Dave kindig Chevy blazer - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 11-05-2016, 07:33 AM

I agree. I question a lot on it, too. First, why didn't they check with me before going ahead with anything?? It would be a nice Blazer if it was complete. But, it sucks because they left the tin cover off under the steering column. OMG, what were they thinking? I wouldn't pay more than $65k because of that. Like I said, they should have checked with me. I would have advised they chromed one and installed it. That's how I always did my custom builds back when I was hot and heavy into it. But that was before the internet and cable/satellite TV expanded programming. Mostly, I think they should have given me the show and called it "Tim's Rides".

**Boog** · 11-05-2016, 07:57 AM

I like Kindig's show more than some. But I think most all of us would prefer to see more building and less attempts at humor and ridiculous arguing and stupid antics on all the shows.
Finally Ass Monkeys has calmed down some and it's a better show for it. IMO.

**leddzepp** · 11-05-2016, 11:31 AM

Quote:

Originally Posted by CG

Well that didn't take too long

It never does...

**67cheby** · 11-05-2016, 11:36 AM

and i am just over here pumped because its running my Slosh Tubz and filler panels!!! LOVE IT

**clay68c10** · 11-05-2016, 12:50 PM

I can also vouch for the Kindig crew, I've met a several of them a few times at shows here and they are all willing to talk to anyone, kids, whom ever. No douchey attitudes, nice folks.
That's a nice Blazer, maybe not the exact way I'd want it, but it sure would look nice in my garage.

bmfm64 · 11-05-2016, 01:04 PM

Does anyone know what gauges they are running in this? I want to run factory gauges on my LS.

del4fun · 11-08-2016, 06:03 PM

Quote:

Originally Posted by iGreek

Got some higher quality screenshots off my phone of it

Great photos

**jeffahart** · 11-08-2016, 09:03 PM

Real nice, I like it a lot, I would be proud of that work if I did it. And they do seem like nice guys, glad to hear they are.

But... here it comes! You can smoke a cigar in my truck... something had to be better about my truck... I'm just that way!!!

**c3vette4spd** · 06-26-2017, 11:39 PM

Met Dave at Barrett Jackson 2016. He's a great guy from what I could tell!

midniteblues · 06-27-2017, 11:21 AM

I haven't seen this episode yet but I have seen episodes with the blazer lurking in the back ground.

I think they do a great job on just about every vehicle.and there is a few they knocked outa the park.
Full out customs isn't usually my thing but I'm not gonna knock it.

It looks to me that the blazer don't have any seat belts...hmmm, just a observation.

harpo231 · 06-27-2017, 11:34 AM

Kindig been stuck on tucking bumper and tan interiors for too long IMHO

RustyBucket · 06-27-2017, 12:03 PM

I was kinda disappointed in them when they whacked the '49/'50 Suburban up and made a uni-body pickup out of it.

toolboxchev · 06-27-2017, 12:23 PM

Yea well for 75k it has to have SOMETHING wrongy with it.

Man thats custom work, you do anything by hand there is bound to be a flaw somewhere.

I can see the bug speck in the paint under the wheel well.
sheesh!

leftybass209 · 06-27-2017, 01:05 PM

Quote:

Originally Posted by RustyBucket

I was kinda disappointed in them when they whacked the '49/'50 Suburban up and made a uni-body pickup out of it.

I was disappointed too, that I didn't own it.

Top quality builds and good guys to talk to. This was from a magazine article a few years ago regarding costs
"We have many people asking about starting prices for Kindigit work: Their shop rate is $65.00 per hour plus materials. An average build at our shop starts at $250K depending on the condition of the vehicle and what components you would like to upgrade to. Feel free to give Kevin a call here at the shop Monday – Friday 9-5 (MST) to discuss your project further."

Blazer for 75K? I'd say they cut some corners and hours based on the quality of work they normally do.

Yes, please!!!!

weq92f · 06-27-2017, 01:43 PM

Quote:

Originally Posted by leftybass209

Blazer for 75K? I'd say they cut some corners and hours based on the quality of work they normally do.

More likely they took a paper loss because the only person willing to go 250k minimum for that truck would be the guy who had the vision and money to hire Kindig to build it fresh in the first place.

If Kindig built it for a "shop truck" or for his own desire, no way it would ever sell for what he had in it. Somebody got a steal at 75k if it really does take a quarter million worth of parts and labor to build it up.

-klb

timski69gmc · 06-27-2017, 03:00 PM

That blazer turned out great. White interior looks good but too much maintenance for me. Pretty sure the original owner of the blazer was on the board here somewhere. I think the green was an Isuzu Color. I'll definitely be borrowing some ideas for mine.

