KS parting out 72 GMC LB BB - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Cash3481** · 01-30-2012, 10:44 PM

I bought this truck to help get me a new set of gears and a set of buckets seats and a console for my 72 GMC SWB BB. All parts do not include shipping but I will be at the Wichita Swap meet this weekend so if there is something you want Ill bring it there for you. Doors are already broken down. I will do my best to stay on top of this thread but I'm no professional like Randy. Ill take pics of everything you need but I am in the Military full time and doing this in the evening and on the weekend.
Please reply in thread and no PMs untill "Ill take is said. To keep this as fair as possible for all I will give 24 hours to anyone before moving on.
2. Grille brace- This is good no rust- $10 plus shipping
3. Hood latch-- $15.00 plus shipping
4. Hood pin and latch plate (attaches to hood)-- $6.00
5.Front Disc Brakes and suspension-- $125 Pickup only
11. Core support to fender brace-- $15 a set I have 4 sets
12. Rear end- $150
13. Tailgate support links and trunions-- $10.00 pair
15. Heater hose clip/ bracket-- $2.00
24. Carrier bearing bracket-- rivets to the trailing arm cross member-- $15.00
29. Tail light harness, has t-taps for trailer plug-- $25.00
30. Harness from firewall to taillight harness-- $10.00
31. Headlight harness-- $18.00
34. Deluxe dash knobs -- $20.00
41. Black Glove box-- $20.00
43. Tail light housings lenses and markers (pkg deal)-- $20.00
47. Core Support-- $50.00 for the GMC
48. Running 402 Motor (runs but slight knock after warmup)-- $300
49. 400 Trans(worked to put in on the trailer) $100.00
51. D/S Headlight bezel-- $20.00
55. Door hardwear $20.00
60. Cowl panel-- $20
61. Driveshaft-- $20.00 NO shipping
62. Cig. lighter-- $5
63. Automatic Transmission Cross member-- $35.00 sold

Not sure how I could have missed anything. Im open to corrections on the prices if I'm off base.

**jimer1964** · 01-30-2012, 10:50 PM

hi interested in sun visors and clips shipped to pa 19320 if you could post a pic? thanks

**jimer1964** · 01-30-2012, 10:56 PM

hey if the visors are nice as you say i will take them thanks

72cheyenneman · 01-30-2012, 11:00 PM

I'll buy the door hinge bolts, if you have them--there should be 24 of them. If you don't have 24, how many do you have? Ship to 70065. Thanks, Casey

tooter · 01-30-2012, 11:01 PM

How much for10-17-33- 65-66 shipped to 39562

6.0 1955 · 01-30-2012, 11:04 PM

Total for brake booster, master cylinder, and prop. Valve shipped to 41101? I would also need the rod from pedal into booster. Thanks
Posted via Mobile Device

**Cash3481** · 01-30-2012, 11:21 PM

WOW, I guess I need to figure out shipping fast!
Ill work on that one tomorrow am.

Jimmer1964: $20 plus shipping

tooter: $120 If my math is correct plus shipping

6.0 1955: $50 still and Ill get shipping tomorrow.

If someone knows a better way to get shipping quotes Im all ears!

Teeitup, How do you do this?

You are my new hero.

**Cash3481** · 01-30-2012, 11:24 PM

72cheyenneman; Casey $5 If they all come out good plus shipping in the smallest box I can get them in. Mike

tooter · 01-30-2012, 11:25 PM

Works for me if shipping don't kill it...

72cheyenneman · 01-30-2012, 11:30 PM

Quote:

Originally Posted by Cash3481

72cheyenneman; Casey $5 If they all come out good plus shipping in the smallest box I can get them in. Mike

I'll take them as soon as you can get them....ASAP! PM me with the total and your e:mail and I'll send a PayPal payment.

72cheyenneman · 01-30-2012, 11:35 PM

The easiest way to start shipping is to pick up a cheap digital scale, box the items and weigh them, and list the weight for the item. The buyers can figure out the freight according to their zip code, or you can quote the freight charges by looking them up at UPS.com or for smaller items, USPS.com (post office).

