1963 C10 SWB Big Window Build - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DRTYRAT30 · 10-12-2010, 08:27 PM

Whats up Jason, You know i always have to have some project going on to keep me out of trouble

RenoJason · 10-12-2010, 08:38 PM

I here you on the trouble part. I defiantly want to check out those PB parts that you used. Don't know if i really want to bring Jake now ill have to listen to his mouth about not doing anything to the 66 that i have had for the last 10 years.

DRTYRAT30 · 10-14-2010, 09:27 PM

Getting the engine and trans ready 350/350

c10Mang · 10-14-2010, 09:33 PM

Quote:

Originally Posted by drtyrat30

getting the engine and trans ready 350/350

nice!!

Dinos63 · 10-15-2010, 12:48 AM

duude nice bullet!

franky69c10 · 10-15-2010, 03:54 AM

Posted via Mobile Device

boat · 10-15-2010, 05:23 PM

looking good

Delmo · 10-15-2010, 05:34 PM

Dig the finned covers, looks good man. Get that thing done for Scottsdale.

DRTYRAT30 · 10-15-2010, 07:07 PM

Thanks guys.. Scottsdale would be one hell of a 12 hour shake down ride. We were just in Pheonix in June, i should of stopped by Dino's to stare at some of his rides...

Dinos63 · 10-15-2010, 11:17 PM

Quote:

Originally Posted by DRTYRAT30

Thanks guys.. Scottsdale would be one hell of a 12 hour shake down ride. We were just in Pheonix in June, i should of stopped by Dino's to stare at some of his rides...

man jessie you should come down meet delmo and roll in together, any were close to az if ya have any problems i come get ya, how sic would that be at goodguys

**FRENCHBLUE72** · 10-16-2010, 12:11 PM

Nice work looks like you dont waste anytime..

custom63 · 10-16-2010, 03:27 PM

Beautilful Work!!
Nice to see another N. Cal. 63 in the area. Mine is much to be desired right now.... since I had my daughter I havent been able to work on my 63 in many months. Looking over your thread really builds the motivation factor though. Keep up the great work!

64shortc10 · 10-21-2010, 03:17 PM

Anything new to post on this awesome build?
It's looking great, keep it up!
Tony from Norcal
Posted via Mobile Device

m6z · 10-21-2010, 04:33 PM

Quote:

Originally Posted by DRTYRAT30

Getting the engine and trans ready 350/350

Did you get the valve covers and air cleaner from the guy on ebay? If not where did you buy them? Good quality?

Preacherman5555 · 10-21-2010, 04:57 PM

nice work

DRTYRAT30 · 10-21-2010, 06:50 PM

Not much going on, ive been sick for a few days, Should get going on it soon.

The air cleaner w/ washable filter was from noahperformance on ebay.
And the valve covers were from abad71camaro. Both are nice quality.

Thanks, Jesse

DRTYRAT30 · 10-21-2010, 07:21 PM

fryer1979 · 10-21-2010, 10:57 PM

Man, that pickup of your's sure is coming along quickly and nicely. Can't wait to see it together and driving.

DRTYRAT30 · 10-25-2010, 09:28 PM

Thanks, Well i got the engine and trans in today. Very nice fit, no issues.

kiknrocks · 10-25-2010, 09:56 PM

wow that looks sweet.

Dinos63 · 10-25-2010, 11:35 PM

killer photo!! dude such nice nice work jesse

irish1966 · 10-25-2010, 11:52 PM

Quote:

Originally Posted by DRTYRAT30

Thanks, Well i got the engine and trans in today. Very nice fit, no issues.

Screw Da Vinci. That is a thing of beauty!!! You should be very proud of that and of the pics. If u ever get tired of trucks at least u have photography to fall back on. Lol.

**Dan in Pasadena** · 10-26-2010, 12:19 AM

Quote:

Originally Posted by DRTYRAT30

Just the rubber clamps in 3/16" and a pop-rivet. They worked very well for me.

Sorry for the delay in getting back to this thread. Pop rivets? I never would have thunk it! lol.

Any chance of a couple of close up pic's of the clamps and the rivets in place?

Mad Rods · 10-26-2010, 12:56 AM

Looking awesome bro!!! Saw your video on YouTube ... What brand are those headers? For camaro/chevelle?
Posted via Mobile Device

PipsC10 · 10-26-2010, 11:10 AM

sometimes its really hard to gather ideas in your head and have them all blend together nicely when you actually start putting things together. Your build is a perfect example so far of things coming together that work well both cosmetically and mechanically. Awesome job

10-12-2010, 08:27 PM	#176
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: 1963 C10 SWB Big Window Build Whats up Jason, You know i always have to have some project going on to keep me out of trouble

10-12-2010, 08:38 PM	#177
RenoJason Registered User Join Date: Sep 2010 Location: Reno,NV Posts: 9	Re: 1963 C10 SWB Big Window Build I here you on the trouble part. I defiantly want to check out those PB parts that you used. Don't know if i really want to bring Jake now ill have to listen to his mouth about not doing anything to the 66 that i have had for the last 10 years.

