68 c10 center link bar

[Bubbahotep]

I have a 1968 c10. When I purchased the truck it had already been lowered. Unfortunately the people who lowered it did so by simply cutting the springs down. I recently put new springs, shocks, and drop spindles. All the new parts are for a 1968 c10. I was unaware that the center link bar was from a newer model c10. I would like to find a center link for a 68 c10. Can anyone here help me find one?

[68c10airstream]

Welcome from the U.P. Someone will have what you need! I'm assuming the centerlink has larger holes for the inner tie rod ends than the new spindle tie rod end. I believe 73 and newer went to larger holes, but not sure. Good luck! PS if you do end up having trouble finding this part a friend may have what you need, but he is hard to get a hold of, and likes to hold on to things but at times does come through.

[Bubbahotep]

You are correct, the holes are just,slightly larger. I'm going to call around to some machine shops in the area and see if I can have it remachined to fit the smaller tierods but I would like to have the correct link bar instead.

[68Gold/white]

Although you have to be a paying member to do this (it isn't much...I believe) you could place a want to buy ad here. Should be tons available...

[Bubbahotep]

Thanks for the help but I found what I was look in for locally.

[Liz]

I moved this into the message board area. Hope you will decide to stay around.