Hope this helps...Casey

teeitup · 01-30-2012, 11:38 PM

Hey Mike, you sitting up at the swap meet? I'm headed down there Fri morning I think. Also on your motor mounts is that complete frame mounts and motor cups? Thanks Randy

chewychevy67 · 01-30-2012, 11:46 PM

I will take the exhaust hangers pending pictures are what i need and that you will ship to Canada through USPS? Postal code is S0K2T0. Rod.

mcbassin · 01-30-2012, 11:46 PM

Interested in #30 harness if no cuts or splices.

**Cash3481** · 01-30-2012, 11:48 PM

Quote:

Originally Posted by 72cheyenneman

The easiest way to start shipping is to pick up a cheap digital scale, box the items and weigh them, and list the weight for the item. The buyers can figure out the freight according to their zip code, or you can quote the freight charges by looking them up at UPS.com or for smaller items, USPS.com (post office).

Hope this helps...Casey

It does and Ill get those off tomorrow for you!

Quote:

Originally Posted by 72cheyenneman

I'll take them as soon as you can get them....ASAP! PM me with the total and your e:mail and I'll send a PayPal payment.

PM you in a few!

Quote:

Originally Posted by teeitup

Hey Mike, you sitting up at the swap meet? I'm headed down there Fri morning I think. Also on your motor mounts is that complete frame mounts and motor cups? Thanks Randy

Randy, I do not have a booth. Ill be there though. If your there Ill stop by youe booth.
First truck I've parted and just to get what I need. I also have a very nice blasted core support thats already painted, a perfect green A/C dash and a D/S cheyenne super fender that has holes for trim I dont need. I want one without holes and bronze if I can.

teeitup · 01-30-2012, 11:52 PM

Mike, I'm not sitting up, I'm just going to walk around and look. Have fun parting, its alot of fun

**Cash3481** · 01-31-2012, 12:03 AM

Quote:

Originally Posted by teeitup

Mike, I'm not sitting up, I'm just going to walk around and look. Have fun parting, its alot of fun

Ill be there on Friday am, If Im not parting this thing out still. either way I need those buckets and they always have lots to look through. Let me know through PM when your going to be around and ill pick your brain for advice. If my trannys rebuilt by then and installed, I may take the 72 for its first run with the new tranny.
Mike

HDBOB · 01-31-2012, 12:03 AM

I will take the instr cluster assy pending condition and shipping to nh03249

**Cash3481** · 01-31-2012, 12:04 AM

Quote:

Originally Posted by mcbassin

Interested in #30 harness if no cuts or splices.

Ill get under there tomorrow and let you know!

**Cash3481** · 01-31-2012, 12:05 AM

Quote:

Originally Posted by HDBOB

I will take the instr cluster assy pending condition and shipping to nh03249

HDBOB: Ill get it out this weekend and post a pic front and back for you!

HDBOB · 01-31-2012, 12:06 AM

oh ya, and batt hold down bracket and bolt (if avail) , lower driver door trim if woodgrain. let me know. Thanks !!

**Cash3481** · 01-31-2012, 12:10 AM

Quote:

Originally Posted by Cash3481

It does and Ill get those off tomorrow for you!

PM you in a few!

Randy, I do not have a booth. Ill be there though. If your there Ill stop by youe booth.
First truck I've parted and just to get what I need. I also have a very nice blasted core support thats already painted, a perfect green A/C dash and a D/S cheyenne super fender that has holes for trim I dont need. I want one without holes and bronze if I can.

Randy, forgot your answer to the motor mount question, yes both to you for all the things youve sold me and questions answered.

**Cash3481** · 01-31-2012, 12:13 AM

Quote:

Originally Posted by HDBOB

oh ya, and batt hold down bracket and bolt (if avail) , lower driver door trim if woodgrain. let me know. Thanks !!

