Where can I get this type of connector? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70c10 · 11-17-2004, 02:46 PM

Do they sell the connector for this end of the temp ssending unit at the parts store or do I have to go to the junk yard?. The factory connector is missing from the harness.

**CPNE** · 11-17-2004, 02:55 PM

Buy an assortment of crimp-on wire connectors and ends. One of the ends in that assortment designed to slide onto spade connectors can be used. You may have to widen the gap on the connector some...or you can go to a JY and splice on the GM unit.

70c10 · 11-17-2004, 02:59 PM

Thanks CPNE, I'll probably go to the junk yard to keep the factory style connector.

grayw0lf · 11-17-2004, 03:00 PM

Mine was missing as well. I do not know where you can find teh connector, but I do kno wa work around that doesn't look too bad. Take a normal female spade type connector & bend it slightly open so it will slide on, & then pinch it shut again. it will hold itself in place just fine.

70c10 · 11-17-2004, 03:10 PM

Sounds like an easy "Plan B"

fatfords · 11-17-2004, 04:39 PM

You can get the metal crimp contact from Mad Electrical http://www.madelectrical.com/catalog/flat-blade.shtml

Part number 56F is what you will need. The plastic part can be made from most any single wire female connector housing by cutting a groove in one side of the plastic so the pin contact can slide into the female contact.

Good Luck!

1-PU70 · 11-17-2004, 05:36 PM

Here you go
http://www.ecklers.com/product.asp?p...9FCWUJL3A34VN4

OhioDan · 11-17-2004, 09:36 PM

Is there an auto electrical place in your town? If so, they would have the connector you want also. Won't have to scrounge junk yards that way. Just my $.02 .

11-17-2004, 02:46 PM	#1
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Where can I get this type of connector? Do they sell the connector for this end of the temp ssending unit at the parts store or do I have to go to the junk yard?. The factory connector is missing from the harness. Attached Images __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

11-17-2004, 02:55 PM	#2
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Buy an assortment of crimp-on wire connectors and ends. One of the ends in that assortment designed to slide onto spade connectors can be used. You may have to widen the gap on the connector some...or you can go to a JY and splice on the GM unit. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

11-17-2004, 02:59 PM	#3
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Thanks CPNE, I'll probably go to the junk yard to keep the factory style connector. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

11-17-2004, 03:00 PM	#4
grayw0lf Registered User Join Date: Apr 2004 Location: Clanton, AL Posts: 1,253	Mine was missing as well. I do not know where you can find teh connector, but I do kno wa work around that doesn't look too bad. Take a normal female spade type connector & bend it slightly open so it will slide on, & then pinch it shut again. it will hold itself in place just fine. __________________ 85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days! 05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal!

11-17-2004, 03:10 PM	#5
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Sounds like an easy "Plan B" __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

11-17-2004, 04:39 PM	#6
fatfords Registered User Join Date: Sep 2002 Location: DFW, TX Posts: 350	You can get the metal crimp contact from Mad Electrical http://www.madelectrical.com/catalog/flat-blade.shtml Part number 56F is what you will need. The plastic part can be made from most any single wire female connector housing by cutting a groove in one side of the plastic so the pin contact can slide into the female contact. Good Luck! __________________ '56 F-100 (w/all GM stuff) Lookin' for another parts chaser! '05 GMC crew cab

11-17-2004, 05:36 PM	#7
1-PU70 Registered User Join Date: Apr 2000 Location: Bradenton, FL Posts: 1,036	Here you go http://www.ecklers.com/product.asp?p...9FCWUJL3A34VN4 __________________ 1970 CST/10 402,700R4,3:73 posi,AC,PS,PB,TLT,PW,Buckets with heaters

11-17-2004, 09:36 PM	#8
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	Is there an auto electrical place in your town? If so, they would have the connector you want also. Won't have to scrounge junk yards that way. Just my $.02 . __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.