how about some laid out longbeds - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brian69longbed · 11-16-2009, 11:41 PM

everyone has a laid out shortbed. lets see some longbeds!
here is mine in progress
looks much different now but you get the idea
POST YOUR LONGBED PICTURES!!
Name: 157.jpg
Views: 3758
Size: 35.6 KB

brian69longbed · 11-16-2009, 11:47 PM

here's another
Name: bcbv.jpg
Views: 3622
Size: 32.2 KB

royo · 11-18-2009, 06:16 PM

heres mine in progress drop spindles on now

oldblue1968chevy · 11-18-2009, 10:42 PM

looks sweeet!

wish I was talented enough to do this lol..

70RedBlurr · 11-20-2009, 02:50 AM

Here is mine puts the lower controls arm on the ground and carrier bearing cross member on the ground too.

jrods70 · 11-20-2009, 03:28 AM

this is my 70 lwb

**FRENCHBLUE72** · 11-20-2009, 03:58 PM

Heres mine almost all the way down....

royo · 11-21-2009, 10:26 AM

Cool I love me some longbeds a very long time too lol

Hottrucks · 11-21-2009, 11:04 AM

best I can do and still work it like a truck..I need bed space to haul my camper and fire wood...Now that I added some bling I guess I need to get a coulpe new pozer pics

*project 67 sub* · 11-21-2009, 02:41 PM

haha thats sweet Hottrucks

scotts62 · 11-21-2009, 03:29 PM

Cool! this is going to be a good thread, Subscribed

chevydog66 · 11-23-2009, 10:40 PM

Here's my 72 GMC, it's not laid out but it's a long bed. It's as low as I can go without choppin stuff up.

**kev2809** · 11-23-2009, 11:43 PM

[quote=70RedBlurr;3629818]Here is mine puts the lower controls arm on the ground and carrier bearing cross member on the ground too.

Quote:

Originally Posted by jrods70

this is my 70 lwb

damn these are nice, whats the suspension info on both of these?

70RedBlurr · 11-24-2009, 02:36 AM

Kev2809, My suspension is cupped lower control arms, swap to disc brakes from a '76 truck, RE-6's, top plates, and finished the front off with DJM three inch lowering spindles. The rear is a Air Ride Tech. triangulated four link, FBI notch, and RE-7's.

Here's a pic of the rear. kinda hard to see but all I have on my laptop.

jrods70 · 11-24-2009, 03:21 AM

i have stock trailing arms in back with sleeve bag with watts link, front is 3 inch drop spindles cut lca 2inch zed frame and 1inch section crossmember with slam re7 and notched the uca to clear steering shaft

Ghostwhite · 05-16-2010, 10:07 AM

more...... plz? :-)

texastrendz · 05-16-2010, 02:58 PM

mine before i hung it up on a man hole.

NZSquare · 05-16-2010, 04:58 PM

Love the pics, especially the red one, I saw a pic of it on here last year and it was just the kick in the backside I needed to get moving on mine. Super clean.

Heres mine, again not quite laid out, its sitting on bumpstops though. Its about to get 20" steelies and a chopped front crossmember, so then she'll be down good and hard.

The whitewalls are painted on, the back one looks humped as I had the exhaust dumping in front of it.

andrewmp6 · 05-17-2010, 02:28 AM

Texastrendz you should change it to a line for each bag in case something gives you don't have one end just drop on you.

-dylan-(OO==|==OO) · 05-17-2010, 04:46 PM

Quote:

Originally Posted by Hottrucks

best I can do and still work it like a truck..I need bed space to haul my camper and fire wood...Now that I added some bling I guess I need to get a coulpe new pozer pics

wow nice truck... wat suspension parts did u use//

texastrendz · 05-17-2010, 07:16 PM

man that is 3000 psi steel braided hydraulic hose, it will cut through the metal before the metal cuts the hose. i will never have a failure with this setup. all my trucks i do i use hydraulic hose. and no leaks either. lol. it is expensive to use. but i like the insurance of it.

**kev2809** · 05-17-2010, 07:39 PM

is that hose from like a big rig shop?

edit - what kind of panhard bar is that?

Southcity · 05-17-2010, 08:02 PM

Quote:

Originally Posted by Hottrucks

best I can do and still work it like a truck..I need bed space to haul my camper and fire wood...Now that I added some bling I guess I need to get a coulpe new pozer pics

A truck that still works like a truck, and a Longbed to boot.....hats off to you Hottrucks!!

86er · 05-17-2010, 08:41 PM

Here is the 86er..

Hottrucks · 05-17-2010, 09:01 PM

well I said I would get you some current pics

11-16-2009, 11:41 PM	#1
brian69longbed Registered User Join Date: Nov 2008 Location: chino ca Posts: 215	how about some laid out longbeds everyone has a laid out shortbed. lets see some longbeds! here is mine in progress looks much different now but you get the idea POST YOUR LONGBED PICTURES!! __________________ 69' 1/2 ton LONGBED__ _______ \|__\__ \|__(O)______(O)] My build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=354115

11-16-2009, 11:47 PM	#2
brian69longbed Registered User Join Date: Nov 2008 Location: chino ca Posts: 215	Re: how about some laid out longbeds here's another __________________ 69' 1/2 ton LONGBED__ _______ \|__\__ \|__(O)______(O)] My build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=354115

11-18-2009, 06:16 PM	#3
royo Registered User Join Date: Feb 2007 Location: knoxville tn Posts: 1,013	Re: how about some laid out longbeds heres mine in progress drop spindles on now __________________ nickle and dime Last edited by royo; 05-21-2010 at 10:24 AM.

