OR Parting out 72 GMC K20 4x4 350-TH350 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DeadheadNM** · 01-20-2014, 10:38 PM

Quote:

Originally Posted by tll74

Pete, yes it was a D60. Would it matter? Wouldn't this portion be the same? I have a couple HO72 4x4's that I could compare it. Thanks, Tom

Tom - I'll take the hanger and speedo cable for sure shipped to 59901. I could be completely wrong on the e-brake cable Dana 60 vs. HO52 being different - it may be same but being different rear ends I thought the cables may differ. Pete

**karphan** · 01-20-2014, 11:01 PM

I'll take the steering rag joint. Pm sent for payment info. Thanks, Dan

**tll74** · 01-21-2014, 01:34 AM

jimer1964..I'll get shipping cost tomorrow.

CUSTOM/10 Gary, It has no extra holes and some minor surface rust on the underside as the pic shows. In my opinion it is a very nice piece.

DeadheadNM Pete, Just home from the shop. The cables coming out of the backing plates may be different but i'm thinking the rest is the same. I'll look at my 72 K20 HO72 in the morning. To cold and dark tonight.

John H. · 01-21-2014, 01:51 AM

Can I get closer pictures of the rubber bushings for the transfer case support? Also, can I get the two large bolts on the transfer case that go through the support bracket?

**tll74** · 01-21-2014, 03:05 AM

more pics

68shortfleet · 01-21-2014, 03:16 AM

Is the rear crossmember the same for 1/2 2wd and 3/4 4x4?

Would you do $40 shipped to 97115 on the crossmember?

blackbolt · 01-21-2014, 04:36 AM

I'll take the trans crossmember and the trans mounts pm me details of payment thanks JJ

**CUSTOM/10** · 01-21-2014, 06:31 AM

I'll take the Tunnel cover and a good 72 DS door relay if you have one. PM me the total & payment info when your ready.

Gary

John H. · 01-21-2014, 10:08 AM

After seeing the closer pics of the TC support, I would like to take it if I am up. I would like the two mounting in the TC too. If the transfer case mounting bushings get to me I will take those too.

Any exhaust manifolds?

**karphan** · 01-21-2014, 10:57 AM

Payment made for the steering rag joint. PM'd address too. Thanks, Dan

**jmader** · 01-21-2014, 02:53 PM

Are you selling the cab?

mx289 · 01-21-2014, 07:48 PM

Quote:

Originally Posted by tll74

Shipping is via UPS and is actual cost. I have a daily pick up so that's what works for me. USPS on small items in flat rate boxes and or padded envelopes.

gmclonghorn, pm coming

gmc 2500 4x4 Paul, No..that's the 72 Sub K20. I will have it this Friday. Don't worry your in first place on them.

CUSTOM/10 Gary, nothing on the upper rad pipe. I Should have the relay 10.00 for a good one.

dec010974, Nothing right now on the sport rear bumper brackets.

DeadheadNM Pete, I can't recall. Let me look on the frame chunks. I'll start a pile for you.

mx289,The RH is a nice driver with a screw hole at the very bottom tip, 20.00. The LH is rusty towards the top 5.00. I plan to keep the t-case support complete. 16.07 shipping if you want all of it. Some PMed me for a pair of these and I cleared out PM's and lost who it was. For who ever that was my apology.

20HDriver, Sorry nothing right now.

blackbolt, JJ Shipping is 32.70 it weighs 28lbs

72swbcamo, 11.00 shipped

karphan, Dan, 6.00 shipping

72longbed, Yes 85.00 plus shipping

allons, Shipping for all of it 19.94 and 20.00 for the channels that attach to the glass.
cst204x4,Shipping 24.61

freakshow108, Shipping is 27.40 With packing it is 32x22x11 which is oversize.

Ok,sounds good.I will go for the eyebrow trim pieces(any chance the clips are still with them?) and the tcase support kit if i'am up.Thanks Tom

**tll74** · 01-21-2014, 10:21 PM

68shortfleet, no they are different. I have many of the 2wd's. Yes 40.00 would be fine shipped. PM me your year and model to be sure I get you the correct one.

blackbolt, PM sent

CUSTOM/10 Gary, Sorry I don't have a relay for the 72 only. I need your addy for the shipping cost on the tunnel cover.

mx289 Tom, You are first on the t-case support so it is yours. Not sure on the mounting clips if not I'll look for some and include them if I have them.

jmader, the cab is junk and ready for the scrap yard. I have a nice 71 cab that needs rockers and maybe a portion of floor near the rockers. It is a 4sp non AC. 250.00 on it.

John H., mx289 was first on the t-case support set up. The good news is I have another set up identical to this one with the bolts and the trans/t-case mounts as well. Same prices and pics available.

karphan, Thanks!

sboris, still waiting on cst204x4. I'll give him till tomorrow.