HDBOB: tooter gets the bolt and bracket (If I dont ruin it taking it off)
Lower door molding is black not woodgrain. sorry, Mike

**71blksuper4x4** · 01-31-2012, 12:20 AM

Fan Shroud? Thanks Trevor

DD1 · 01-31-2012, 12:41 AM

I would like:

#59 - pending price; how much for the outer heater box by itself? If I just buy #36, can you post some pics of the parts? I would like to see the lines cut into the evaporator.
#57 - A/C Heater controls (levers seem good and move)--$20
#10 - Washer Jug-- $5 (can you include the bracket?)
#33 - Dome light-- $8.00

I also need the center and two outer vents; don't see them in the list, but could be missing them, how much for them? Also, I think there are vent panels on the top as well? If so, could use those as well. Basically anything that has to do with air blowing into the truck, except for the inner heater box.

I am switching from a non-A/C cab to an A/C cab.

Can you post a better photo of the door panels?

Please provide pricing shipped to 10901. Thanks!

01-30-2012, 10:50 PM	#2
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,680	Re: parting out 72 GMC LB BB hi interested in sun visors and clips shipped to pa 19320 if you could post a pic? thanks

01-30-2012, 11:00 PM	#4
72cheyenneman Registered User Join Date: Nov 2009 Location: New Orleans, Louisiana Posts: 610	Re: parting out 72 GMC LB BB I'll buy the door hinge bolts, if you have them--there should be 24 of them. If you don't have 24, how many do you have? Ship to 70065. Thanks, Casey

01-30-2012, 11:04 PM	#6
6.0 1955 Registered User Join Date: Jul 2011 Location: Ashland, KY Posts: 91	Re: parting out 72 GMC LB BB Total for brake booster, master cylinder, and prop. Valve shipped to 41101? I would also need the rod from pedal into booster. Thanks Posted via Mobile Device

01-30-2012, 11:21 PM	#7
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB WOW, I guess I need to figure out shipping fast! Ill work on that one tomorrow am. Jimmer1964: $20 plus shipping tooter: $120 If my math is correct plus shipping 6.0 1955: $50 still and Ill get shipping tomorrow. If someone knows a better way to get shipping quotes Im all ears! Teeitup, How do you do this? You are my new hero.

01-30-2012, 11:24 PM	#8
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB 72cheyenneman; Casey $5 If they all come out good plus shipping in the smallest box I can get them in. Mike

01-30-2012, 10:44 PM	#1
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	parting out 72 GMC LB BB I bought this truck to help get me a new set of gears and a set of buckets seats and a console for my 72 GMC SWB BB. All parts do not include shipping but I will be at the Wichita Swap meet this weekend so if there is something you want Ill bring it there for you. Doors are already broken down. I will do my best to stay on top of this thread but I'm no professional like Randy. Ill take pics of everything you need but I am in the Military full time and doing this in the evening and on the weekend. Please reply in thread and no PMs untill "Ill take is said. To keep this as fair as possible for all I will give 24 hours to anyone before moving on. 2. Grille brace- This is good no rust- $10 plus shipping 3. Hood latch-- $15.00 plus shipping 4. Hood pin and latch plate (attaches to hood)-- $6.00 5.Front Disc Brakes and suspension-- $125 Pickup only 11. Core support to fender brace-- $15 a set I have 4 sets 12. Rear end- $150 13. Tailgate support links and trunions-- $10.00 pair 15. Heater hose clip/ bracket-- $2.00 24. Carrier bearing bracket-- rivets to the trailing arm cross member-- $15.00 29. Tail light harness, has t-taps for trailer plug-- $25.00 30. Harness from firewall to taillight harness-- $10.00 31. Headlight harness-- $18.00 34. Deluxe dash knobs -- $20.00 41. Black Glove box-- $20.00 43. Tail light housings lenses and markers (pkg deal)-- $20.00 47. Core Support-- $50.00 for the GMC 48. Running 402 Motor (runs but slight knock after warmup)-- $300 49. 400 Trans(worked to put in on the trailer) $100.00 51. D/S Headlight bezel-- $20.00 55. Door hardwear $20.00 60. Cowl panel-- $20 61. Driveshaft-- $20.00 NO shipping 62. Cig. lighter-- $5 63. Automatic Transmission Cross member-- $35.00 sold Not sure how I could have missed anything. Im open to corrections on the prices if I'm off base. Attached Images Last edited by Cash3481; 04-01-2012 at 01:17 AM. Reason: Added sold and pending and deleted for clarity

