OR Parting 1972 C20

[newstedcomeback]

This is all I need, minus the fan and heater core please.

Thank you

[DLTruck1973]

Originally Posted by newstedcomeback

Hello, I am looking for an engine side heater box. that is the last piece to my puzzle. I only need the box and hardware. (all screws for the fan, heater core and mounting on the firewall.) I already have everything for the inside and I have a new heater core and fan. could you please let me know the cost including shipping to Santa Rosa ca, zip code 95401. Thank you! -Joe

Hi Joe,

You are doing very nice work on the truck by the way. Looking forward to seeing it finished.

I will have to look in the selection and see what I have. I have a lot of these boxes in various conditions. I take it you would probably want a real nice one. I am off for the weekend but let me check on it Monday for you.

I will let you know what I have and then do a shipping quote if interested.

Thank you for the interest,
Thomas

[72kool]

Thanks. Ill pass on the hubcaps.good deal just really want factory ( ik im picky.sorry) im also looking for some hd 3/4 ton coil springs. What do you have availible?

[walkintall54]

put me in line for the black door panels,thanks

[RedRoad]

Originally Posted by DLTruck1973

I do have a very nice "no spin" with a 4:11 gear for $400.00 plus shipping. We would ship this in a small wood crate to make sure it gets to you safely. If interested I can get you a shipping quote with your zip code.

Thank you,
Thomas

Interested in the 3rd with No Spin, what is the shipping to 91342?

Is it a load bolt type? Roller or tapered bearing?

Thanks

[walkintall54]

I am interested in black door panels.Can you give me a quote shipped to 92503?

[vanislegmc]

Is the box for sale, if so what's condition.
Thanks

[vanislegmc]

I am looking for a box / truck bed for a 72, do you still have yours available. I am heading to Portland April 10th weekend

[notsolo]

Hey Thomas, is the steering column a tilt column? Ill take it, if it is...Thanks.... Ed.

[walkintall54]

Interested in door panels,if you still have them.Shipping quote to 92503

[DLTruck1973]

Originally Posted by newstedcomeback

This is all I need, minus the fan and heater core please.

Thank you

I should have a decent one for you for $50.00 plus shipping. It would come bare without the blower motor or heater core.

Let me know and I will get you a shipping quote.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by vanislegmc

I am looking for a box / truck bed for a 72, do you still have yours available. I am heading to Portland April 10th weekend

The box on this C20 is no good for sale and has been scraped. However we have some boxes from other trucks for sale 67-72. They will range from $200.00 to $600.00 depending on condition.

I will be at the Portland meet also but we are not hauling sheet metal. We are 2 hrs south of Portland if you are interested in coming down to pick one up. We would have to take care of this after the meet.

Let me know how nice of a box you are looking for. These will be bare and not come with gates or any hardware.

I can post some photos if are are interested.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by notsolo

Hey Thomas, is the steering column a tilt column? Ill take it, if it is...Thanks.... Ed.

Hi Ed,

Sorry no tilts available at this time. This truck did not have one.

Thank you for the interest,
Thomas.

[DLTruck1973]

To all of you interested in the black door panels, they have been sold and I do not have any others available to sell at this time.

Thank you for the interest,
Thomas

[Vintage Windmills]

Do you guys have any bronze colored chevy gates and pass fenders in good shape? Looking for original paint or just older paint to match.
Thanks,
Jud

[vanislegmc]

Thomas, that would be great if you could post photos of box for sale, would want the best condition you have.

Thanks.

Rob

[walkintall54]

Monday is fine on the quote. thanks

[DLTruck1973]

Originally Posted by walkintall54

Monday is fine on the quote. thanks

Not sure what you are waiting for a quote for. The door panels have sold a while ago. Sorry for any mis understanding,

Thomas

[DLTruck1973]

Originally Posted by Vintage Windmills

Do you guys have any bronze colored chevy gates and pass fenders in good shape? Looking for original paint or just older paint to match.
Thanks,
Jud

Hi Jud,

Do you have a paint code in mind? Want to make sure your bronze and my bronze are the same

Let me know,
Thank you,
Thomas

[DLTruck1973]

Originally Posted by vanislegmc

I am looking for a box / truck bed for a 72, do you still have yours available. I am heading to Portland April 10th weekend

If you send me your email on a PM (private message), I will send you some photos of a box I think you may like.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by newstedcomeback

This is all I need, minus the fan and heater core please.

Thank you

Here is the one I have available. Let me know if interested and I can get you a shipping quote.

Thank you,
Thomas

[Vintage Windmills]

Originally Posted by DLTruck1973

Hi Jud,

Do you have a paint code in mind? Want to make sure your bronze and my bronze are the same

Let me know,
Thank you,
Thomas

Hi Thomas, sure thing. The key thing is med bronze on the spid. The tailgate could be from a truck with any one of the following SPID codes:

522 solid med bronze/copper poly
551 conventional two-tone med bronze with a white roof
582 special two-tone med bronze with a white roof and white below the rockers
462 deluxe two-tone med bronze with a white roof and white between the upper and lower trim

For the fender, i would prefer it to be from a 522 or 551 without upper trim. I have a 582 here already with upper trim holes.

Thanks,

Jud

[DLTruck1973]

Originally Posted by Vintage Windmills

Hi Thomas, sure thing. The key thing is med bronze on the spid. The tailgate could be from a truck with any one of the following SPID codes:

522 solid med bronze/copper poly
551 conventional two-tone med bronze with a white roof
582 special two-tone med bronze with a white roof and white below the rockers
462 deluxe two-tone med bronze with a white roof and white between the upper and lower trim

For the fender, i would prefer it to be from a 522 or 551 without upper trim. I have a 582 here already with upper trim holes.

Thanks,

Jud

Hello Jud,

Sorry we cannot help with your request. Nothing in the stable with the
paint codes are are looking for. If something comes up in the future, I will let you know.

Thank you,
Thomas

[FireDave]

Would be interested in turn signal lights from front bumper, if available.

Thanks dave

[DLTruck1973]

Originally Posted by FireDave

Would be interested in turn signal lights from front bumper, if available.

Thanks dave

Are you looking for just the housings or just the lenses or the complete assembly?

I have any combination you want and in any condition you want.

Let me know and I will get you a price and some photos. I will be back on Monday morning.

Thank you,
Thomas