11-05-2016, 07:33 AM	#26
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Dave kindig Chevy blazer I agree. I question a lot on it, too. First, why didn't they check with me before going ahead with anything?? It would be a nice Blazer if it was complete. But, it sucks because they left the tin cover off under the steering column. OMG, what were they thinking? I wouldn't pay more than $65k because of that. Like I said, they should have checked with me. I would have advised they chromed one and installed it. That's how I always did my custom builds back when I was hot and heavy into it. But that was before the internet and cable/satellite TV expanded programming. Mostly, I think they should have given me the show and called it "Tim's Rides". __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-05-2016, 07:57 AM	#27
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 12,959	Re: Dave kindig Chevy blazer I like Kindig's show more than some. But I think most all of us would prefer to see more building and less attempts at humor and ridiculous arguing and stupid antics on all the shows. Finally Ass Monkeys has calmed down some and it's a better show for it. IMO. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

11-05-2016, 11:36 AM	#29
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Dave kindig Chevy blazer and i am just over here pumped because its running my Slosh Tubz and filler panels!!! LOVE IT __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-05-2016, 12:50 PM	#30
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,895	Re: Dave kindig Chevy blazer I can also vouch for the Kindig crew, I've met a several of them a few times at shows here and they are all willing to talk to anyone, kids, whom ever. No douchey attitudes, nice folks. That's a nice Blazer, maybe not the exact way I'd want it, but it sure would look nice in my garage. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

11-05-2016, 01:04 PM	#31
bmfm64 Registered User Join Date: May 2011 Location: Covington, Wa Posts: 5,240	Re: Dave kindig Chevy blazer Does anyone know what gauges they are running in this? I want to run factory gauges on my LS.

11-08-2016, 09:03 PM	#33
jeffahart Senior Member Join Date: May 2012 Location: Scottsdale, AZ Posts: 1,883	Re: Dave kindig Chevy blazer Real nice, I like it a lot, I would be proud of that work if I did it. And they do seem like nice guys, glad to hear they are. But... here it comes! You can smoke a cigar in my truck... something had to be better about my truck... I'm just that way!!! __________________ White K20

06-26-2017, 11:39 PM	#34
c3vette4spd Registered User Join Date: Apr 2011 Location: Lerna Illinois Posts: 64	Re: Dave kindig Chevy blazer Met Dave at Barrett Jackson 2016. He's a great guy from what I could tell! Attached Images __________________ JASON 1972 Cheyenne SWB (402/400, tilt) 1972 GMC Sierra LWB (402/400, tach, tilt)

06-27-2017, 11:21 AM	#35
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: Dave kindig Chevy blazer I haven't seen this episode yet but I have seen episodes with the blazer lurking in the back ground. I think they do a great job on just about every vehicle.and there is a few they knocked outa the park. Full out customs isn't usually my thing but I'm not gonna knock it. It looks to me that the blazer don't have any seat belts...hmmm, just a observation. __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.

06-27-2017, 11:34 AM	#36
harpo231 Registered User Join Date: Nov 2014 Location: Lincoln City DE Posts: 1,292	Re: Dave kindig Chevy blazer Kindig been stuck on tucking bumper and tan interiors for too long IMHO

06-27-2017, 12:03 PM	#37
RustyBucket Registered User Join Date: Jul 2009 Location: Space Coast, Fl. Posts: 1,050	Re: Dave kindig Chevy blazer I was kinda disappointed in them when they whacked the '49/'50 Suburban up and made a uni-body pickup out of it. __________________ Dad always said, "Son, WISH IN ONE HAND, and ......." -------------------------------------- -------------------------------------- Current toy trucks: '71 GMC 1500 SUPER CUSTOM short/step, orig. dk. blue, 350/700r, ps,pb, A/C '72 Blazer 2wd, ochre & white, 454, tremecTKO 500 5spd. ps, pb, A/C, tilt Last 10yrs of hobby vehicles, had a FEW more in the 50yrs. before these: '66 Plymouth Belvedere City of Miami cop car clone. '70 Nova 406"sb, 13.5-1, solid roller, Brodix, p.glide/t.brake, back halved, 9" Ford, spool 4.88, cage,ladder bar/coilover, 10.5 tire....... SOLD!! '67 C10 short/step side mount spare -- SOLD!! '72 Jimmy 2wd, 350/350, ps, pb, fun driver, lots of bondo & a shiny red paint job..... SOLD!! '69 Nova 350, 4spd, A/C, ps, p.b, ...SOLD!!

06-27-2017, 12:23 PM	#38
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: Dave kindig Chevy blazer Yea well for 75k it has to have SOMETHING wrongy with it. Man thats custom work, you do anything by hand there is bound to be a flaw somewhere. I can see the bug speck in the paint under the wheel well. sheesh!

06-27-2017, 03:00 PM	#41
timski69gmc Registered User Join Date: Nov 2009 Location: Cranbrook, BC Posts: 253	Re: Dave kindig Chevy blazer That blazer turned out great. White interior looks good but too much maintenance for me. Pretty sure the original owner of the blazer was on the board here somewhere. I think the green was an Isuzu Color. I'll definitely be borrowing some ideas for mine.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.