EVERYTHING MUST GO, (72 custom20, 462BB, some free parts) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

>X< · 08-27-2004, 10:27 PM

the 71 is almost done, just needs paint, so i am getting rid of everything. i am keeping my swb frame and the ac cab from the 72 for a frame up one day.

72 chevy lwb bed-good straight, diamond plate bedfloor-$500
72 lwb 3/4 frame with disc and dana 60 posi-make offer on all or some
2 fleet tailgates-free
pair of swb bedsides, need work-free
big ass diamond plate bumper for 72-$20
front chrome bumper for 72-$20

462 BB, bored, honed, built, 292 heads, decked, 3 angle valve job, ported, etc, new everything, fresh, never cranked. alum weiland intake, nice and oily on stand, included
i will get the spec sheet tomorrow. no dist, carb, pulleys- $2500

402 bb, taken apart because of vent exhaust valve (from above truck) complete, ac comp rebuilt, all pulleys, $200

comp cams k kit, 268h cam, all the stuff, brand new in box with reciepts. i have to check the price in summit, but i want 100 less than what it sells for in summit.

4 alloy 8 lug rims with tires that hold air- $50

4 ugly alloy 6 lug rims with old tires-$10

if you think of anything that i might have on the 72 let me know. i might even sell the dash bezel and tilt, but i dont know yet.

i will ship anything that i can, i mighteven drive some for the big stuff. i havent sold anything in years on here, but i have sold to 3 or 4 members. if it doesnt get sold it goes to the scrap.

>X< · 08-27-2004, 10:27 PM

oh yeah, i will post as many pics as you need by request

HuggerCST · 08-27-2004, 10:33 PM

I'minterested in the 402, or at least all the pulleys and brackets, and the swb sides. I'll PM you.

HuggerCST · 08-27-2004, 10:41 PM

Your pm box is full.

gaddman · 08-27-2004, 10:41 PM

Ditto on the 402 pullies and brackets...if Hugger doesn't take em.

Greg

>X< · 08-27-2004, 10:51 PM

i cleaned out my box. 402 goes all or nothing. if i sell the brackets alone nobody will ever want the 402.

incoma · 08-27-2004, 10:52 PM

Can you give me a pic of the back side of the rims?

>X< · 08-27-2004, 10:56 PM

the 8 lug or the 6? i'll get a pic as soon as possible and post

**ScottH** · 08-27-2004, 11:05 PM

Would like a pic of the 8 lug rims - SDELVY55@aol.com. Also, would u have ps setup for the big block?

Thanks

>X< · 08-27-2004, 11:05 PM

inspection sticker is from 99 on the 72. i will eventually sell all of the ac stuff too, but thats not taking up room like the bed/cab/ motor

>X< · 08-27-2004, 11:14 PM

free bedsides for hugger

>X< · 08-27-2004, 11:16 PM

they look really good in the pic, but i started sanding on the other one and it had tons of filler. the other one is covered in primer because i used to adjust my spray gun on it.

>X< · 08-27-2004, 11:18 PM

the 72 (back window sold a year ago to 70 cst)

>X< · 08-27-2004, 11:27 PM

more

**ScottH** · 08-27-2004, 11:57 PM

Thanks for the pics. Can u give me an idea on shipping costs of the four 8 lug wheels (minus tires) to 08753? Also would you be willing to sell posi carrier itself (what ratio?), and what about the BBC valve covers in the last pic?

Scott

mkmiller1 · 08-27-2004, 11:57 PM

Interested in the wheels, what is the size of the 8 lug wheels 15 or 16 and how wide? I could get Hugger to pick them up for me if they'll work.

thanks,
Matthew

If others before me pass on them.

zooza · 08-28-2004, 12:04 AM

what shape is the front bumper in? If its presentable i want it will you ship?n pm me with the details

dallas71 · 08-28-2004, 12:08 AM

I pm'd you....Interested in the 402...

incoma · 08-28-2004, 12:11 AM

Sorry, I was interested in the 6 lug rims. What part of Louisiana are you from? I might be able to pick them up.

Hotrodhenryj · 08-28-2004, 04:51 AM

What brand are the BB valve covers in the last pic sitting in front of the box? Interested if ScottH doesn't want that pair.

67ChevyC10Stepside · 08-28-2004, 05:36 AM

you said you have a 268h kit is that for SB or BB? im interested in that if its for SB.

**GSFMECH** · 08-28-2004, 07:35 AM

PM sent, need a tailgate

Tx Firefighter · 08-28-2004, 07:37 AM

I'd be interested in the 402 heads if you wanted to sell the pulleys and stuff off.

How far from the Texas border are you?

>X< · 08-28-2004, 08:41 AM

i dont have time to answer everything rightnow, bt i'm 2 minutes from Baton Rouge and i go to school in Hammond. i have to work all day today but i'll start geting shipping costs this evening. the valve covers are blasted, i tried to take the chrome off and messed up the alum. in some places, so i doubt anybody would want them.