01-30-2012, 10:56 PM	#3
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,680	Re: parting out 72 GMC LB BB hey if the visors are nice as you say i will take them thanks

01-30-2012, 11:01 PM	#5
tooter Registered User Join Date: Dec 2010 Location: Moss Point , Ms Posts: 1,342	Re: parting out 72 GMC LB BB How much for10-17-33- 65-66 shipped to 39562 __________________ My Ole 67 http://67-72chevytrucks.com/vboard/s...d.php?t=505830

01-30-2012, 11:25 PM	#9
tooter Registered User Join Date: Dec 2010 Location: Moss Point , Ms Posts: 1,342	Re: parting out 72 GMC LB BB Works for me if shipping don't kill it... __________________ My Ole 67 http://67-72chevytrucks.com/vboard/s...d.php?t=505830

01-30-2012, 11:35 PM	#11
72cheyenneman Registered User Join Date: Nov 2009 Location: New Orleans, Louisiana Posts: 610	Re: parting out 72 GMC LB BB The easiest way to start shipping is to pick up a cheap digital scale, box the items and weigh them, and list the weight for the item. The buyers can figure out the freight according to their zip code, or you can quote the freight charges by looking them up at UPS.com or for smaller items, USPS.com (post office). Hope this helps...Casey

01-30-2012, 11:38 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting out 72 GMC LB BB Hey Mike, you sitting up at the swap meet? I'm headed down there Fri morning I think. Also on your motor mounts is that complete frame mounts and motor cups? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-30-2012, 11:46 PM	#13
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,421	Re: parting out 72 GMC LB BB I will take the exhaust hangers pending pictures are what i need and that you will ship to Canada through USPS? Postal code is S0K2T0. Rod.

01-30-2012, 11:46 PM	#14
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: parting out 72 GMC LB BB Interested in #30 harness if no cuts or splices. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

01-30-2012, 11:52 PM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting out 72 GMC LB BB Mike, I'm not sitting up, I'm just going to walk around and look. Have fun parting, its alot of fun __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-31-2012, 12:03 AM	#18
HDBOB Registered User Join Date: Jan 2011 Location: laconia NH Posts: 196	Re: parting out 72 GMC LB BB I will take the instr cluster assy pending condition and shipping to nh03249



Register or Log In To remove these advertisements.

01-31-2012, 12:06 AM	#21
HDBOB Registered User Join Date: Jan 2011 Location: laconia NH Posts: 196	Re: parting out 72 GMC LB BB oh ya, and batt hold down bracket and bolt (if avail) , lower driver door trim if woodgrain. let me know. Thanks !!

01-31-2012, 12:20 AM	#24
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,149	Re: parting out 72 GMC LB BB Fan Shroud? Thanks Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

01-31-2012, 12:41 AM	#25
DD1 Registered User Join Date: Aug 2011 Location: new york, ny Posts: 1,063	Re: parting out 72 GMC LB BB I would like: #59 - pending price; how much for the outer heater box by itself? If I just buy #36, can you post some pics of the parts? I would like to see the lines cut into the evaporator. #57 - A/C Heater controls (levers seem good and move)--$20 #10 - Washer Jug-- $5 (can you include the bracket?) #33 - Dome light-- $8.00 I also need the center and two outer vents; don't see them in the list, but could be missing them, how much for them? Also, I think there are vent panels on the top as well? If so, could use those as well. Basically anything that has to do with air blowing into the truck, except for the inner heater box. I am switching from a non-A/C cab to an A/C cab. Can you post a better photo of the door panels? Please provide pricing shipped to 10901. Thanks!

Register or Log In To remove these advertisements.