Dumb Question (follow up to my posi-trac post) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tejanopirate · 02-12-2020, 01:40 PM

I'm having a hard time finding the clutch pack guide clips to go behind the side gears in my differential. It seems to me that the spline count is really just a matter of the internals on the side gears in the carrier housing. If I were to switch those out with a posi-trac system, could I then just get axles with a spline count to match the internals of the posi-trac to make it all work?

**mongocanfly** · 02-12-2020, 02:23 PM

What axle do you have? Are you referring to the "c" clips as to what you need?

tejanopirate · 02-12-2020, 02:25 PM

I've got the H032/033 axle. The clips I'm referring to are the guide clips for the clutch packs behind the side gears of the differential .

**mongocanfly** · 02-12-2020, 03:13 PM

I got this pic from another thread....is the circled part what you need?...
http://67-72chevytrucks.com/vboard/s...d.php?t=733151

tejanopirate · 02-12-2020, 04:21 PM

Yessir. That's it. We're discussing fabricating some here, but still

02-12-2020, 01:40 PM	#1
tejanopirate Registered User Join Date: Sep 2019 Location: Georgetown, CA Posts: 13	Dumb Question (follow up to my posi-trac post) I'm having a hard time finding the clutch pack guide clips to go behind the side gears in my differential. It seems to me that the spline count is really just a matter of the internals on the side gears in the carrier housing. If I were to switch those out with a posi-trac system, could I then just get axles with a spline count to match the internals of the posi-trac to make it all work?

02-12-2020, 02:23 PM	#2
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,587	Re: Dumb Question (follow up to my posi-trac post) What axle do you have? Are you referring to the "c" clips as to what you need? __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

02-12-2020, 02:25 PM	#3
tejanopirate Registered User Join Date: Sep 2019 Location: Georgetown, CA Posts: 13	Re: Dumb Question (follow up to my posi-trac post) I've got the H032/033 axle. The clips I'm referring to are the guide clips for the clutch packs behind the side gears of the differential .

02-12-2020, 03:13 PM	#4
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,587	Re: Dumb Question (follow up to my posi-trac post) I got this pic from another thread....is the circled part what you need?... http://67-72chevytrucks.com/vboard/s...d.php?t=733151 Attached Images __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

02-12-2020, 04:21 PM	#5
tejanopirate Registered User Join Date: Sep 2019 Location: Georgetown, CA Posts: 13	Re: Dumb Question (follow up to my posi-trac post) Yessir. That's it. We're discussing fabricating some here, but still



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.