>X< · 08-28-2004, 08:54 AM

comp k-kit is for a BB.

nobody needs a lwb bed?

tx firefighter, that sounds good, i'll get pics and we'll go from there

08-27-2004, 10:27 PM	#1
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,483	EVERYTHING MUST GO, (72 custom20, 462BB, some free parts) the 71 is almost done, just needs paint, so i am getting rid of everything. i am keeping my swb frame and the ac cab from the 72 for a frame up one day. 72 chevy lwb bed-good straight, diamond plate bedfloor-$500 72 lwb 3/4 frame with disc and dana 60 posi-make offer on all or some 2 fleet tailgates-free pair of swb bedsides, need work-free big ass diamond plate bumper for 72-$20 front chrome bumper for 72-$20 462 BB, bored, honed, built, 292 heads, decked, 3 angle valve job, ported, etc, new everything, fresh, never cranked. alum weiland intake, nice and oily on stand, included i will get the spec sheet tomorrow. no dist, carb, pulleys- $2500 402 bb, taken apart because of vent exhaust valve (from above truck) complete, ac comp rebuilt, all pulleys, $200 comp cams k kit, 268h cam, all the stuff, brand new in box with reciepts. i have to check the price in summit, but i want 100 less than what it sells for in summit. 4 alloy 8 lug rims with tires that hold air- $50 4 ugly alloy 6 lug rims with old tires-$10 if you think of anything that i might have on the 72 let me know. i might even sell the dash bezel and tilt, but i dont know yet. i will ship anything that i can, i mighteven drive some for the big stuff. i havent sold anything in years on here, but i have sold to 3 or 4 members. if it doesnt get sold it goes to the scrap. __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

08-27-2004, 10:27 PM	#2
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,483	oh yeah, i will post as many pics as you need by request __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

08-27-2004, 10:33 PM	#3
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	I'minterested in the 402, or at least all the pulleys and brackets, and the swb sides. I'll PM you. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

08-27-2004, 10:41 PM	#4
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Your pm box is full. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

08-27-2004, 10:41 PM	#5
gaddman Registered User Join Date: Apr 2001 Location: Scottsburg, In Posts: 160	Ditto on the 402 pullies and brackets...if Hugger doesn't take em. Greg __________________ Gaddman Scottsburg, In 67 SWB w/93 step bed 68 LWB Fleetside C10 Custom 50 Chevy 3600 74 Norton Commando 850 72 Norton Commando 750

08-27-2004, 10:51 PM	#6
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,483	i cleaned out my box. 402 goes all or nothing. if i sell the brackets alone nobody will ever want the 402. __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

08-27-2004, 10:52 PM	#7
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Can you give me a pic of the back side of the rims?

08-27-2004, 10:56 PM	#8
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,483	the 8 lug or the 6? i'll get a pic as soon as possible and post __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

08-27-2004, 11:05 PM	#9
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,185	Would like a pic of the 8 lug rims - SDELVY55@aol.com. Also, would u have ps setup for the big block? Thanks

08-27-2004, 11:14 PM	#11
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,483	free bedsides for hugger Attached Images __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

08-27-2004, 11:16 PM	#12
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,483	they look really good in the pic, but i started sanding on the other one and it had tons of filler. the other one is covered in primer because i used to adjust my spray gun on it. __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

08-27-2004, 11:18 PM	#13
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,483	the 72 (back window sold a year ago to 70 cst) Attached Images __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

08-27-2004, 11:27 PM	#14
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,483	more Attached Images __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

08-27-2004, 11:57 PM	#15
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,185	Thanks for the pics. Can u give me an idea on shipping costs of the four 8 lug wheels (minus tires) to 08753? Also would you be willing to sell posi carrier itself (what ratio?), and what about the BBC valve covers in the last pic? Scott

08-27-2004, 11:57 PM	#16
mkmiller1 Senior Member Join Date: Dec 2000 Location: Magnolia, Arkansas Posts: 1,091	Interested in the wheels, what is the size of the 8 lug wheels 15 or 16 and how wide? I could get Hugger to pick them up for me if they'll work. thanks, Matthew If others before me pass on them. __________________ GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles Last edited by mkmiller1; 08-27-2004 at 11:59 PM.



Register or Log In To remove these advertisements.

08-28-2004, 12:04 AM	#17
zooza Registered User Join Date: Jul 2004 Location: LINDEN, TN. Posts: 260	what shape is the front bumper in? If its presentable i want it will you ship?n pm me with the details

08-28-2004, 12:08 AM	#18
dallas71 Registered User Join Date: Mar 2004 Location: Corinth,TX Posts: 444	I pm'd you....Interested in the 402... __________________ My 1966 LWB Truck My 1966 SWB Truck Last edited by dallas71; 08-28-2004 at 12:18 AM.

08-28-2004, 12:11 AM	#19
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Sorry, I was interested in the 6 lug rims. What part of Louisiana are you from? I might be able to pick them up.

08-28-2004, 04:51 AM	#20
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	What brand are the BB valve covers in the last pic sitting in front of the box? Interested if ScottH doesn't want that pair. __________________ Arizona rust free sheetmetal

08-28-2004, 05:36 AM	#21
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	you said you have a 268h kit is that for SB or BB? im interested in that if its for SB. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

08-28-2004, 07:35 AM	#22
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	PM sent, need a tailgate

08-28-2004, 07:37 AM	#23
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	I'd be interested in the 402 heads if you wanted to sell the pulleys and stuff off. How far from the Texas border are you? __________________ I'm on the Instagram- @Gearhead_Kevin

08-28-2004, 08:41 AM	#24
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,483	i dont have time to answer everything rightnow, bt i'm 2 minutes from Baton Rouge and i go to school in Hammond. i have to work all day today but i'll start geting shipping costs this evening. the valve covers are blasted, i tried to take the chrome off and messed up the alum. in some places, so i doubt anybody would want them. __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

08-28-2004, 08:54 AM	#25
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,483	comp k-kit is for a BB. nobody needs a lwb bed? tx firefighter, that sounds good, i'll get pics and we'll go from there __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

Register or Log In To remove these advertisements.