Yet ANOTHER blazer tank question?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

see ten · 02-24-2009, 08:27 PM

I'm sure that this has been posted somewhere (probably multiple times) but it's just not jumping out at me. How far below the frame does the blazer tank hang once installed?

Thanks guys!

oldblue1968chevy · 02-24-2009, 08:35 PM

free bump i wanna know too

chevydog66 · 02-24-2009, 09:15 PM

Yep, me too. I will be doing this in a few weeks when the weather warms up a bit.

texanidiot25 · 02-24-2009, 09:18 PM

bump, may do the same son, would like to know.

caja_larga · 02-24-2009, 09:34 PM

http://www.brotherstrucks.com/techar...%20GAS%20TANK%

here a link to instructiob on brothers web site. I think the kit hangs down wat to much..

**VetteVet** · 02-24-2009, 09:37 PM

Is this what you need from the FAQS.
http://www.67-72chevytrucks.com/vboa...d.php?t=234732

**Palf70Step** · 02-24-2009, 09:41 PM

Here is mine.

From the frame rail down it's about 8 inches. This is with an original 72 Blazer tank, not a repo unit so not sure if they would hang lower or not.

texanidiot25 · 02-24-2009, 10:09 PM

What's the height from the ground to your rear wheel arch?

My CST10 is lowered some.

see ten · 02-24-2009, 10:12 PM

Quote:

Originally Posted by VetteVet

Is this what you need from the FAQS.
http://www.67-72chevytrucks.com/vboa...d.php?t=234732

Yep....I knew that was there....I was just WAY to lazy to search all those posts hoping for a measurement.

Thanks Palf

Sammy · 02-24-2009, 10:25 PM

With stock new rear springs I get 9 inches clearance under the tank on level ground. If you are worried about the clearances you could make a skid plate. Myself I want another 3 inch drop springs in the rear. Here is a pic before I installed the bumper n after.

oldblue1968chevy · 02-25-2009, 05:34 PM

yikes that hangs down alot on the green truck.......

now get a lowered pic lol

see ten · 02-25-2009, 05:59 PM

My tailpipe tips are hanging approximately 6" lower then the frame. I've been told more then once that they look close to dragging when pullng in and out of steep driveways and parking lots. Looks like I need another option.

02-24-2009, 08:27 PM	#1
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,073	Yet ANOTHER blazer tank question?? I'm sure that this has been posted somewhere (probably multiple times) but it's just not jumping out at me. How far below the frame does the blazer tank hang once installed? Thanks guys!

02-24-2009, 08:35 PM	#2
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Yet ANOTHER blazer tank question?? free bump i wanna know too __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

02-24-2009, 09:15 PM	#3
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: Yet ANOTHER blazer tank question?? Yep, me too. I will be doing this in a few weeks when the weather warms up a bit. __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

02-24-2009, 09:18 PM	#4
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: Yet ANOTHER blazer tank question?? bump, may do the same son, would like to know.

02-24-2009, 09:34 PM	#5
caja_larga Registered User Join Date: Oct 2007 Location: Tucson, Az Posts: 172	Re: Yet ANOTHER blazer tank question?? http://www.brotherstrucks.com/techar...%20GAS%20TANK% here a link to instructiob on brothers web site. I think the kit hangs down wat to much..

02-24-2009, 09:37 PM	#6
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,703	Re: Yet ANOTHER blazer tank question?? Is this what you need from the FAQS. http://www.67-72chevytrucks.com/vboa...d.php?t=234732 __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.

02-24-2009, 09:41 PM	#7
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,642	Re: Yet ANOTHER blazer tank question?? Here is mine. From the frame rail down it's about 8 inches. This is with an original 72 Blazer tank, not a repo unit so not sure if they would hang lower or not. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 02-24-2009 at 09:53 PM.

02-24-2009, 10:09 PM	#8
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: Yet ANOTHER blazer tank question?? What's the height from the ground to your rear wheel arch? My CST10 is lowered some.

02-24-2009, 10:25 PM	#10
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Yet ANOTHER blazer tank question?? With stock new rear springs I get 9 inches clearance under the tank on level ground. If you are worried about the clearances you could make a skid plate. Myself I want another 3 inch drop springs in the rear. Here is a pic before I installed the bumper n after. Attached Images __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

02-25-2009, 05:34 PM	#11
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Yet ANOTHER blazer tank question?? yikes that hangs down alot on the green truck....... now get a lowered pic lol __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

02-25-2009, 05:59 PM	#12
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,073	Re: Yet ANOTHER blazer tank question?? My tailpipe tips are hanging approximately 6" lower then the frame. I've been told more then once that they look close to dragging when pullng in and out of steep driveways and parking lots. Looks like I need another option.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.