Hydroboost Mounting Plates

[DonLeverton]

Originally Posted by Captainfab

I haven't done one myself yet, but I have looked at several. They're really not that hard to plumb. There are a few places that sell either ready made SS braided hose sets, or you can piece your own together. I'll make sure you find what you need to complete your install.

Here’s some bling with a purpose!
PSC makes a hydroboost reservoir that filters and “calms” the fluid by settling out the aeration. JEGS/Summit makes a chrome remote pump reservoir with an AN12 (if I recall correctly?) return fitting.
What you see on that PSC can right now are braided - covered rubber hose with barbed fittings and hose clamp covers. I will be replacing them with “real” PTFE hose and hose ends.
Every fitting on my steering box, pump, and hydroboost is 45* flare fittings, so it’s just a matter of using adapters (from JEGS) to convert them to AN.
I’m hoping it will look “pro” when I get it all assembled
Posted via Mobile Device