KS Road Draft Tube Fitting - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 01-19-2017, 05:04 PM

Hard to find item, most get thrown away. Used on pre-PCV engines to remove crankcase pressure & fumes. Nice, no dents but needs cleaning. Comes with mount bolt. $12 shipped, money order, do not have Paypal.

**mrtoni** · 01-19-2017, 07:25 PM

I will take this. Pm me address and will get postal mo tomorrow. Thanks

**Ironhorse** · 01-19-2017, 09:17 PM

Quote:

Originally Posted by mrtoni

I will take this. Pm me address and will get postal mo tomorrow. Thanks

Fitting SOLD to mrtoni PM sent with payment info. Thanks for the purchase.

**mrtoni** · 01-20-2017, 01:06 AM

Pm received. Thamks

**Ironhorse** · 02-06-2017, 05:40 PM

Quote:

Originally Posted by mrtoni

Pm received. Thamks

PM sent

**Ironhorse** · 02-10-2017, 10:22 AM

Quote:

Originally Posted by mrtoni

I will take this. Pm me address and will get postal mo tomorrow. Thanks

Still have not heard from you, have not received payment after sending payment info, sent 3 PMs and 1 instant message with no reply although have seen you on the forums. Guess not wanting the fitting, will relist at a future time.

Brad54 · 02-10-2017, 06:56 PM

I'll take it, and can PayPal right away. (well, within 24 hours... heading to a movie and dinner, and if all goes well... I'll "be away from the computer" for the rest of the evening.

But I can get you paid tomorrow.

-Brad

**Ironhorse** · 02-10-2017, 07:00 PM

Brad, as mentioned in the first thread I don't have a Paypal account. I use money orders when buying and selling on the 'net. If that works for you let me know and I will PM you mailing info. Thanks for the interest,

Brad54 · 02-11-2017, 09:21 PM

Money order or check definitely works for me.
Send me a PM

**Ironhorse** · 02-11-2017, 11:15 PM

Quote:

Originally Posted by Brad54

Money order or check definitely works for me.
Send me a PM

Road Draft Fitting SOLD to Brad54, PM sent with info. Thanks for the purchase,

**Ironhorse** · 02-17-2017, 03:49 PM

Quote:

Originally Posted by Brad54

Money order or check definitely works for me.
Send me a PM

Brad, have not heard from you after sent PM with payment info, still want the road draft fitting?

**Ironhorse** · 02-23-2017, 09:59 PM

Brad, received payment, sent you a PM but your box is full. Need to make some room, LOL.

Brad54 · 02-24-2017, 12:05 AM

Cleaned out!
Thanks... this will go on the pile o' parts I've got for a 4-inch bore 283 race engine (301ci).

-Brad

**Ironhorse** · 02-24-2017, 12:17 AM

Quote:

Originally Posted by Brad54

Cleaned out!
Thanks... this will go on the pile o' parts I've got for a 4-inch bore 283 race engine (301ci).

-Brad

Brad, tried again to send PM and got the same PMs full message. Also as I have a bead blast cabinet in the shop "if" you like I will blast the fitting before shipment. Let me know on that, will wait to ship until I hear from you on the bead blast.

Brad54 · 02-24-2017, 12:37 PM

Quote:

Originally Posted by Ironhorse

Brad, tried again to send PM and got the same PMs full message. Also as I have a bead blast cabinet in the shop "if" you like I will blast the fitting before shipment. Let me know on that, will wait to ship until I hear from you on the bead blast.

HA! Yeah, just went through and dumped a bunch of PMs... should be good for a while now.

If you're blasting some things already, that'd be cool to throw the fitting in as well, but don't make a special trip to the blast cabinet for it. Hopefully (!) I'll have my blast cabinet up and running by the time I get around to building the 301!

-Brad

**ChiefRocka** · 02-24-2017, 01:03 PM

Wow .... its tough to sell something sold around this place ....

01-19-2017, 05:04 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,021	Road Draft Tube Fitting Hard to find item, most get thrown away. Used on pre-PCV engines to remove crankcase pressure & fumes. Nice, no dents but needs cleaning. Comes with mount bolt. $12 shipped, money order, do not have Paypal. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-19-2017, 07:25 PM	#2
mrtoni Senior Member Join Date: Jan 2009 Location: sparks, nevada Posts: 1,879	Re: Road Draft Tube Fitting I will take this. Pm me address and will get postal mo tomorrow. Thanks

01-20-2017, 01:06 AM	#4
mrtoni Senior Member Join Date: Jan 2009 Location: sparks, nevada Posts: 1,879	Re: Road Draft Tube Fitting Pm received. Thamks

02-10-2017, 06:56 PM	#7
Brad54 Registered User Join Date: Aug 2006 Location: Athens, Georgia Posts: 1,456	Re: Road Draft Tube Fitting I'll take it, and can PayPal right away. (well, within 24 hours... heading to a movie and dinner, and if all goes well... I'll "be away from the computer" for the rest of the evening. But I can get you paid tomorrow. -Brad __________________ '61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School

02-10-2017, 07:00 PM	#8
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,021	Re: Road Draft Tube Fitting Brad, as mentioned in the first thread I don't have a Paypal account. I use money orders when buying and selling on the 'net. If that works for you let me know and I will PM you mailing info. Thanks for the interest, __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

02-11-2017, 09:21 PM	#9
Brad54 Registered User Join Date: Aug 2006 Location: Athens, Georgia Posts: 1,456	Re: Road Draft Tube Fitting Money order or check definitely works for me. Send me a PM __________________ '61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School

02-23-2017, 09:59 PM	#12
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,021	Re: Road Draft Tube Fitting Brad, received payment, sent you a PM but your box is full. Need to make some room, LOL. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

02-24-2017, 12:05 AM	#13
Brad54 Registered User Join Date: Aug 2006 Location: Athens, Georgia Posts: 1,456	Re: Road Draft Tube Fitting Cleaned out! Thanks... this will go on the pile o' parts I've got for a 4-inch bore 283 race engine (301ci). -Brad __________________ '61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School

02-24-2017, 01:03 PM	#16
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: Road Draft Tube Fitting Wow .... its tough to sell something sold around this place .... __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.