The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > Heavy Haulers

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-15-2020, 07:00 PM   #1
Pvmt-Pndr
Registered User
 
Join Date: Jun 2017
Location: Temperance Michigan
Posts: 297
Studs and torque Daytons

I have a few questions.

I pulled my rear tires off the truck to put my new ones on. While I was there I pulled the axle shaft out to fix a leak. What are the torque specs on the 12 studs that hold the axle in place? It does have the notched and tapered retainers behind them and I don't want to over tighten them.

While getting the nuts loose I managed to break a stud too.... since its 90+ degrees out I stopped there. The truck is on Jack stands until I sand blast and paint everything that has surface rust while I have acces to it. I did spray it with kroil and will add more later. Rear axle is a 17221.

What are the rough torque specs when installing the tires when I put them back on?

Also if anyone wants my old 20" rims and tires I won't have a use for them. 2 bald rears and 2 steer tires with good tread but cracking. I would use them on a farm but that's about it.
__________________
Slow going build thread:
http://67-72chevytrucks.com/vboard/s...d.php?t=785450

Last edited by Pvmt-Pndr; 07-15-2020 at 07:21 PM.
Pvmt-Pndr is online now   Reply With Quote
Old 07-16-2020, 10:31 PM   #2
Bimus
Registered User
 
Join Date: Dec 2018
Location: Farmington NM
Posts: 63
Re: Studs and torque Daytons

For torque on the Dayton wheel studs .
1/2 stud with 13 threads per inch 87 to 93 ft pounds
5/8 stud with 11 threads per inch 150 to 175 ft pounds
3/4 stud with 10 threads per inch 175 to 200 ft pounds
Bimus is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:43 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com