11-18-2009, 10:42 PM	#4
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: how about some laid out longbeds looks sweeet! wish I was talented enough to do this lol.. __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

11-20-2009, 02:50 AM	#5
70RedBlurr Registered User Join Date: Dec 2007 Location: Central Coast Posts: 77	Re: how about some laid out longbeds Here is mine puts the lower controls arm on the ground and carrier bearing cross member on the ground too.

11-20-2009, 03:28 AM	#6
jrods70 Registered User Join Date: Oct 2006 Location: fort collins co Posts: 22	Re: how about some laid out longbeds this is my 70 lwb Attached Images

11-20-2009, 03:58 PM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: how about some laid out longbeds Heres mine almost all the way down.... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-21-2009, 10:26 AM	#8
royo Registered User Join Date: Feb 2007 Location: knoxville tn Posts: 1,013	Re: how about some laid out longbeds Cool I love me some longbeds a very long time too lol __________________ nickle and dime

11-21-2009, 11:04 AM	#9
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: how about some laid out longbeds best I can do and still work it like a truck..I need bed space to haul my camper and fire wood...Now that I added some bling I guess I need to get a coulpe new pozer pics Attached Images

11-21-2009, 02:41 PM	#10
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: how about some laid out longbeds haha thats sweet Hottrucks

11-21-2009, 03:29 PM	#11
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: how about some laid out longbeds Cool! this is going to be a good thread, Subscribed __________________ Scott 93 crew cab build Project 62

11-23-2009, 10:40 PM	#12
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: how about some laid out longbeds Here's my 72 GMC, it's not laid out but it's a long bed. It's as low as I can go without choppin stuff up. Attached Images __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

11-24-2009, 02:36 AM	#14
70RedBlurr Registered User Join Date: Dec 2007 Location: Central Coast Posts: 77	Re: how about some laid out longbeds Kev2809, My suspension is cupped lower control arms, swap to disc brakes from a '76 truck, RE-6's, top plates, and finished the front off with DJM three inch lowering spindles. The rear is a Air Ride Tech. triangulated four link, FBI notch, and RE-7's. Here's a pic of the rear. kinda hard to see but all I have on my laptop.

11-24-2009, 03:21 AM	#15
jrods70 Registered User Join Date: Oct 2006 Location: fort collins co Posts: 22	Re: how about some laid out longbeds i have stock trailing arms in back with sleeve bag with watts link, front is 3 inch drop spindles cut lca 2inch zed frame and 1inch section crossmember with slam re7 and notched the uca to clear steering shaft Attached Images Last edited by jrods70; 11-24-2009 at 03:23 AM.

05-16-2010, 10:07 AM	#16
Ghostwhite Squarebody guy Join Date: Apr 2009 Location: Minnesota Posts: 335	Re: how about some laid out longbeds more...... plz? :-)



Register or Log In To remove these advertisements.

05-16-2010, 02:58 PM	#17
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: how about some laid out longbeds mine before i hung it up on a man hole.

05-16-2010, 04:58 PM	#18
NZSquare Registered User Join Date: Oct 2008 Location: Queenstown Posts: 132	Re: how about some laid out longbeds Love the pics, especially the red one, I saw a pic of it on here last year and it was just the kick in the backside I needed to get moving on mine. Super clean. Heres mine, again not quite laid out, its sitting on bumpstops though. Its about to get 20" steelies and a chopped front crossmember, so then she'll be down good and hard. The whitewalls are painted on, the back one looks humped as I had the exhaust dumping in front of it. Last edited by NZSquare; 05-16-2010 at 05:03 PM. Reason: spelling

05-17-2010, 02:28 AM	#19
andrewmp6 Registered User Join Date: Jan 2009 Location: Louisville,Ky Posts: 5,811	Re: how about some laid out longbeds Texastrendz you should change it to a line for each bag in case something gives you don't have one end just drop on you.

05-17-2010, 07:16 PM	#21
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: how about some laid out longbeds man that is 3000 psi steel braided hydraulic hose, it will cut through the metal before the metal cuts the hose. i will never have a failure with this setup. all my trucks i do i use hydraulic hose. and no leaks either. lol. it is expensive to use. but i like the insurance of it.

05-17-2010, 07:39 PM	#22
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,134	Re: how about some laid out longbeds is that hose from like a big rig shop? edit - what kind of panhard bar is that? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 05-17-2010 at 07:40 PM.

05-17-2010, 08:41 PM	#24
86er Registered User Join Date: Feb 2010 Location: Newton,Iowa Posts: 72	Re: how about some laid out longbeds Here is the 86er.. Attached Images

05-17-2010, 09:01 PM	#25
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: how about some laid out longbeds well I said I would get you some current pics Attached Images

Register or Log In To remove these advertisements.