Jimer1964, Shipping on the cross member is 24.26, P/S conversion is 57.10, If I ship them together it would be 71.87.

I looked and compared the e-brake set up to a 72 K20 with the HO72 and it is the same.

DeadheadNM Pete, Your shipping with UPS is 15.05 I owe you a break from the deal we did recently so 7.50 shipping.

**DeadheadNM** · 01-21-2014, 10:42 PM

Tom, thanks not necessary but OK - total looks to be $37.50? PM paypal when poss.

Good to know the D60 cable is similar to HO52!

Best, Pete

**jimer1964** · 01-21-2014, 11:21 PM

tom, was ps pump a leaker? pm payment info

**cst204x4** · 01-22-2014, 12:14 AM

Pm sent

**CUSTOM/10** · 01-22-2014, 07:47 AM

PM Sent

mx289 · 01-22-2014, 06:21 PM

Pm sent.

**jmader** · 01-22-2014, 06:40 PM

Quote:

Originally Posted by tll74

jmader, the cab is junk and ready for the scrap yard. I have a nice 71 cab that needs rockers and maybe a portion of floor near the rockers. It is a 4sp non AC. 250.00 on it.

Does the cab have a title? I'm looking for any GMC 4X4 long box cab with a clean title. Condition is not an issue.

**Sandtrap9072** · 01-22-2014, 11:08 PM

better pics of the gmc hood letters to Nballach@yahoo.com

**tll74** · 01-23-2014, 03:18 AM

Quote:

Originally Posted by jmader

Does the cab have a title? I'm looking for any GMC 4X4 long box cab with a clean title. Condition is not an issue.

The cab mentioned is a 71 C10 2wd. I have a running driving 71 GMC K20 truck for sale if interested? It needs the normal rockers and portion of floor. Actually a pretty nice truck.

Quote:

Originally Posted by Sandtrap9072

better pics of the gmc hood letters to Nballach@yahoo.com

Will do.

Thanks, Tom

slikside · 01-23-2014, 03:22 PM

Tom,

Would you consider parting with the gear shift lever on the steering column if it is for an automatic, and descent driver quality?? If so, I'll take it.

Thanks, Steve

**tll74** · 01-23-2014, 10:03 PM

CUSTOM/10, PM sent with shipping cost. Thanks, Tom

rusty knuckles 5 · 01-23-2014, 10:24 PM

HI! If the left hand spring stop is not sold i will take it thank you! (All THE BEST) ROD

freakshow108 · 01-23-2014, 10:35 PM

I will pass on the shroud, price was fine even with shipping, I found one local. Thank you for your time.

01-20-2014, 11:01 PM	#27
karphan Senior Member Join Date: Nov 2010 Location: Sparks, NV Posts: 258	Re: Parting out 72 GMC K20 4x4 350-TH350 I'll take the steering rag joint. Pm sent for payment info. Thanks, Dan

01-21-2014, 01:34 AM	#28
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 GMC K20 4x4 350-TH350 jimer1964..I'll get shipping cost tomorrow. CUSTOM/10 Gary, It has no extra holes and some minor surface rust on the underside as the pic shows. In my opinion it is a very nice piece. DeadheadNM Pete, Just home from the shop. The cables coming out of the backing plates may be different but i'm thinking the rest is the same. I'll look at my 72 K20 HO72 in the morning. To cold and dark tonight. __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-21-2014, 01:51 AM	#29
John H. Registered User Join Date: Oct 2007 Location: Sammamish, WA Posts: 2,115	Re: Parting out 72 GMC K20 4x4 350-TH350 Can I get closer pictures of the rubber bushings for the transfer case support? Also, can I get the two large bolts on the transfer case that go through the support bracket?

01-21-2014, 03:05 AM	#30
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 GMC K20 4x4 350-TH350 more pics Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-21-2014, 03:16 AM	#31
68shortfleet Registered User Join Date: Oct 2006 Location: Dundee, Oregon Posts: 311	Re: Parting out 72 GMC K20 4x4 350-TH350 Is the rear crossmember the same for 1/2 2wd and 3/4 4x4? Would you do $40 shipped to 97115 on the crossmember?

01-21-2014, 04:36 AM	#32
blackbolt Registered User Join Date: Jan 2008 Location: Pasadena, Texas Posts: 142	Re: Parting out 72 GMC K20 4x4 350-TH350 I'll take the trans crossmember and the trans mounts pm me details of payment thanks JJ Last edited by blackbolt; 01-21-2014 at 08:37 AM.

01-21-2014, 06:31 AM	#33
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,796	Re: Parting out 72 GMC K20 4x4 350-TH350 I'll take the Tunnel cover and a good 72 DS door relay if you have one. PM me the total & payment info when your ready. Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

01-21-2014, 10:08 AM	#34
John H. Registered User Join Date: Oct 2007 Location: Sammamish, WA Posts: 2,115	Re: Parting out 72 GMC K20 4x4 350-TH350 After seeing the closer pics of the TC support, I would like to take it if I am up. I would like the two mounting in the TC too. If the transfer case mounting bushings get to me I will take those too. Any exhaust manifolds?

