the L76 Holden engine with a 6 speed. Something that will be fun to drive sideways when I have some alone time. The interior will stay the same color combo, but we’re going to use the iconic Ferrari red - Rosso Corsa. I have an idea for a 40/20/40 bench seat, something to help you stay in place around corners. Red leather will match the dash and door panels, but I’d like red and white houndstooth inserts. Something down the side to tie in the red on the exterior, more to come on that later.

Here’s what we’re starting with, pretty excited to get back and plugged in with the C10 Club. If you’re in the SF Bay Area East Bay, get at me. Always around to help with projects and growing my C10 network. ✌️ On IG as sighlurr

Sweeet67 · 10-12-2019, 11:20 AM

Welcome back! That looks like a very nice start to a project. Keep the progress pictures coming. Or start a build thread so we can follow along. ��

**Getter-Done** · 10-12-2019, 03:14 PM

Welcome Back.

.

**Ol Blue K20** · 10-13-2019, 10:38 AM

Welcome back! That truck looks pretty nice.

sighlurr · 11-16-2019, 01:28 PM

Over the next few months this truck will have a few different looks. Next week I’m going to throw on a set of 15” slots with some Cooper Cobra meats. I’ll run those until the camper shell and wheels/ tires sell here locally. Then I’ll go back to the steelies (painted black) and stock 68 GMC caps. I need 4 ‘68 gray caps for nubs and these are getting tough to find.

a1vintage69 hooked me up with a pair of GMC center caps for clips. Seems like a quick conversion from clips to nubs.

67swb72klb · 11-16-2019, 04:10 PM

Looks to be a nice rust free truck you guys are lucky on the left coast

sighlurr · 11-16-2019, 07:02 PM

I left about 1/8” to be safe, but ended up trimming this down to the seam
and rolled it in.

sighlurr · 12-04-2019, 09:54 AM

245/60 and 285/50 Cooper Cobras on 8” and 10” wide slot mags.

**Ol Blue K20** · 12-04-2019, 11:16 AM

Looks great! I learned something on those caps.I would have never thought of that.

sighlurr · 12-04-2019, 11:45 AM

Quote:

Originally Posted by Ol Blue K20

Looks great! I learned something on those caps.I would have never thought of that.

Thank you, sir! Still need 1 more to complete the set.

10-12-2019, 10:59 AM	#1
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	1968 GMC Buzzsaw Build I’ve been off this board for a few years now. My wife and I now have 3 boys - twin 6 year olds and a 2 year old. All have the speed bug and need to go fast. I’m finally at a point where I can get back into the C10 game and recently picked up a longterm project: A 1968 GMC 1/2 ton SWB, 2 owner truck from Fremont, CA. I’m the 3rd owner, this truck changed hands back in 1982. I started the YOM plate process yesterday at the DMV in Vallejo, battled an angry old lady to get the original yellow on black plates back on the truck. I’ve been looking for a few years for a highly optioned truck - trim, A/C, V8, etc. But, I’m starting to realize there is only so much time in life for car projects. I don’t know if I’ll ever get to a Gen 2 Camaro build to throw around the track. So why not combine the 2? Race cars were stripped down, no console, no extras to keep them light. So I’m starting with a base truck, a manual 3 spd on the column with an inline 6. The plan is to do a Choppin’ Block front kit with coilovers, rear link, 6.0 all aluminum LS, the L76 Holden engine with a 6 speed. Something that will be fun to drive sideways when I have some alone time. The interior will stay the same color combo, but we’re going to use the iconic Ferrari red - Rosso Corsa. I have an idea for a 40/20/40 bench seat, something to help you stay in place around corners. Red leather will match the dash and door panels, but I’d like red and white houndstooth inserts. Something down the side to tie in the red on the exterior, more to come on that later. Here’s what we’re starting with, pretty excited to get back and plugged in with the C10 Club. If you’re in the SF Bay Area East Bay, get at me. Always around to help with projects and growing my C10 network. ✌️ On IG as sighlurr Attached Images Last edited by sighlurr; 10-13-2019 at 11:37 PM.

10-12-2019, 11:20 AM	#2
Sweeet67 Registered User Join Date: Aug 2016 Location: Idaho Falls, ID Posts: 232	Re: 1968 GMC Buzzsaw Build Welcome back! That looks like a very nice start to a project. Keep the progress pictures coming. Or start a build thread so we can follow along. ��

10-12-2019, 03:14 PM	#3
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,701	Re: 1968 GMC Buzzsaw Build Welcome Back. . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

10-13-2019, 10:38 AM	#4
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: 1968 GMC Buzzsaw Build Welcome back! That truck looks pretty nice. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

11-16-2019, 01:28 PM	#5
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: 1968 GMC Buzzsaw Build Over the next few months this truck will have a few different looks. Next week I’m going to throw on a set of 15” slots with some Cooper Cobra meats. I’ll run those until the camper shell and wheels/ tires sell here locally. Then I’ll go back to the steelies (painted black) and stock 68 GMC caps. I need 4 ‘68 gray caps for nubs and these are getting tough to find. a1vintage69 hooked me up with a pair of GMC center caps for clips. Seems like a quick conversion from clips to nubs. Attached Images

11-16-2019, 04:10 PM	#6
67swb72klb Registered User Join Date: Dec 2010 Location: livingston co.mi Posts: 2,447	Re: 1968 GMC Buzzsaw Build Looks to be a nice rust free truck you guys are lucky on the left coast __________________ California 65 GTO---Texas 64 burb 283 ---Oklahoma 67 CST SWB BBW wood bed 327 2004r---New Mexico 72 k10 350 350 auto---Georga 72 short step project

11-16-2019, 07:02 PM	#7
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: 1968 GMC Buzzsaw Build I left about 1/8” to be safe, but ended up trimming this down to the seam and rolled it in. Attached Images

12-04-2019, 09:54 AM	#8
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: 1968 GMC Buzzsaw Build 245/60 and 285/50 Cooper Cobras on 8” and 10” wide slot mags. Attached Images

12-04-2019, 11:16 AM	#9
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: 1968 GMC Buzzsaw Build Looks great! I learned something on those caps.I would have never thought of that. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.