10-14-2010, 09:27 PM	#178
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: 1963 C10 SWB Big Window Build Getting the engine and trans ready 350/350

10-15-2010, 12:48 AM	#180
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: 1963 C10 SWB Big Window Build duude nice bullet! __________________ CHEVY ONLY... Nothin Else !

10-15-2010, 03:54 AM	#181
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: 1963 C10 SWB Big Window Build Posted via Mobile Device __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

10-15-2010, 05:23 PM	#182
boat Registered User Join Date: Apr 2010 Location: bartlett Tn Posts: 276	Re: 1963 C10 SWB Big Window Build looking good

10-15-2010, 05:34 PM	#183
Delmo Registered User Join Date: Feb 2003 Location: Burbank CA Posts: 1,226	Re: 1963 C10 SWB Big Window Build Dig the finned covers, looks good man. Get that thing done for Scottsdale.

10-15-2010, 07:07 PM	#184
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: 1963 C10 SWB Big Window Build Thanks guys.. Scottsdale would be one hell of a 12 hour shake down ride. We were just in Pheonix in June, i should of stopped by Dino's to stare at some of his rides...

10-16-2010, 12:11 PM	#186
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: 1963 C10 SWB Big Window Build Nice work looks like you dont waste anytime.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

10-16-2010, 03:27 PM	#187
custom63 Registered User Join Date: Oct 2008 Location: Auburn, Ca. Posts: 171	Re: 1963 C10 SWB Big Window Build Beautilful Work!! Nice to see another N. Cal. 63 in the area. Mine is much to be desired right now.... since I had my daughter I havent been able to work on my 63 in many months. Looking over your thread really builds the motivation factor though. Keep up the great work! __________________ Tommy~ The difference between genius and stupidity is that genius has its limits -- Albert Einstein 63 build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=317341

10-21-2010, 03:17 PM	#188
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: 1963 C10 SWB Big Window Build Anything new to post on this awesome build? It's looking great, keep it up! Tony from Norcal Posted via Mobile Device

10-21-2010, 04:57 PM	#190
Preacherman5555 Registered User Join Date: Jan 2010 Location: Godendale WA. Posts: 105	Re: 1963 C10 SWB Big Window Build nice work

10-21-2010, 06:50 PM	#191
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: 1963 C10 SWB Big Window Build Not much going on, ive been sick for a few days, Should get going on it soon. The air cleaner w/ washable filter was from noahperformance on ebay. And the valve covers were from abad71camaro. Both are nice quality. Thanks, Jesse

10-21-2010, 07:21 PM	#192
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: 1963 C10 SWB Big Window Build

10-21-2010, 10:57 PM	#193
fryer1979 Redneck Hillbilly Join Date: Jan 2010 Location: Backwoods Posts: 1,307	Re: 1963 C10 SWB Big Window Build Man, that pickup of your's sure is coming along quickly and nicely. Can't wait to see it together and driving.



Register or Log In To remove these advertisements.

10-25-2010, 09:28 PM	#194
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: 1963 C10 SWB Big Window Build Thanks, Well i got the engine and trans in today. Very nice fit, no issues.

10-25-2010, 09:56 PM	#195
kiknrocks 65 Chevy Join Date: Nov 2009 Location: LODI Ca Posts: 144	Re: 1963 C10 SWB Big Window Build wow that looks sweet.

10-25-2010, 11:35 PM	#196
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: 1963 C10 SWB Big Window Build killer photo!! dude such nice nice work jesse __________________ CHEVY ONLY... Nothin Else ! Last edited by Dinos63; 10-25-2010 at 11:36 PM.

10-26-2010, 12:56 AM	#199
Mad Rods Chevy Only Tx Join Date: May 2009 Location: Pecos,Tx Posts: 1,061	Re: 1963 C10 SWB Big Window Build Looking awesome bro!!! Saw your video on YouTube ... What brand are those headers? For camaro/chevelle? Posted via Mobile Device __________________ Chevy Only Tx.........

10-26-2010, 11:10 AM	#200
PipsC10 Registered User Join Date: Jan 2008 Location: Oakdale, Ca Posts: 655	Re: 1963 C10 SWB Big Window Build sometimes its really hard to gather ideas in your head and have them all blend together nicely when you actually start putting things together. Your build is a perfect example so far of things coming together that work well both cosmetically and mechanically. Awesome job __________________ 1970 2wd short/fleet 350/350 Project "iced green dream" http://67-72chevytrucks.com/vboard/s...d.php?t=272702 2006 Toyota Tacoma double cab 4x4

Register or Log In To remove these advertisements.