01-21-2014, 10:57 AM	#35
karphan Senior Member Join Date: Nov 2010 Location: Sparks, NV Posts: 258	Re: Parting out 72 GMC K20 4x4 350-TH350 Payment made for the steering rag joint. PM'd address too. Thanks, Dan

01-21-2014, 02:53 PM	#36
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,485	Re: Parting out 72 GMC K20 4x4 350-TH350 Are you selling the cab? __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

01-21-2014, 10:21 PM	#38
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 GMC K20 4x4 350-TH350 68shortfleet, no they are different. I have many of the 2wd's. Yes 40.00 would be fine shipped. PM me your year and model to be sure I get you the correct one. blackbolt, PM sent CUSTOM/10 Gary, Sorry I don't have a relay for the 72 only. I need your addy for the shipping cost on the tunnel cover. mx289 Tom, You are first on the t-case support so it is yours. Not sure on the mounting clips if not I'll look for some and include them if I have them. jmader, the cab is junk and ready for the scrap yard. I have a nice 71 cab that needs rockers and maybe a portion of floor near the rockers. It is a 4sp non AC. 250.00 on it. John H., mx289 was first on the t-case support set up. The good news is I have another set up identical to this one with the bolts and the trans/t-case mounts as well. Same prices and pics available. karphan, Thanks! sboris, still waiting on cst204x4. I'll give him till tomorrow. Jimer1964, Shipping on the cross member is 24.26, P/S conversion is 57.10, If I ship them together it would be 71.87. I looked and compared the e-brake set up to a 72 K20 with the HO72 and it is the same. DeadheadNM Pete, Your shipping with UPS is 15.05 I owe you a break from the deal we did recently so 7.50 shipping. __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-21-2014, 10:42 PM	#39
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,285	Re: Parting out 72 GMC K20 4x4 350-TH350 Tom, thanks not necessary but OK - total looks to be $37.50? PM paypal when poss. Good to know the D60 cable is similar to HO52! Best, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

01-21-2014, 11:21 PM	#40
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,677	Re: Parting out 72 GMC K20 4x4 350-TH350 tom, was ps pump a leaker? pm payment info

01-22-2014, 12:14 AM	#41
cst204x4 Registered User Join Date: Jan 2012 Location: corunna michigan Posts: 1,999	Re: Parting out 72 GMC K20 4x4 350-TH350 Pm sent __________________ 1970 CST 4x4 collecting nos parts for this project 1972 cutlass owned since 1984 1972 cutlass conv 1970 Cutlass conv 1981 chevy shortbox 1986 grand national 2004 2500HD Crew Cab 66,000 miles

01-22-2014, 07:47 AM	#42
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,796	Re: Parting out 72 GMC K20 4x4 350-TH350 PM Sent __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859



Register or Log In To remove these advertisements.

01-22-2014, 06:21 PM	#43
mx289 Registered User Join Date: May 2013 Location: wall,nj Posts: 865	Re: Parting out 72 GMC K20 4x4 350-TH350 Pm sent.

01-22-2014, 11:08 PM	#45
Sandtrap9072 Senior Member Join Date: Apr 2012 Location: Michigan Posts: 388	Re: Parting out 72 GMC K20 4x4 350-TH350 better pics of the gmc hood letters to Nballach@yahoo.com

01-23-2014, 03:22 PM	#47
slikside Registered User Join Date: Jun 2010 Location: San Diego Co. Posts: 1,145	Re: Parting out 72 GMC K20 4x4 350-TH350 Tom, Would you consider parting with the gear shift lever on the steering column if it is for an automatic, and descent driver quality?? If so, I'll take it. Thanks, Steve __________________ 1972 Chevy C-10, SWB, Fleet, 350/350, PS, PB, all stock, Survivor.

01-23-2014, 10:03 PM	#48
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 GMC K20 4x4 350-TH350 CUSTOM/10, PM sent with shipping cost. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-23-2014, 10:24 PM	#49
rusty knuckles 5 Registered User Join Date: Dec 2011 Location: coulterville calif Posts: 263	Re: Parting out 72 GMC K20 4x4 350-TH350 HI! If the left hand spring stop is not sold i will take it thank you! (All THE BEST) ROD

01-23-2014, 10:35 PM	#50
freakshow108 Registered User Join Date: May 2010 Location: Eatonville WA Posts: 296	Re: Parting out 72 GMC K20 4x4 350-TH350 I will pass on the shroud, price was fine even with shipping, I found one local. Thank you for your time.

Register or Log In To remove these advertisements.